# Makefile.in generated by automake 1.16.5 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2021 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# Make Autoconf.

# Copyright (C) 1999-2004, 2006-2017, 2020-2023 Free Software
# Foundation, Inc.

# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <https://www.gnu.org/licenses/>.

# Freeze M4 files.

# Copyright (C) 2002, 2004, 2006-2017, 2020-2023 Free Software
# Foundation, Inc.

# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <https://www.gnu.org/licenses/>.

# Make Autoconf commands.

# Copyright (C) 1999-2007, 2009-2017, 2020-2023 Free Software
# Foundation, Inc.

# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <https://www.gnu.org/licenses/>.

# Make Autoconf documentation.

# Copyright (C) 2000-2003, 2007-2017, 2020-2023 Free Software
# Foundation, Inc.

# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <https://www.gnu.org/licenses/>.

# Make Autoconf-related libraries.

# Copyright (C) 2001-2005, 2009-2017, 2020-2023 Free Software
# Foundation, Inc.

# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <https://www.gnu.org/licenses/>.

# Make Autoconf man pages.

# Copyright (C) 2001, 2004-2017, 2020-2023 Free Software Foundation,
# Inc.

# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <https://www.gnu.org/licenses/>.

# Copyright (C) 2000-2017, 2020-2023 Free Software Foundation, Inc.

# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <https://www.gnu.org/licenses/>.



VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
@MAKE_CASE_SENSITIVE_TRUE@am__append_1 = $(srcdir)/INSTALL
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \
	$(top_srcdir)/m4/m4.m4 $(top_srcdir)/m4/make-case.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
	$(am__configure_deps) $(srcdir)/doc/version.texi \
	$(srcdir)/doc/stamp-vti $(dist_lisp_LISP) \
	$(dist_autoconflib_DATA) $(dist_autotestlib_DATA) \
	$(dist_buildaux_DATA) $(dist_m4sugarlib_DATA) \
	$(dist_perllib_DATA) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES = tests/atlocal lib/version.m4
CONFIG_CLEAN_VPATH_FILES = GNUmakefile
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" \
	"$(DESTDIR)$(lispdir)" "$(DESTDIR)$(man1dir)" \
	"$(DESTDIR)$(autoconflibdir)" "$(DESTDIR)$(autotestlibdir)" \
	"$(DESTDIR)$(buildauxdir)" "$(DESTDIR)$(m4sugarlibdir)" \
	"$(DESTDIR)$(perllibdir)" "$(DESTDIR)$(autoconflibdir)" \
	"$(DESTDIR)$(autoscanlibdir)" "$(DESTDIR)$(autotestlibdir)" \
	"$(DESTDIR)$(m4sugarlibdir)" "$(DESTDIR)$(pkgdatadir)" \
	"$(DESTDIR)$(pkgdatadir)"
SCRIPTS = $(bin_SCRIPTS) $(noinst_SCRIPTS)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
am__v_DVIPS_0 = @echo "  DVIPS   " $@;
am__v_DVIPS_1 = 
AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
am__v_MAKEINFO_0 = @echo "  MAKEINFO" $@;
am__v_MAKEINFO_1 = 
AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
am__v_INFOHTML_0 = @echo "  INFOHTML" $@;
am__v_INFOHTML_1 = 
AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
am__v_TEXI2DVI_0 = @echo "  TEXI2DVI" $@;
am__v_TEXI2DVI_1 = 
AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
am__v_TEXI2PDF_0 = @echo "  TEXI2PDF" $@;
am__v_TEXI2PDF_1 = 
AM_V_texinfo = $(am__v_texinfo_@AM_V@)
am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
am__v_texinfo_0 = -q
am__v_texinfo_1 = 
AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
am__v_texidevnull_0 = > /dev/null
am__v_texidevnull_1 = 
am__dirstamp = $(am__leading_dot)dirstamp
INFO_DEPS = $(srcdir)/doc/autoconf.info $(srcdir)/doc/standards.info
am__TEXINFO_TEX_DIR = $(srcdir)/build-aux
DVIS = doc/autoconf.dvi doc/standards.dvi
PDFS = doc/autoconf.pdf doc/standards.pdf
PSS = doc/autoconf.ps doc/standards.ps
HTMLS = doc/autoconf.html doc/standards.html
TEXINFOS = doc/autoconf.texi doc/standards.texi
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__emacs_byte_compile_setup = \
  (if (boundp (quote byte-compile-dest-file-function)) \
    (setq byte-compile-dest-file-function (lambda (_) "$@")) \
    (defun byte-compile-dest-file (_) "$@") \
  )
dist_lispLISP_INSTALL = $(INSTALL_DATA)
LISP = $(dist_lisp_LISP)
am__ELFILES = lib/emacs/autoconf-mode.el lib/emacs/autotest-mode.el
am__ELCFILES = $(am__ELFILES:.el=.elc)
ELCFILES = $(LISP:.el=.elc)
man1dir = $(mandir)/man1
NROFF = nroff
MANS = $(dist_man_MANS)
DATA = $(dist_autoconflib_DATA) $(dist_autotestlib_DATA) \
	$(dist_buildaux_DATA) $(dist_m4sugarlib_DATA) \
	$(dist_perllib_DATA) $(nodist_autoconflib_DATA) \
	$(nodist_autoscanlib_DATA) $(nodist_autotestlib_DATA) \
	$(nodist_m4sugarlib_DATA) $(nodist_pkgdata_DATA) \
	$(pkgdata_DATA)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
AM_RECURSIVE_TARGETS = cscope
am__DIST_COMMON = $(dist_man_MANS) $(doc_autoconf_TEXINFOS) \
	$(doc_standards_TEXINFOS) $(srcdir)/GNUmakefile \
	$(srcdir)/Makefile.in $(srcdir)/bin/local.mk \
	$(srcdir)/doc/local.mk $(srcdir)/lib/freeze.mk \
	$(srcdir)/lib/local.mk $(srcdir)/man/local.mk \
	$(srcdir)/tests/local.mk $(top_srcdir)/build-aux/config.guess \
	$(top_srcdir)/build-aux/config.sub \
	$(top_srcdir)/build-aux/install-sh \
	$(top_srcdir)/build-aux/mdate-sh \
	$(top_srcdir)/build-aux/missing $(top_srcdir)/lib/version.in \
	$(top_srcdir)/tests/atlocal.in AUTHORS COPYING ChangeLog \
	INSTALL NEWS README THANKS TODO build-aux/config.guess \
	build-aux/config.sub build-aux/install-sh build-aux/ltmain.sh \
	build-aux/mdate-sh build-aux/missing build-aux/texinfo.tex \
	config.guess config.sub
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
      && rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
am__post_remove_distdir = $(am__remove_distdir)
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz
GZIP_ENV = --best
DIST_TARGETS = dist-xz dist-gzip
# Exists only to be overridden by the user if desired.
AM_DISTCHECK_DVI_TARGET = dvi
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EMACS = @EMACS@
EMACSLOADPATH = @EMACSLOADPATH@
ETAGS = @ETAGS@
EXPR = @EXPR@
GREP = @GREP@
HELP2MAN = @HELP2MAN@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
M4 = @M4@
M4_DEBUGFILE = @M4_DEBUGFILE@
M4_GNU = @M4_GNU@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PERL_FLOCK = @PERL_FLOCK@
RELEASE_YEAR = @RELEASE_YEAR@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SHELL_N = @SHELL_N@
STRIP = @STRIP@
TEST_EMACS = @TEST_EMACS@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_cv_dir_trailing_space = @ac_cv_dir_trailing_space@
ac_cv_unsupported_fs_chars = @ac_cv_unsupported_fs_chars@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
lispdir = @lispdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
ACLOCAL_AMFLAGS = -I m4
ETAGS_ARGS = $(ETAGS_PERL) $(ETAGS_FOR_AUTOCONF)

# Files that should be removed, but which Automake does not know.
MOSTLYCLEANFILES = $(bin_SCRIPTS) bin/*.tmp $(dist_man_MANS:=.t) \
	$(dist_man_MANS:=a.t)

# Files from texi2dvi that should be removed, but which Automake does
# not know.

# All the files below depend on Makefile so that they are rebuilt
# when the prefix, etc. changes. Unfortunately, suffix rules
# cannot have additional dependencies, so we have to use explicit rules.

