if PACKAGE_dropbear

## <GENERIC>
comment "Generic options"

config DROPBEAR_STATIC_BUILD
	bool "Build static binaries"
	depends on DEVEL
	help
		Build all programs as statically linked.

		Default: disabled.

config DROPBEAR_LEGACY_COMPAT
	bool "Enable legacy options and features"
	## TODO: remove "default y" in 2026
	default y
	help
		Enable legacy options to be accessible.

		This enables options which are improve backward compatibility
		but are also known to have negative security impact.

		Default: enabled.

config DROPBEAR_SMALL_CODE
	bool "Small code"
	default y
	help
		Reduces binary size by several KB but makes the symmetrical ciphers and hashes slower (perhaps by 50%).

		Default: enabled.

config DROPBEAR_DEBUG_TRACE
	int "Verbose debug log level"
	range 0 5
	default 0
	help
		Define how much debug output is compiled in.

		* 0 = No verbose debug (default)
		* 1-3 = approx 4 Kb (connection, remote identity, algos, auth type info)
		* 4 = approx 17 Kb (detailed before connection)
		* 5 = approx 8 Kb (detailed after connection)

		Debug is enabled with -v at runtime. Repeat to increase.

		Default: 0.

config DROPBEAR_LOG_COMMANDS
	bool "Log commands"
	help
		Log the initial command sent by the clients.

		This does not include all shell / scp / sftp commands that a user executes
		during a session.

		Default: disabled.

config DROPBEAR_INETD_MODE
	bool "inetd mode"
	help
		Allow Dropbear server to be started on-demand by inetd superserver.

		OpenWrt starts Dropbear as daemon.

		Default: disabled.

## </GENERIC>

## <LOGIN OPTIONS>
comment "Login options"

config DROPBEAR_DO_HOST_LOOKUP
	bool "Reverse DNS"
	help
		Whether to do reverse DNS lookups of incoming connection IP addresses
		and report the DNS name in the log.

		Warning: If the system is under attack from many IP addresses,
		this will flood the DNS servers too.

		Default: disabled.

config DROPBEAR_SVR_PUBKEY_OPTIONS
	bool "Options in authorized_keys file"
	default y
	help
		Whether to take into account the key options in authorized_keys file.

		Supported options are:
		* no-port-forwarding
		* no-agent-forwarding
		* no-X11-forwarding
		* no-pty
		* restrict
		* permitopen="host:port"
		* command="forced_command"

		If DROPBEAR_SK_KEYS is enabled then following options are supported too:
		* no-touch-required
		* verify-required

		These options are documented in Dropbear man page (not installed).

		Default: enabled.

## ---
## Nowadays, utmp/wtmp is not supported by musl libc.
## Ref: https://wiki.musl-libc.org/faq.html#Q:_Why_is_the_utmp/wtmp_functionality_only_implemented_as_stubs?

## utmp-specific notes:
## In musl, pututline() and related functions are all stubs, and login(), logout() and ttyslot() don't exist.
## In Dropbear there is an option to write to utmp directly, but it uses ttyslot().
## So, there is currently no way to make utmp work with musl.
## Revisit this if/when Dropbear implements ttyslot() or an independent utmp direct write.
## ---
comment "* note: lastlog/login()/utmp/wtmp are unavailable with musl libc"
	depends on USE_MUSL

if !USE_MUSL

	config DROPBEAR_LASTLOG
		bool "Write lastlog"
		help
			/var/log/lastlog is a record of the last login of each user.
			To view the last login, use "lastlog" command (OpenWrt package shadow-lastlog).

			If enabled, Drobear will update it with SSH logins.
			If disabled, SSH logins will not be recorded.

			Warning: The lastlog record is considered a security and privacy risk by some.

			Default: disabled.

	config DROPBEAR_LASTLOG_PATH
		string "lastlog path:"
		default "/var/log/lastlog"
		depends on DROPBEAR_LASTLOG
		help
			Default: /var/log/lastlog

	config DROPBEAR_LOGINFUNC
		bool "Use login() and logout() functions"
		help
			If enabled, Dropbear will use login() and logout() functions to record logins in utmp and wtmp files.

			If disabled, see DROPBEAR_UTMP and DROPBEAR_WTMP options.

			Default: disabled.

	comment "* note: utmp/wtmp are handled by libc implementation rather than Dropbear"
		depends on DROPBEAR_LOGINFUNC

	config DROPBEAR_WTMP
		bool "Write wtmp"
		depends on !DROPBEAR_LOGINFUNC
		help
			/var/log/wtmp is a record of all previous logins.
			The file needs to be manually created - Dropbear will update it only if it already exists.
			To view login history, use "last" command, available in Busybox but not included by default.

			If enabled, Dropbear will add SSH logins to the record.
			If disabled, SSH logins will not be recorded.

			Warning: The wtmp record is considered a security and privacy risk by some.

			Default: disabled.

	config DROPBEAR_WTMP_PATH
		string "wtmp path:"
		default "/var/log/wtmp"
		depends on DROPBEAR_WTMP
		help
			Default: /var/log/wtmp

	config DROPBEAR_UTMP
		bool "Write utmp"
		depends on !DROPBEAR_LOGINFUNC
		help
			/var/run/utmp is a record of currently logged-in users.
			To view logged-in users, use "w", "who" or "users" commands.

			If enabled, Dropbear will keep it updated with users that log in via SSH.
			If disabled, SSH logins will not be recorded.

			Warning: The utmp record is considered a security and privacy risk by some.

			Default: disabled.

	config DROPBEAR_UTMP_PATH
		string "utmp path:"
		default "/var/run/utmp"
		depends on DROPBEAR_UTMP
		help
			Default: /var/run/utmp

	config DROPBEAR_PUTUTLINE
		bool "Use pututline() to write to utmp"
		depends on DROPBEAR_UTMP
		help
			If enabled, Dropbear will use pututline() to write into the utmp file.
			If disabled, Dropbear will write to utmp file directly.

			PS: DROPBEAR_UTMP_PATH value is likely to be ignored if DROPBEAR_PUTUTLINE is enabled.

			Default: disabled.

endif
## </LOGIN OPTIONS>

## <FEATURES>
comment "Features"

config DROPBEAR_REEXEC
	bool "ASLR for each connection"
	default y if !LOW_MEMORY_FOOTPRINT
	help
		Dropbear will re-execute itself for each incoming connection
		so that memory layout may be re-randomised (ASLR).
		Exploiting Dropbear vulnerabilities becomes harder
		but uses slightly more memory per connection.

		Default: enabled, except devices with very low memory.

config DROPBEAR_ZLIB
	bool "Compression"
	select PACKAGE_zlib
	help
		Enable support for compression using shared zlib library.

		Compression slows down transfer speed, especially on low-power CPUs
		found in routers, but may increase speed over slow network links
		if the CPU is fast enough to handle both compression and encryption
		at network speed.

		Default: disabled.

config DROPBEAR_DELAY_HOSTKEY
	bool "Auto-generate host keys (-R)"
	default y
	help
		Add command line argument "-R" to generate hostkeys as-needed
		when the first connection using that key type occurs.

		This avoids the need to otherwise run "dropbearkey" and avoids
		some problems with badly seeded /dev/urandom when systems first boot.

		Default: enabled.

config DROPBEAR_SVR_AGENTFWD
	bool "Authentication agent forwarding [SECURITY]"
	default y
	help
		Enables support for authentication agent forwarding.

		Server only: see DROPBEAR_CLI_AGENTFWD for client.

		This allows the use of local client keys to run a second ssh client to connect from the server to another server, without the need to install the keys on the fist server too.

		Common example: ssh to a server and use git on that server to push to github using local ssh keys, not the keys installed on the server.

		Default: enabled.

		SECURITY NOTES:

		SSH agent forwarding might cause security issues (locally and on the server).

		Hovewer, it's enabled by default for compatibility with previous OpenWrt/Dropbear releases.

config DROPBEAR_SVR_REMOTETCPFWD
	bool "Remote port forwarding: server -> client"
	default y
	help
		Support remote port forwarding.

		Server listens and forwards connections to client.
		Server only; see DROPBEAR_CLI_REMOTETCPFWD for client.

		Default: enabled.

config DROPBEAR_SVR_LOCALTCPFWD
	bool "Local port forwarding: client -> server"
	default y
	help
		Support local port forwarding.

		Client listens and forwards connections to server.
		Server only; see DROPBEAR_CLI_LOCALTCPFWD for client.