# TODO: This is required to work around a limitation in older
#	Automake.  Remove once we can assume Automake 1.13 or later.

# The hairy heredoc is more robust than using echo.
CLEANFILES = autoconf.ACs autoconf.cvs autoconf.MSs autoconf.prs \
	autoconf.ATs autoconf.evs autoconf.fns autoconf.ovs \
	autoconf.ca autoconf.CA autoconf.cas autoconf.CAs autoconf.tmp \
	lib/autom4te.cfg autoconf-mode.elc autotest-mode.elc \
	$(nodist_autoconflib_DATA) lib/autoscan/autoscan.list \
	$(nodist_m4sugarlib_DATA) $(nodist_pkgdata_DATA) \
	$(nodist_autotestlib_DATA) tests/package.m4 tests/wrapper.in \
	$(wrappers) $(TESTSUITE_GENERATED_AT) tests/mktests.tmp \
	tests/mktests.stamp expr
DISTCLEANFILES = tests/atconfig tests/atlocal $(TESTSUITE)
MAINTAINERCLEANFILES = $(am__append_1) $(dist_man_MANS) \
	$(TESTSUITE_GENERATED_AT)
SUFFIXES = .m4 .m4f .w .1

# We don't actually distribute the built testsuite or package.m4, since one
# only needs m4 to build them, and m4 is required to install Autoconf.
# But if you are borrowing from this file for setting up autotest in your
# project, remember to distribute both testsuite and package.m4.
EXTRA_DIST = ChangeLog.0 ChangeLog.1 ChangeLog.2 ChangeLog.3 BUGS \
	COPYINGv3 COPYING.EXCEPTION GNUmakefile maint.mk cfg.mk \
	build-aux/gendocs.sh build-aux/git-version-gen \
	build-aux/announce-gen build-aux/gnupload \
	build-aux/gitlog-to-changelog build-aux/help-extract.pl \
	.prev-version .version bin/autoconf.in bin/autoheader.in \
	bin/autom4te.in bin/autoreconf.in bin/autoscan.in \
	bin/autoupdate.in bin/ifnames.in doc/gendocs_template \
	lib/autom4te.in lib/autoscan/autoscan.pre \
	$(dist_man_MANS:.1=.w) $(dist_man_MANS:.1=.x) man/common.x \
	tests/local.at tests/mktests.pl tests/atlocal.in \
	tests/wrapper.as tests/statesave.m4 $(TESTSUITE_HAND_AT) \
	$(TESTSUITE_EXTRA)
edit = sed \
	-e 's|@SHELL[@]|$(SHELL)|g' \
	-e 's|@PERL[@]|$(PERL)|g' \
	-e 's|@PERL_FLOCK[@]|$(PERL_FLOCK)|g' \
	-e 's|@bindir[@]|$(bindir)|g' \
	-e 's|@pkgdatadir[@]|$(pkgdatadir)|g' \
	-e 's|@prefix[@]|$(prefix)|g' \
	-e 's|@autoconf-name[@]|'`echo autoconf | sed '$(transform)'`'|g' \
	-e 's|@autoheader-name[@]|'`echo autoheader | sed '$(transform)'`'|g' \
	-e 's|@autom4te-name[@]|'`echo autom4te | sed '$(transform)'`'|g' \
	-e 's|@M4[@]|$(M4)|g' \
	-e 's|@M4_DEBUGFILE[@]|$(M4_DEBUGFILE)|g' \
	-e 's|@M4_GNU[@]|$(M4_GNU)|g' \
	-e 's|@AWK[@]|$(AWK)|g' \
	-e 's|@RELEASE_YEAR[@]|$(RELEASE_YEAR)|g' \
	-e 's|@VERSION[@]|$(VERSION)|g' \
	-e 's|@PACKAGE_NAME[@]|$(PACKAGE_NAME)|g' \
	-e 's|@configure_input[@]|Generated from $@.in; do not edit by hand.|g'

AUTOM4TE_CFG = lib/autom4te.cfg

# Do not use AUTOM4TE here, since maint.mk (my-distcheck)
# checks if we are independent of Autoconf by defining AUTOM4TE (and
# others) to 'false'.  Autoconf provides autom4te, so that doesn't
# apply to us.
MY_AUTOM4TE = \
	autom4te_perllibdir='$(top_srcdir)'/lib					\
	AUTOM4TE_CFG='$(AUTOM4TE_CFG)'         $(top_build_prefix)bin/autom4te	\
		-B '$(top_build_prefix)'lib -B '$(top_srcdir)'/lib        # keep ' '


# Factor the dependencies between all the frozen files.
# Some day we should explain to Automake how to use autom4te to compute
# the dependencies...
src_libdir = $(top_srcdir)/lib
build_libdir = $(top_build_prefix)lib
m4f_dependencies = $(top_build_prefix)bin/autom4te $(AUTOM4TE_CFG)
m4sugar_m4f_dependencies = \
	$(m4f_dependencies)			\
	$(src_libdir)/m4sugar/m4sugar.m4	\
	$(build_libdir)/version.m4

m4sh_m4f_dependencies = \
	$(m4sugar_m4f_dependencies)		\
	$(src_libdir)/m4sugar/m4sh.m4

autotest_m4f_dependencies = \
	$(m4sh_m4f_dependencies)		\
	$(src_libdir)/autotest/autotest.m4	\
	$(src_libdir)/autotest/general.m4	\
	$(src_libdir)/autotest/specific.m4

autoconf_m4f_dependencies = \
	$(m4sh_m4f_dependencies)		\
	$(src_libdir)/autoconf/autoscan.m4	\
	$(src_libdir)/autoconf/general.m4	\
	$(src_libdir)/autoconf/autoheader.m4	\
	$(src_libdir)/autoconf/autoupdate.m4	\
	$(src_libdir)/autoconf/autotest.m4	\
	$(src_libdir)/autoconf/status.m4	\
	$(src_libdir)/autoconf/oldnames.m4	\
	$(src_libdir)/autoconf/specific.m4	\
	$(src_libdir)/autoconf/lang.m4		\
	$(src_libdir)/autoconf/c.m4		\
	$(src_libdir)/autoconf/fortran.m4	\
	$(src_libdir)/autoconf/erlang.m4	\
	$(src_libdir)/autoconf/go.m4		\
	$(src_libdir)/autoconf/functions.m4	\
	$(src_libdir)/autoconf/headers.m4	\
	$(src_libdir)/autoconf/types.m4		\
	$(src_libdir)/autoconf/libs.m4		\
	$(src_libdir)/autoconf/programs.m4	\
	$(src_libdir)/autoconf/autoconf.m4

ETAGS_FOR_M4 = \
  --lang=none \
  --regex='/\(m4_define\|define\)(\[\([^]]*\)\]/\2/'

ETAGS_FOR_M4SUGAR = \
  $(ETAGS_FOR_M4) \
  --regex='/m4_defun(\[\([^]]*\)\]/\1/'

ETAGS_FOR_AUTOCONF = \
  $(ETAGS_FOR_M4SUGAR) \
  --regex='/\(A[CU]_DEFUN\|AU_ALIAS\)(\[\([^]]*\)\]/\2/' \
  --regex='/AN_\(FUNCTION\|HEADER\|IDENTIFIER\|LIBRARY\|MAKEVAR\|PROGRAM\)(\[\([^]]*\)\]/\2/'

custom_MAKEINFOFLAGS = --no-headers --no-validate --no-split
@MAKE_CASE_SENSITIVE_TRUE@pkgdata_DATA = $(srcdir)/INSTALL

# Don't leave blank line at end of file.
@MAKE_CASE_SENSITIVE_TRUE@OMIT_TRAILING_EMPTY_LINES = '/^$$/H; /^$$/d; x; s/\n//p; s/\n*//; x'

# Generate the ChangeLog from git history.
gen_start_date = 2012-01-15 18:00:00 UTC

# Version string management.  There are two files to be aware of:
# .tarball-version - present only in a distribution tarball, and not in
#   a checked-out repository.  Created with contents that were learned at
#   the last time autoconf was run, and used by git-version-gen.  Must not
#   be present in either $(srcdir) or $(builddir) for git-version-gen to
#   give accurate answers during normal development with a checked out tree,
#   but must be present in a tarball when there is no version control system.
#   Therefore, it cannot be used in any dependencies.  GNUmakefile has
#   hooks to force a reconfigure at distribution time to get the value
#   correct, without penalizing normal development with extra reconfigures.
# .version - present in a checked-out repository and in a distribution
#   tarball.  At least as current as the most recent .tarball-version
#   creation.  Usable in dependencies, particularly for files that don't
#   want to depend on config.h but do want to track version changes.
BUILT_SOURCES = $(top_srcdir)/.version
bin_SCRIPTS = \
  bin/autoconf \
  bin/autoheader \
  bin/autom4te \
  bin/autoreconf \
  bin/autoscan \
  bin/autoupdate \
  bin/ifnames

TAGS_DEPENDENCIES = $(EXTRA_DIST)
letters = abcdefghijklmnopqrstuvwxyz
LETTERS = ABCDEFGHIJKLMNOPQRSTUVWXYZ
DIGITS = 0123456789
WORD_REGEXP = [$(LETTERS)$(letters)_][$(LETTERS)$(letters)$(DIGITS)_]*
ETAGS_PERL = --lang=perl \
  bin/autoconf.in \
  bin/autoheader.in \
  bin/autom4te.in \
  bin/autoreconf.in \
  bin/autoscan.in \
  bin/autoupdate.in \
  bin/ifnames.in

AM_MAKEINFOFLAGS = --no-split
TEXI2HTML_FLAGS = -split_chapter
TEXINFO_TEX = build-aux/texinfo.tex
info_TEXINFOS = doc/autoconf.texi doc/standards.texi
doc_autoconf_TEXINFOS = doc/fdl.texi doc/install.texi
doc_standards_TEXINFOS = doc/fdl.texi doc/gnu-oids.texi doc/make-stds.texi
TAGS_FILES = $(dist_perllib_DATA) $(dist_autoconflib_DATA) \
	$(dist_m4sugarlib_DATA) $(dist_autotestlib_DATA)
forbidden_patterns = -e '^_*EOF' -e ' cmp '
forbidden_patterns_files = $(dist_autoconflib_DATA) \
	$(dist_m4sugarlib_DATA) $(dist_autotestlib_DATA)
perllibdir = $(pkgdatadir)/Autom4te
dist_perllib_DATA = \
  lib/Autom4te/C4che.pm \
  lib/Autom4te/ChannelDefs.pm \
  lib/Autom4te/Channels.pm \
  lib/Autom4te/Config.pm \
  lib/Autom4te/Configure_ac.pm \
  lib/Autom4te/FileUtils.pm \
  lib/Autom4te/General.pm \
  lib/Autom4te/Getopt.pm \
  lib/Autom4te/Request.pm \
  lib/Autom4te/XFile.pm

# Note: ETAGS_ARGS should have already been extended to handle perl files.
nodist_pkgdata_DATA = lib/autom4te.cfg lib/version.m4
dist_lisp_LISP = lib/emacs/autoconf-mode.el lib/emacs/autotest-mode.el
autoconflibdir = $(pkgdatadir)/autoconf
dist_autoconflib_DATA = \
  lib/autoconf/autoconf.m4 \
  lib/autoconf/general.m4 \
  lib/autoconf/status.m4 \
  lib/autoconf/oldnames.m4 \
  lib/autoconf/specific.m4 \
  lib/autoconf/autoheader.m4 \
  lib/autoconf/autoupdate.m4 \
  lib/autoconf/autotest.m4 \
  lib/autoconf/autoscan.m4 \
  lib/autoconf/lang.m4 \
  lib/autoconf/c.m4 \
  lib/autoconf/erlang.m4 \
  lib/autoconf/fortran.m4 \
  lib/autoconf/functions.m4 \
  lib/autoconf/go.m4 \
  lib/autoconf/headers.m4 \
  lib/autoconf/types.m4 \
  lib/autoconf/libs.m4 \
  lib/autoconf/programs.m4 \
  lib/autoconf/trailer.m4

nodist_autoconflib_DATA = lib/autoconf/autoconf.m4f
autoscanlibdir = $(pkgdatadir)/autoscan
nodist_autoscanlib_DATA = lib/autoscan/autoscan.list
m4sugarlibdir = $(pkgdatadir)/m4sugar
dist_m4sugarlib_DATA = \
  lib/m4sugar/m4sugar.m4 \
  lib/m4sugar/foreach.m4 \
  lib/m4sugar/m4sh.m4

nodist_m4sugarlib_DATA = \
  lib/m4sugar/m4sugar.m4f \
  lib/m4sugar/m4sh.m4f

autotestlibdir = $(pkgdatadir)/autotest
dist_autotestlib_DATA = \
  lib/autotest/autotest.m4 \
  lib/autotest/general.m4 \
  lib/autotest/specific.m4

nodist_autotestlib_DATA = lib/autotest/autotest.m4f

# These are declared as _DATA so that they are not subject to
# --program-transform-name; $(pkgdatadir) is sufficient to keep
# multiple installations separate, and autoreconf looks for them by
# their unadorned names.  However, autoreconf copies the executable
# bit when it copies these files into a source tree, and _DATA items
# are installed as not-executable, so we have to make them executable
# in a hook rule.
AUXSCRIPTS = \
  build-aux/config.guess \
  build-aux/config.sub \
  build-aux/install-sh

buildauxdir = $(pkgdatadir)/build-aux
dist_buildaux_DATA = \
  $(AUXSCRIPTS)

dist_man_MANS = \
  man/autoconf.1 \
  man/autoheader.1 \
  man/autom4te.1 \
  man/autoreconf.1 \
  man/autoscan.1 \
  man/autoupdate.1 \
  man/ifnames.1


# Each manpage depends on:
# - its .w and .x files and its source script in bin/
# - common.x for the SEE ALSO list
# - lib/Autom4te/ChannelDefs.pm which contains additional --help text
#   (not included in _all_ the manpages, but it's easier to have them
#   all depend on it)
# - .version and configure.ac for version information
#
# We ship the manpages in tarball releases so people can build from
# them without having help2man installed.  For this to work correctly,
# the manpages cannot have declared dependencies on any file that is
# not also shipped in the tarball.  To avoid concurrency bugs, those
# files plus the Makefile must in fact be sufficient to generate the
# manpages.  See the automake manual, section 'Errors with distclean',
# for further discussion.
binsrcdir = $(top_srcdir)/bin
channeldefs_pm = lib/Autom4te/ChannelDefs.pm
man_common_dep = $(top_srcdir)/man/common.x \
		 $(top_srcdir)/$(channeldefs_pm) \
		 $(top_srcdir)/.version \
		 $(top_srcdir)/configure.ac


# To generate the manpages, we use help2man, but we don't have it run
# the built script that corresponds to the manpage.  Instead it runs
# the .w file listed above, which is a wrapper around
# build-aux/help-extract.pl, which parses the *source* of the script
# and extracts the help and version text.  This means that the built
# script doesn't need to exist to create the manpage.  If it did,
# we would have a concurrency bug, since we can't declare a dependency
# on the built script, as discussed above.
# We use a suffix rule describing the manpage as built from its .w file
# so that we can use $(<F) to name the executable to be run, which avoids
# an extra subshell and sed invocation.
remove_time_stamp = 's/^\(\.TH[^"]*"[^"]*"[^"]*\)"[^"]*"/\1/'