		Default: enabled.

config DROPBEAR_SVR_LOCALSTREAMFWD
	bool "Local port forwarding: client TCP socket -> server unix socket"
	default y
	help
		Support local port forwarding to unix sockets.

		Client listens and forwards connections to unix socket on server side.
		Server only.

		Default: enabled.

config DROPBEAR_X11FWD
	bool "X11 forwarding"
	help
		Supports X11 forwarding.

		OpenWrt doesn't have any Xorg programs by default.
		Server only.

		Default: disabled.

config DROPBEAR_SCP
	bool "SCP file transfer program"
	default y
	help
		Include the SCP file transfer program.

		Default: enabled.

config DROPBEAR_SFTPSERVER
	bool "Support external SFTP server"
	default y if !SMALL_FLASH
	help
		Enable running a SFTP server (such as the one included with OpenSSH).
		The SFTP server program is not provided by Dropbear itself.
		SFTP server must be installed as /usr/libexec/sftp-server

		Default: enabled, except devices with very small flash.

## </FEATURES>

## <CLIENT>
menuconfig DROPBEAR_DBCLIENT
	bool "dbclient (Dropbear SSH client)"
	default y
	help
		Build dbclient, the Dropbear SSH client.

		Default: enabled.

	if DROPBEAR_DBCLIENT

	config DROPBEAR_USER_ALGO_LIST
		bool "Let user choose ciphers and MACs"
		default y
		help
			Adds dbclient "-c" and "-m" command line options.

			Allows using "-c <cipher list>" and/or "-m <MAC list>"
			to choose preferred ciphers and MACs.

			Run "dbclient -c help" to list supported ciphers
			and "dbclient -m help" to list supported MACs.

			Default: enabled.

	config DROPBEAR_USE_SSH_CONFIG
		bool "Use ssh_config"
		help
			Whether to use some options from ~/.ssh/dropbear_config.

			Supported top-most option is "Host" (no "Match" support is present).

			Supported options for "Host" are:
			* Hostname
			* Port
			* User
			* IdentityFile

			These options are well-documented in ssh_config(5) man page.

			Default: disabled.

	config DROPBEAR_CLI_IMMEDIATE_AUTH
		bool "Send auth request immediately [COMPATIBILITY]"
		help
			Save a network roundtrip by sending a real auth request
			immediately after sending a query for the available methods.

			This is not yet enabled by default since it could
			cause problems with non-compliant servers.

			Default: disabled.

	config DROPBEAR_USE_PASSWORD_ENV
		bool "Use env password"
		default y
		help
			Allow specifying the password for dbclient via the DROPBEAR_PASSWORD environment variable.

			Default: enabled.

	config DROPBEAR_CLI_ASKPASS_HELPER
		bool "Support askpass helper"
		help
			Allow the use of a helper program for the ssh client.

			The helper program should be specified in the SSH_ASKPASS environment variable,
			and dbclient should be run with DISPLAY set and no tty.
			The program should return the password on standard output.

			Default: disabled.

	config DROPBEAR_CLI_AGENTFWD
		bool "Authentication agent forwarding [SECURITY]"
		default y
		help
			Enables support for authentication agent forwarding.

			Client only: see DROPBEAR_SVR_AGENTFWD for server.

			This allows the use of local client keys to run a second ssh client
			to connect from the server to another server, without the need to install
			the keys on the first server too.

			Common example: ssh to a server and use git on that server to push to
			github using local ssh keys, not the keys installed on the server.

			Default: enabled.

			SECURITY NOTES:

			SSH agent forwarding might cause security issues (locally and on the server).

			Hovewer, it's enabled by default for compatibility with previous OpenWrt/Dropbear releases.

	config DROPBEAR_CLI_LOCALTCPFWD
		bool "Local port forwarding (-L)"
		default y
		help
			Support local port forwarding.

			Client listens and forwards connections to server.

			Client only; see DROPBEAR_SVR_LOCALTCPFWD for server.

			Default: enabled.

	config DROPBEAR_CLI_REMOTETCPFWD
		bool "Remote port forwarding (-R)"
		default y
		help
			Support remote port forwarding.

			Server listens and forwards connections to client.

			Client only; see DROPBEAR_SRV_REMOTETCPFWD for server.

			Default: enabled.

	config DROPBEAR_CLI_PROXYCMD
		bool "Proxy command (-J)"
		default y
		help
			Support "-J <proxycommand>" to run the connection through a pipe
			to a program rather the normal TCP connection.