# Running the uninstalled scripts.  Build them upon 'all', for the manpages.
noinst_SCRIPTS = $(wrappers)
wrappers = \
  tests/autoconf \
  tests/autoheader \
  tests/autom4te \
  tests/autoreconf \
  tests/autoscan \
  tests/autoupdate \
  tests/ifnames

edit_wrapper = sed \
	-e 's|@wrap_program[@]|$(@F)|g' \
	-e 's|@abs_top_srcdir[@]|$(abs_top_srcdir)|g' \
	-e 's|@abs_top_builddir[@]|$(abs_top_builddir)|g' \
	-e "s|@configure_input[@]|Generated from $$input.|g"

TESTSUITE_GENERATED_AT = \
  tests/aclang.at \
  tests/acc.at \
  tests/acerlang.at \
  tests/acfortran.at \
  tests/acgo.at \
  tests/acgeneral.at \
  tests/acstatus.at \
  tests/acautoheader.at \
  tests/acautoupdate.at \
  tests/acspecific.at \
  tests/acfunctions.at \
  tests/acheaders.at \
  tests/actypes.at \
  tests/aclibs.at \
  tests/acprograms.at

TESTSUITE_HAND_AT = \
  tests/suite.at \
  tests/m4sugar.at \
  tests/m4sh.at \
  tests/autotest.at \
  tests/base.at \
  tests/tools.at \
  tests/torture.at \
  tests/compile.at \
  tests/c.at \
  tests/erlang.at \
  tests/fortran.at \
  tests/go.at \
  tests/semantics.at \
  tests/autoscan.at \
  tests/foreign.at

TESTSUITE_EXTRA = \
  tests/data/ax_prog_cc_for_build_v18.m4 \
  tests/data/ax_prog_cxx_for_build_v3.m4 \
  tests/data/gnulib_std_gnu11_2020_08_17.m4

TESTSUITE_AT = $(TESTSUITE_GENERATED_AT) $(TESTSUITE_HAND_AT)
TESTSUITE = tests/testsuite

# Run the non installed autom4te.
# Don't use AUTOM4TE since 'make alpha' makes it unavailable although
# we are allowed to use it (since we ship it).
AUTOTESTFLAGS = -I tests -I $(srcdir)/tests
AUTOTEST = $(MY_AUTOM4TE) --language=autotest

# Factor out invocation of the testsuite script.
run_testsuite = $(SHELL) $(TESTSUITE) -C tests MAKE=$(MAKE)

# Avoid a race condition that would make parallel "distclean" fail.
# The rule in clean-local tests for existence of $(TESTSUITE), and
# if found, attempts to run it.  But the distclean-generic rule may
# be running in parallel, and it removes $(DISTCLEANFILES) which
# includes $(TESTSUITE).  This is the Automake rule, plus our
# dependency, and we silence the warning from 'automake -Wall' by
# hiding the dependency behind a variable.
# TODO - fix this if newer automake accommodates the dependency.
distclean_generic = distclean-generic

# The files which contain macros we check for syntax.  Use $(srcdir)
# for the benefit of non-GNU make.
autoconfdir = $(srcdir)/lib/autoconf
AUTOCONF_FILES = $(autoconfdir)/general.m4 \
		 $(autoconfdir)/status.m4 \
		 $(autoconfdir)/autoheader.m4 \
		 $(autoconfdir)/autoupdate.m4 \
		 $(autoconfdir)/specific.m4 \
		 $(autoconfdir)/functions.m4 \
		 $(autoconfdir)/lang.m4 \
		 $(autoconfdir)/c.m4 \
		 $(autoconfdir)/erlang.m4 \
		 $(autoconfdir)/fortran.m4 \
		 $(autoconfdir)/go.m4 \
		 $(autoconfdir)/headers.m4 \
		 $(autoconfdir)/libs.m4 \
		 $(autoconfdir)/types.m4 \
		 $(autoconfdir)/programs.m4


# Perl coverage statistics.
PERL_COVERAGE_DB = `pwd`/cover_db
PERL_COVERAGE_FLAGS = -MDevel::Cover=-db,$(PERL_COVERAGE_DB),-silent,on,-summary,off
PERL_COVER = cover
all: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) all-am

.SUFFIXES:
.SUFFIXES: .m4 .m4f .w .1 .dvi .el .elc .ps
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(srcdir)/lib/freeze.mk $(srcdir)/bin/local.mk $(srcdir)/doc/local.mk $(srcdir)/lib/local.mk $(srcdir)/man/local.mk $(srcdir)/tests/local.mk $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
	esac;
$(srcdir)/lib/freeze.mk $(srcdir)/bin/local.mk $(srcdir)/doc/local.mk $(srcdir)/lib/local.mk $(srcdir)/man/local.mk $(srcdir)/tests/local.mk $(am__empty):

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure:  $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
tests/atlocal: $(top_builddir)/config.status $(top_srcdir)/tests/atlocal.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
lib/version.m4: $(top_builddir)/config.status $(top_srcdir)/lib/version.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
install-binSCRIPTS: $(bin_SCRIPTS)
	@$(NORMAL_INSTALL)
	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n' \
	    -e 'h;s|.*|.|' \
	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
	      if (++n[d] == $(am__install_max)) { \
		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
	    else { print "f", d "/" $$4, $$1 } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	     test -z "$$files" || { \
	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
	     } \
	; done

uninstall-binSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
	files=`for p in $$list; do echo "$$p"; done | \
	       sed -e 's,.*/,,;$(transform)'`; \
	dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)

installcheck-binSCRIPTS: $(bin_SCRIPTS)
	bad=0; pid=$$$$; list="$(bin_SCRIPTS)"; for p in $$list; do \
	  case ' $(AM_INSTALLCHECK_STD_OPTIONS_EXEMPT) ' in \
	   *" $$p "* | *" $(srcdir)/$$p "*) continue;; \
	  esac; \
	  f=`echo "$$p" | sed 's,^.*/,,;$(transform)'`; \
	  for opt in --help --version; do \
	    if "$(DESTDIR)$(bindir)/$$f" $$opt >c$${pid}_.out \
	         2>c$${pid}_.err </dev/null \
		 && test -n "`cat c$${pid}_.out`" \
		 && test -z "`cat c$${pid}_.err`"; then :; \
	    else echo "$$f does not support $$opt" 1>&2; bad=1; fi; \
	  done; \
	done; rm -f c$${pid}_.???; exit $$bad
doc/$(am__dirstamp):
	@$(MKDIR_P) doc
	@: > doc/$(am__dirstamp)

$(srcdir)/doc/autoconf.info: doc/autoconf.texi $(srcdir)/doc/version.texi $(doc_autoconf_TEXINFOS)
	$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	am__cwd=`pwd` && $(am__cd) $(srcdir) && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	cd "$$am__cwd"; \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
	 -o $@ $(srcdir)/doc/autoconf.texi; \
	then \
	  rc=0; \
	  $(am__cd) $(srcdir); \
	else \
	  rc=$$?; \
	  $(am__cd) $(srcdir) && \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

doc/autoconf.dvi: doc/autoconf.texi $(srcdir)/doc/version.texi $(doc_autoconf_TEXINFOS) doc/$(am__dirstamp)
	$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
	$(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
	`test -f 'doc/autoconf.texi' || echo '$(srcdir)/'`doc/autoconf.texi

doc/autoconf.pdf: doc/autoconf.texi $(srcdir)/doc/version.texi $(doc_autoconf_TEXINFOS) doc/$(am__dirstamp)
	$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
	$(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
	`test -f 'doc/autoconf.texi' || echo '$(srcdir)/'`doc/autoconf.texi

doc/autoconf.html: doc/autoconf.texi $(srcdir)/doc/version.texi $(doc_autoconf_TEXINFOS) doc/$(am__dirstamp)
	$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
	$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
	 -o $(@:.html=.htp) `test -f 'doc/autoconf.texi' || echo '$(srcdir)/'`doc/autoconf.texi; \
	then \
	  rm -rf $@ && mv $(@:.html=.htp) $@; \
	else \
	  rm -rf $(@:.html=.htp); exit 1; \
	fi
$(srcdir)/doc/version.texi:  $(srcdir)/doc/stamp-vti
$(srcdir)/doc/stamp-vti: doc/autoconf.texi $(top_srcdir)/configure
	@test -f doc/$(am__dirstamp) || $(MAKE) $(AM_MAKEFLAGS) doc/$(am__dirstamp)
	@(dir=.; test -f ./doc/autoconf.texi || dir=$(srcdir); \
	set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/doc/autoconf.texi`; \
	echo "@set UPDATED $$1 $$2 $$3"; \
	echo "@set UPDATED-MONTH $$2 $$3"; \
	echo "@set EDITION $(VERSION)"; \
	echo "@set VERSION $(VERSION)") > vti.tmp$$$$ && \
	(cmp -s vti.tmp$$$$ $(srcdir)/doc/version.texi \
	  || (echo "Updating $(srcdir)/doc/version.texi" && \
	      cp vti.tmp$$$$ $(srcdir)/doc/version.texi.tmp$$$$ && \
	      mv $(srcdir)/doc/version.texi.tmp$$$$ $(srcdir)/doc/version.texi)) && \
	rm -f vti.tmp$$$$ $(srcdir)/doc/version.texi.$$$$
	@cp $(srcdir)/doc/version.texi $@

mostlyclean-vti:
	-rm -f vti.tmp* $(srcdir)/doc/version.texi.tmp*

maintainer-clean-vti:
	-rm -f $(srcdir)/doc/stamp-vti $(srcdir)/doc/version.texi

$(srcdir)/doc/standards.info: doc/standards.texi $(doc_standards_TEXINFOS)
	$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	am__cwd=`pwd` && $(am__cd) $(srcdir) && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	cd "$$am__cwd"; \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
	 -o $@ $(srcdir)/doc/standards.texi; \
	then \
	  rc=0; \
	  $(am__cd) $(srcdir); \
	else \
	  rc=$$?; \
	  $(am__cd) $(srcdir) && \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

doc/standards.dvi: doc/standards.texi $(doc_standards_TEXINFOS) doc/$(am__dirstamp)
	$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
	$(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
	`test -f 'doc/standards.texi' || echo '$(srcdir)/'`doc/standards.texi

doc/standards.pdf: doc/standards.texi $(doc_standards_TEXINFOS) doc/$(am__dirstamp)
	$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
	$(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
	`test -f 'doc/standards.texi' || echo '$(srcdir)/'`doc/standards.texi

doc/standards.html: doc/standards.texi $(doc_standards_TEXINFOS) doc/$(am__dirstamp)
	$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
	$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
	 -o $(@:.html=.htp) `test -f 'doc/standards.texi' || echo '$(srcdir)/'`doc/standards.texi; \
	then \
	  rm -rf $@ && mv $(@:.html=.htp) $@; \
	else \
	  rm -rf $(@:.html=.htp); exit 1; \
	fi
.dvi.ps:
	$(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	$(DVIPS) $(AM_V_texinfo) -o $@ $<

uninstall-dvi-am:
	@$(NORMAL_UNINSTALL)
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
	done

uninstall-html-am:
	@$(NORMAL_UNINSTALL)
	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
	done

uninstall-info-am:
	@$(PRE_UNINSTALL)
	@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

uninstall-pdf-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
	done

uninstall-ps-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
	done

dist-info: $(INFO_DEPS)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  case $$base in \
	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
	    if test -f $$file; then \
	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
	      test -f "$(distdir)/$$relfile" || \
		cp -p $$file "$(distdir)/$$relfile"; \
	    else :; fi; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -rf doc/autoconf.t2d doc/autoconf.t2p doc/standards.t2d \
	  doc/standards.t2p

clean-aminfo:
	-test -z "doc/autoconf.dvi doc/autoconf.pdf doc/autoconf.ps doc/autoconf.html \
	  doc/standards.dvi doc/standards.pdf doc/standards.ps \
	  doc/standards.html" \
	|| rm -rf doc/autoconf.dvi doc/autoconf.pdf doc/autoconf.ps doc/autoconf.html \
	  doc/standards.dvi doc/standards.pdf doc/standards.ps \
	  doc/standards.html

maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done

.el.elc:
	if test '$(EMACS)' != no; then \
	  am__dir=. am__subdir_includes=''; \
	  case $@ in */*) \
	    am__dir=`echo '$@' | sed 's,/[^/]*$$,,'`; \
	    am__subdir_includes="-L $$am__dir -L $(srcdir)/$$am__dir"; \
	  esac; \
	  test -d "$$am__dir" || $(MKDIR_P) "$$am__dir" || exit 1; \
	  $(EMACS) --batch \
	    $(AM_ELCFLAGS) $(ELCFLAGS) \
	    $$am__subdir_includes -L $(builddir) -L $(srcdir) \
	    --eval '$(am__emacs_byte_compile_setup)' \
	    -f batch-byte-compile '$<'; \
	else :; fi

install-dist_lispLISP: $(dist_lisp_LISP) $(ELCFILES)
	@$(NORMAL_INSTALL)
	@if test "$(EMACS)" != no && test -n "$(lispdir)"; then \
	  list='$(dist_lisp_LISP)'; \
	  if test -n "$$list"; then \
	    echo " $(MKDIR_P) '$(DESTDIR)$(lispdir)'"; \
	    $(MKDIR_P) "$(DESTDIR)$(lispdir)" || exit 1; \
	  fi; \
	  for p in $$list; do \
	    if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	    $(am__strip_dir) \
	    echo " $(dist_lispLISP_INSTALL) '$$d$$p' '$(DESTDIR)$(lispdir)/$$f'"; \
	    $(dist_lispLISP_INSTALL) "$$d$$p" "$(DESTDIR)$(lispdir)/$$f" || exit $$?; \
	    if test -f $${p}c; then \
	      echo " $(dist_lispLISP_INSTALL) '$${p}c' '$(DESTDIR)$(lispdir)/$${f}c'"; \
	      $(dist_lispLISP_INSTALL) "$${p}c" "$(DESTDIR)$(lispdir)/$${f}c" || exit $$?; \
	    else : ; fi; \
	  done; \
	else : ; fi

uninstall-dist_lispLISP:
	@$(NORMAL_UNINSTALL)
	@test "$(EMACS)" != no && test -n "$(lispdir)" || exit 0; \
	list='$(dist_lisp_LISP)'; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	files="$$files "`echo "$$files" | sed 's|$$|c|'`; \
	dir='$(DESTDIR)$(lispdir)'; $(am__uninstall_files_from_dir)

clean-lisp:
	-rm -f $(ELCFILES)
install-man1: $(dist_man_MANS)
	@$(NORMAL_INSTALL)
	@list1=''; \
	list2='$(dist_man_MANS)'; \
	test -n "$(man1dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.1[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
install-dist_autoconflibDATA: $(dist_autoconflib_DATA)
	@$(NORMAL_INSTALL)
	@list='$(dist_autoconflib_DATA)'; test -n "$(autoconflibdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(autoconflibdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(autoconflibdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(autoconflibdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(autoconflibdir)" || exit $$?; \
	done

uninstall-dist_autoconflibDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_autoconflib_DATA)'; test -n "$(autoconflibdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(autoconflibdir)'; $(am__uninstall_files_from_dir)
install-dist_autotestlibDATA: $(dist_autotestlib_DATA)
	@$(NORMAL_INSTALL)
	@list='$(dist_autotestlib_DATA)'; test -n "$(autotestlibdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(autotestlibdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(autotestlibdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(autotestlibdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(autotestlibdir)" || exit $$?; \
	done

uninstall-dist_autotestlibDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_autotestlib_DATA)'; test -n "$(autotestlibdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(autotestlibdir)'; $(am__uninstall_files_from_dir)
install-dist_buildauxDATA: $(dist_buildaux_DATA)
	@$(NORMAL_INSTALL)
	@list='$(dist_buildaux_DATA)'; test -n "$(buildauxdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(buildauxdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(buildauxdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(buildauxdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(buildauxdir)" || exit $$?; \
	done

uninstall-dist_buildauxDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_buildaux_DATA)'; test -n "$(buildauxdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(buildauxdir)'; $(am__uninstall_files_from_dir)
install-dist_m4sugarlibDATA: $(dist_m4sugarlib_DATA)
	@$(NORMAL_INSTALL)
	@list='$(dist_m4sugarlib_DATA)'; test -n "$(m4sugarlibdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(m4sugarlibdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(m4sugarlibdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(m4sugarlibdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(m4sugarlibdir)" || exit $$?; \
	done

uninstall-dist_m4sugarlibDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_m4sugarlib_DATA)'; test -n "$(m4sugarlibdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(m4sugarlibdir)'; $(am__uninstall_files_from_dir)
install-dist_perllibDATA: $(dist_perllib_DATA)
	@$(NORMAL_INSTALL)
	@list='$(dist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(perllibdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(perllibdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(perllibdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(perllibdir)" || exit $$?; \
	done

uninstall-dist_perllibDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(perllibdir)'; $(am__uninstall_files_from_dir)
install-nodist_autoconflibDATA: $(nodist_autoconflib_DATA)
	@$(NORMAL_INSTALL)
	@list='$(nodist_autoconflib_DATA)'; test -n "$(autoconflibdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(autoconflibdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(autoconflibdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(autoconflibdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(autoconflibdir)" || exit $$?; \
	done

uninstall-nodist_autoconflibDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_autoconflib_DATA)'; test -n "$(autoconflibdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(autoconflibdir)'; $(am__uninstall_files_from_dir)
install-nodist_autoscanlibDATA: $(nodist_autoscanlib_DATA)
	@$(NORMAL_INSTALL)
	@list='$(nodist_autoscanlib_DATA)'; test -n "$(autoscanlibdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(autoscanlibdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(autoscanlibdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(autoscanlibdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(autoscanlibdir)" || exit $$?; \
	done

uninstall-nodist_autoscanlibDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_autoscanlib_DATA)'; test -n "$(autoscanlibdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(autoscanlibdir)'; $(am__uninstall_files_from_dir)
install-nodist_autotestlibDATA: $(nodist_autotestlib_DATA)
	@$(NORMAL_INSTALL)
	@list='$(nodist_autotestlib_DATA)'; test -n "$(autotestlibdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(autotestlibdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(autotestlibdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(autotestlibdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(autotestlibdir)" || exit $$?; \
	done

uninstall-nodist_autotestlibDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_autotestlib_DATA)'; test -n "$(autotestlibdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(autotestlibdir)'; $(am__uninstall_files_from_dir)
install-nodist_m4sugarlibDATA: $(nodist_m4sugarlib_DATA)
	@$(NORMAL_INSTALL)
	@list='$(nodist_m4sugarlib_DATA)'; test -n "$(m4sugarlibdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(m4sugarlibdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(m4sugarlibdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(m4sugarlibdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(m4sugarlibdir)" || exit $$?; \
	done

uninstall-nodist_m4sugarlibDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_m4sugarlib_DATA)'; test -n "$(m4sugarlibdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(m4sugarlibdir)'; $(am__uninstall_files_from_dir)
install-nodist_pkgdataDATA: $(nodist_pkgdata_DATA)
	@$(NORMAL_INSTALL)
	@list='$(nodist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \
	done

uninstall-nodist_pkgdataDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nodist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir)
install-pkgdataDATA: $(pkgdata_DATA)
	@$(NORMAL_INSTALL)
	@list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \
	done

uninstall-pkgdataDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir)

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-am
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-am

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
	test ! -s cscope.files \
	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
	-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-am

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) distdir-am

distdir-am: $(DISTFILES)
	$(am__remove_distdir)
	test -d "$(distdir)" || mkdir "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-info dist-hook
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
	$(am__post_remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__post_remove_distdir)

dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	$(am__post_remove_distdir)
dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__post_remove_distdir)

dist-zstd: distdir
	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
	$(am__post_remove_distdir)

dist-tarZ: distdir
	@echo WARNING: "Support for distribution archives compressed with" \
		       "legacy program 'compress' is deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__post_remove_distdir)

dist-shar: distdir
	@echo WARNING: "Support for shar distribution archives is" \
	               "deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
	$(am__post_remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__post_remove_distdir)

dist dist-all:
	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
	$(am__post_remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	*.tar.zst*) \
	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
	esac
	chmod -R a-w $(distdir)
	chmod u+w $(distdir)
	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build/sub \
	  && ../../configure \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	    --srcdir=../.. --prefix="$$dc_install_base" \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__post_remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) check-local
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-am
all-am: Makefile $(INFO_DEPS) $(SCRIPTS) $(LISP) $(ELCFILES) $(MANS) \
		$(DATA)
installdirs:
	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(lispdir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(autoconflibdir)" "$(DESTDIR)$(autotestlibdir)" "$(DESTDIR)$(buildauxdir)" "$(DESTDIR)$(m4sugarlibdir)" "$(DESTDIR)$(perllibdir)" "$(DESTDIR)$(autoconflibdir)" "$(DESTDIR)$(autoscanlibdir)" "$(DESTDIR)$(autotestlibdir)" "$(DESTDIR)$(m4sugarlibdir)" "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(pkgdatadir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-am
install-exec: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:
	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-rm -f doc/$(am__dirstamp)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-am

clean-am: clean-aminfo clean-generic clean-lisp clean-local \
	mostlyclean-am

distclean: distclean-am
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-local \
	distclean-tags

dvi: dvi-am

dvi-am: $(DVIS)

html: html-am

html-am: $(HTMLS)

info: info-am

info-am: $(INFO_DEPS)

install-data-am: install-dist_autoconflibDATA \
	install-dist_autotestlibDATA install-dist_buildauxDATA \
	install-dist_lispLISP install-dist_m4sugarlibDATA \
	install-dist_perllibDATA install-info-am install-man \
	install-nodist_autoconflibDATA install-nodist_autoscanlibDATA \
	install-nodist_autotestlibDATA install-nodist_m4sugarlibDATA \
	install-nodist_pkgdataDATA install-pkgdataDATA
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-am

install-dvi-am: $(DVIS)
	@$(NORMAL_INSTALL)
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
	done
install-exec-am: install-binSCRIPTS

install-html: install-html-am

install-html-am: $(HTMLS)
	@$(NORMAL_INSTALL)
	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  $(am__strip_dir) \
	  d2=$$d$$p; \
	  if test -d "$$d2"; then \
	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
	    echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
	  else \
	    list2="$$list2 $$d2"; \
	  fi; \
	done; \
	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
	done; }
install-info: install-info-am

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
	fi; \
	for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
	               $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      echo "$$ifile"; \
	    else : ; fi; \
	  done; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
	@$(POST_INSTALL)
	@if $(am__can_run_installinfo); then \
	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi
install-man: install-man1

install-pdf: install-pdf-am

install-pdf-am: $(PDFS)
	@$(NORMAL_INSTALL)
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-am

install-ps-am: $(PSS)
	@$(NORMAL_INSTALL)
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am: installcheck-binSCRIPTS installcheck-local

maintainer-clean: maintainer-clean-am
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-vti

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti

pdf: pdf-am

pdf-am: $(PDFS)

ps: ps-am

ps-am: $(PSS)

uninstall-am: uninstall-binSCRIPTS uninstall-dist_autoconflibDATA \
	uninstall-dist_autotestlibDATA uninstall-dist_buildauxDATA \
	uninstall-dist_lispLISP uninstall-dist_m4sugarlibDATA \
	uninstall-dist_perllibDATA uninstall-dvi-am uninstall-html-am \
	uninstall-info-am uninstall-man \
	uninstall-nodist_autoconflibDATA \
	uninstall-nodist_autoscanlibDATA \
	uninstall-nodist_autotestlibDATA \
	uninstall-nodist_m4sugarlibDATA uninstall-nodist_pkgdataDATA \
	uninstall-pdf-am uninstall-pkgdataDATA uninstall-ps-am

uninstall-man: uninstall-man1

.MAKE: all check check-am install install-am install-data-am \
	install-exec install-strip

.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am \
	check-local clean clean-aminfo clean-cscope clean-generic \
	clean-lisp clean-local cscope cscopelist-am ctags ctags-am \
	dist dist-all dist-bzip2 dist-gzip dist-hook dist-info \
	dist-lzip dist-shar dist-tarZ dist-xz dist-zip dist-zstd \
	distcheck distclean distclean-generic distclean-local \
	distclean-tags distcleancheck distdir distuninstallcheck dvi \
	dvi-am html html-am info info-am install install-am \
	install-binSCRIPTS install-data install-data-am \
	install-data-hook install-dist_autoconflibDATA \
	install-dist_autotestlibDATA install-dist_buildauxDATA \
	install-dist_lispLISP install-dist_m4sugarlibDATA \
	install-dist_perllibDATA install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-man1 \
	install-nodist_autoconflibDATA install-nodist_autoscanlibDATA \
	install-nodist_autotestlibDATA install-nodist_m4sugarlibDATA \
	install-nodist_pkgdataDATA install-pdf install-pdf-am \
	install-pkgdataDATA install-ps install-ps-am install-strip \
	installcheck installcheck-am installcheck-binSCRIPTS \
	installcheck-local installdirs maintainer-clean \
	maintainer-clean-aminfo maintainer-clean-generic \
	maintainer-clean-vti mostlyclean mostlyclean-aminfo \
	mostlyclean-generic mostlyclean-vti pdf pdf-am ps ps-am tags \
	tags-am uninstall uninstall-am uninstall-binSCRIPTS \
	uninstall-dist_autoconflibDATA uninstall-dist_autotestlibDATA \
	uninstall-dist_buildauxDATA uninstall-dist_lispLISP \
	uninstall-dist_m4sugarlibDATA uninstall-dist_perllibDATA \
	uninstall-dvi-am uninstall-html-am uninstall-info-am \
	uninstall-man uninstall-man1 uninstall-nodist_autoconflibDATA \
	uninstall-nodist_autoscanlibDATA \
	uninstall-nodist_autotestlibDATA \
	uninstall-nodist_m4sugarlibDATA uninstall-nodist_pkgdataDATA \
	uninstall-pdf-am uninstall-pkgdataDATA uninstall-ps-am

.PRECIOUS: Makefile


# When processing the file with diversion disabled, there must be no
# output but comments and empty lines.
# If freezing produces output, something went wrong: a bad 'divert',
# or an improper paren etc.
# It may happen that the output does not end with an end of line, hence
# force an end of line when reporting errors.
.m4.m4f:
	$(MKDIR_P) $(@D)
	lang=`echo '$*' | sed 's,.*/,,'` \
	  && if test $$lang = autoconf; then \
	       lang=autoconf-without-aclocal-m4; \
	     else :; fi \
	  && $(MY_AUTOM4TE) \
		--language=$$lang \
		--freeze \
		--output=$@

check-forbidden-patterns:
	@if (cd $(srcdir) && \
	    $(GREP) $(forbidden_patterns) $(forbidden_patterns_files)) \
	    >forbidden.log; then \
	  echo "ERROR: forbidden patterns were found:" >&2; \
	  sed "s|^|$*.m4: |" <forbidden.log >&2; \
	  echo >&2; \
	  exit 1; \
	else \
	  rm -f forbidden.log; \
	fi

@MAKE_CASE_SENSITIVE_TRUE@$(srcdir)/INSTALL: $(top_srcdir)/doc/install.texi
@MAKE_CASE_SENSITIVE_TRUE@	echo @firstparagraphindent insert				\
@MAKE_CASE_SENSITIVE_TRUE@	  | cat - $(top_srcdir)/doc/install.texi > tmp.texi
@MAKE_CASE_SENSITIVE_TRUE@	$(MAKEINFO) $(custom_MAKEINFOFLAGS) $(MAKEINFOFLAGS)		\
@MAKE_CASE_SENSITIVE_TRUE@	     --plaintext tmp.texi					\
@MAKE_CASE_SENSITIVE_TRUE@	  | sed -e $(OMIT_TRAILING_EMPTY_LINES)				\
@MAKE_CASE_SENSITIVE_TRUE@	     > $@-t && mv $@-t $@
@MAKE_CASE_SENSITIVE_TRUE@	rm -f tmp.texi
.PHONY: gen-ChangeLog
gen-ChangeLog:
	if test -d $(top_srcdir)/.git; then \
	  (cd $(top_srcdir) && ./build-aux/gitlog-to-changelog \
	    --since='$(gen_start_date)') > $(distdir)/cl-t \
	    && rm -f $(distdir)/ChangeLog \
	    && mv $(distdir)/cl-t $(distdir)/ChangeLog; \
	fi

# Dummy rule, to pacify automake "gnu" strictness and allow a clean
# bootstrap.  Creates a dummy ChangeLog (unless one is already present,
# as might be the case for users of vc-dwim) that will be overridden
# with a proper one at distribution time.
ChangeLog:
	@echo dummy > $@
$(top_srcdir)/.version:
	echo $(VERSION) > $@-t && mv $@-t $@

# Arrange so that .tarball-version appears only in distribution tarballs,
# never in a checked-out repository.
dist-hook: gen-ChangeLog
	echo $(VERSION) > $(distdir)/.tarball-version

# Arrange to remove the symlink to GNUmakefile in VPATH builds.
# TODO remove this once automake vs. AC_CONFIG_LINKS issue is fixed.
# Delete ChangeLog if it is the dummy created by the rule above.
# The sed construct below distinguishes between a file whose sole
# contents are "dummy", and a file whose first line is "dummy" but then
# has other stuff, without reading the whole thing.
distclean-local:
	if test x"$(VPATH)" != x ; then rm -f GNUmakefile ; fi
	if test "x`sed -ne 'l;2q' ChangeLog 2> /dev/null`" = 'xdummy$$'; \
	then rm -f ChangeLog; fi

$(bin_SCRIPTS): Makefile
	rm -f $@ $@.tmp
	$(MKDIR_P) $(@D)
	srcdir=''; \
	  test -f ./$@.in || srcdir=$(srcdir)/; \
	  $(edit) $${srcdir}$@.in >$@.tmp
	chmod +x $@.tmp
	chmod a-w $@.tmp
	mv $@.tmp $@

bin/autoconf: bin/autoconf.in
bin/autoheader: $(srcdir)/bin/autoheader.in
bin/autom4te: $(srcdir)/bin/autom4te.in
bin/autoreconf: $(srcdir)/bin/autoreconf.in
bin/autoscan: $(srcdir)/bin/autoscan.in
bin/autoupdate: $(srcdir)/bin/autoupdate.in
bin/ifnames: $(srcdir)/bin/ifnames.in

# Additional checks.
check-local: check-forbidden-patterns
lib/autom4te.cfg: $(srcdir)/lib/autom4te.in Makefile
	rm -f $@ $@-t
	$(MKDIR_P) $(@D)
	$(edit) $(srcdir)/lib/autom4te.in >$@-t
	chmod a-w $@-t
	mv -f $@-t $@

lib/autoconf/autoconf.m4f: $(autoconf_m4f_dependencies)

lib/autoscan/autoscan.list: $(srcdir)/lib/autoscan/autoscan.pre
	$(MKDIR_P) $(@D)
	echo '# Automatically Generated: do not edit this file' >$@
	sed '/^[#]/!q' $(srcdir)/lib/autoscan/autoscan.pre >>$@
	( \
	  sed -n '/^[^#]/p' $(srcdir)/lib/autoscan/autoscan.pre; \
	  $(MY_AUTOM4TE) --cache '' -M -l autoconf-without-aclocal-m4 \
	    -t'AN_OUTPUT:$$1: $$2		$$3' \
	) | LC_ALL=C sort >>$@

lib/autoscan/autoscan.list: $(autoconf_m4f_dependencies) Makefile

lib/m4sugar/m4sugar.m4f: $(m4sugar_m4f_dependencies)
lib/m4sugar/m4sh.m4f: $(m4sh_m4f_dependencies)

lib/autotest/autotest.m4f: $(autotest_m4f_dependencies)

install-data-hook: install-data-hook-make-aux-scripts-executable
install-data-hook-make-aux-scripts-executable:
	for s in $(AUXSCRIPTS); do \
	  chmod +x "$(DESTDIR)$(pkgdatadir)/$$s"; \
	done

.PHONY: install-data-hook install-data-hook-make-aux-scripts-executable

man/autoconf.1:   $(common_dep) man/autoconf.w   man/autoconf.x   $(binsrcdir)/autoconf.in
man/autoheader.1: $(common_dep) man/autoheader.w man/autoheader.x $(binsrcdir)/autoheader.in
man/autom4te.1:   $(common_dep) man/autom4te.w   man/autom4te.x   $(binsrcdir)/autom4te.in
man/autoreconf.1: $(common_dep) man/autoreconf.w man/autoreconf.x $(binsrcdir)/autoreconf.in
man/autoscan.1:   $(common_dep) man/autoscan.w   man/autoscan.x   $(binsrcdir)/autoscan.in
man/autoupdate.1: $(common_dep) man/autoupdate.w man/autoupdate.x $(binsrcdir)/autoupdate.in
man/ifnames.1:    $(common_dep) man/ifnames.w    man/ifnames.x    $(binsrcdir)/ifnames.in

.w.1:
	@echo "Updating man page $@"
	$(MKDIR_P) $(@D)
	PATH="$(top_srcdir)/man$(PATH_SEPARATOR)$$PATH"; \
	PERL="$(PERL)"; \
	PACKAGE_NAME="$(PACKAGE_NAME)"; \
	VERSION="$(VERSION)"; \
	RELEASE_YEAR="$(RELEASE_YEAR)"; \
	top_srcdir="$(top_srcdir)"; \
	channeldefs_pm="$(channeldefs_pm)"; \
	export PATH PERL PACKAGE_NAME VERSION RELEASE_YEAR; \
	export top_srcdir channeldefs_pm; \
	$(HELP2MAN) \
	    --include=$(srcdir)/$*.x \
	    --include=$(srcdir)/man/common.x \
	    --source='$(PACKAGE_STRING)' \
	    --output=$@.t $(<F)
	if $(SED) $(remove_time_stamp) $@ >$@a.t 2>/dev/null && \
	   $(SED) $(remove_time_stamp) $@.t | cmp $@a.t - >/dev/null 2>&1; then \
		touch $@; \
	else \
		mv $@.t $@; \
	fi
	rm -f $@.t $@a.t

# To satisfy 'distcleancheck', we need to delete built manpages in
# 'distclean' when the build and source directories are not the same.
# We know we are in this case when 'man/common.x' doesn't exist.
distclean-local: distclean-local-man
distclean-local-man:
	test -f man/common.x || rm -f $(dist_man_MANS)

# The ':;' works around a redirected compound command bash exit status bug.
tests/package.m4: Makefile
	:;{ \
	  echo '# Signature of the current package.' && \
	  echo 'm4_define([AT_PACKAGE_NAME],      [$(PACKAGE_NAME)])' && \
	  echo 'm4_define([AT_PACKAGE_TARNAME],   [$(PACKAGE_TARNAME)])' && \
	  echo 'm4_define([AT_PACKAGE_VERSION],   [$(PACKAGE_VERSION)])' && \
	  echo 'm4_define([AT_PACKAGE_STRING],    [$(PACKAGE_STRING)])' && \
	  echo 'm4_define([AT_PACKAGE_BUGREPORT], [$(PACKAGE_BUGREPORT)])' && \
	  echo 'm4_define([AT_PACKAGE_URL],       [$(PACKAGE_URL)])'; \
	} > $@-t
	mv $@-t $@

tests/wrapper.in: $(srcdir)/tests/wrapper.as $(m4sh_m4f_dependencies)
	$(MY_AUTOM4TE) --language=M4sh $(srcdir)/tests/wrapper.as -o $@

$(wrappers): tests/wrapper.in
	rm -f $@ $@.tmp
	input=tests/wrapper.in \
	  && $(edit_wrapper) tests/wrapper.in >$@.tmp
	chmod +x $@.tmp
	chmod a-w $@.tmp
	mv -f $@.tmp $@
$(TESTSUITE): tests/package.m4 \
	      tests/local.at \
	      $(TESTSUITE_AT) \
	      lib/autotest/autotest.m4f
	$(AUTOTEST) $(AUTOTESTFLAGS) suite.at -o $@.tmp
	mv $@.tmp $@
$(distclean_generic): clean-local

clean-local:
	test ! -f $(TESTSUITE) || $(run_testsuite)  --clean
	rm -f *.tmp
	rm -f -r autom4te.cache

check-local: tests/atconfig tests/atlocal $(TESTSUITE)
	+$(run_testsuite) $(TESTSUITEFLAGS)

# Automake doesn't know how to regenerate this file because
# it's created via AC_CONFIG_COMMANDS.
tests/atconfig: $(top_builddir)/config.status
	cd $(top_builddir) && $(SHELL) ./config.status $@

# Run the test suite on the *installed* tree.
installcheck-local: tests/atconfig tests/atlocal $(TESTSUITE)
	+$(run_testsuite) AUTOTEST_PATH="$(bindir)" $(TESTSUITEFLAGS)

$(TESTSUITE_GENERATED_AT): tests/mktests.stamp
	@if test -f $@; then :; else \
	  rm -f tests/mktests.stamp; \
	  $(MAKE) $(AM_MAKEFLAGS) tests/mktests.stamp; \
	fi

tests/mktests.stamp : tests/mktests.pl $(AUTOCONF_FILES)
	@rm -f tests/mktests.tmp
	@touch tests/mktests.tmp
	$(PERL) $(srcdir)/tests/mktests.pl tests $(AUTOCONF_FILES)
	@mv -f tests/mktests.tmp $@

# The test suite cannot be run in parallel with itself.
maintainer-check:
	$(MAKE) $(AM_MAKEFLAGS) check
	$(MAKE) $(AM_MAKEFLAGS) maintainer-check-posix
expr:
	:;{					\
	  echo '#! $(SHELL)';			\
	  echo 'result=`$(EXPR) "$$@"`';	\
	  echo 'estatus=$$?';			\
	  echo 'cat <<EOF';			\
	  echo '$${result:-0}';			\
	  echo 'EOF';				\
	  echo 'exit $$estatus';		\
	} > $@-t
	chmod +x $@-t
	mv $@-t $@

# Try the test suite with more severe environments.
maintainer-check-posix: expr
	POSIXLY_CORRECT=yes $(MAKE) $(AM_MAKEFLAGS) check
	rm expr

check-coverage-run: all
	$(MKDIR_P) $(PERL_COVERAGE_DB)
	PERL5OPT="$(PERL_COVERAGE_FLAGS)"; export PERL5OPT; \
	$(MAKE) $(AM_MAKEFLAGS) check

check-coverage-report:
	@if test ! -d $(PERL_COVERAGE_DB); then \
	  echo "No coverage database found in '$(PERL_COVERAGE_DB)'." >&2; \
	  echo "Please run '$(MAKE) check-coverage' first" >&2; \
	  exit 1; \
	fi
	$(PERL_COVER) $(PERL_COVERAGE_DB) $(PERL_COVER_FLAGS)

# We don't use direct dependencies here because we'd like to be able
# to invoke the report even after interrupted check-coverage.
check-coverage: check-coverage-run
	$(MAKE) $(AM_MAKEFLAGS) check-coverage-report

clean-local: clean-coverage
clean-coverage:
	rm -rf $(PERL_COVERAGE_DB)

.PHONY: check-coverage check-coverage-run check-coverage-report clean-coverage

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