			Default: enabled.

	config DROPBEAR_CLI_NETCAT
		bool "Netcat-alike forwarding (-B)"
		help
			Support "-B <endhost:endport>" Netcat-alike forwarding.

			Default: disabled.

	comment "Multi-hop support is unavailable: enable both DROPBEAR_CLI_NETCAT and DROPBEAR_CLI_PROXYCMD"
		depends on !DROPBEAR_CLI_NETCAT || !DROPBEAR_CLI_PROXYCMD

	config DROPBEAR_CLI_MULTIHOP
		bool "Multi-hop support"
		default y
		depends on DROPBEAR_CLI_NETCAT && DROPBEAR_CLI_PROXYCMD
		help
			Support "[user@]host[/port][,[user@]host/port],...]" connections.

			This option is required to support multi-hop connections in Dropbear client as well as DROPBEAR_CLI_PROXYCMD.

			Default: enabled.

	endif
## </CLIENT>

## <RESOURCE LIMITS>
menu "Resource limits"

	config DROPBEAR_KEX_REKEY_TIMEOUT
		int "Rekey limit (seconds)"
		range 600 604800
		default 28800
		help
			Specifies the maximum amount of time before the session key is renegotiated.

			Note: it's not possible to configure this value in run-time.

			Possible values: 600 (10 minutes) to 604800 (7 days)
			Default: 28800 (8 hours)

	config DROPBEAR_KEX_REKEY_DATA
		int "Rekey limit (bytes)"
		range 65536 2147418112
		default 1073741824
		help
			Specifies the maximum amount of data that may be transmitted or received
			before the session key is renegotiated.

			Note: it's not possible to configure this value in run-time.

			Possible values: 65536 (64 KiB) to 2147418112 (2 GiB - 64 KiB)
			Default: 1073741824 (1 GiB)

	config DROPBEAR_AUTH_TIMEOUT
		int "Unauthenticated timeout (seconds)"
		range 30 3600
		default 300
		help
			Close connections to clients which haven't authenticated after specified timeout.

			Note: it's not possible to configure this value in run-time.

			Possible values: 30 to 3600 (1 hour)
			Default: 300 (5 minutes)

	config DROPBEAR_MAX_AUTH_TRIES
		int "Max. failed authentications"
		range 1 80
		default 10
		help
			Default maximum number of failed authentication tries (server option).

			This can be changed at run-time with the -T argument.

			Possible values: 1 to 80 (from src/sysoptions.h)
			Default: 10

	config DROPBEAR_UNAUTH_CLOSE_DELAY
		int "Delay closing unauth. connections (seconds)"
		range 0 3600
		default 0
		help
			Delay introduced before closing an unauthenticated session.
			Can be set to, say 30 seconds, to reduce the speed of password brute forcing.

			There is a risk of denial of service by setting this.

			Note: it's not possible to configure this value in run-time.

			Possible values: 0 to 3600 (1 hour)
			Default: 0 (disabled)

	config DROPBEAR_MAX_UNAUTH_PER_IP
		int "Max. unauthenticated connections per IP"
		range 1 1024
		default 5
		help
			Specify the number of clients allowed to be connected but not yet authenticated.
			After this limit, connections are rejected.
			This setting is per IP, to prevent DoS attacks.

			Note: it's not possible to configure this value in run-time.

			Possible values: 1 to 1024
			Default: 5

	config DROPBEAR_MAX_UNAUTH_CLIENTS
		int "Max. unauthenticated connections (total)"
		range 1 1024
		default 30
		help
			Specify the number of clients allowed to be connected but not yet authenticated.
			After this limit, connections are rejected.
			This setting is the global number, to prevent memory exhaustion
			when attacks come from different IPs.

			Note: it's not possible to configure this value in run-time.

			Possible values: 1 to 1024
			Default: 30

	config DROPBEAR_DEFAULT_RECV_WINDOW
		int "Default TCP receive window size (bytes)"
		range 256 10485760
		default 32768 if LOW_MEMORY_FOOTPRINT
		default 262144
		help
			TCP connections require acknowledgement of received data.
			Window size is the maximum number of bytes that can be sent
			on a connection before having to wait for an ACK packet.
			This amount of memory is allocated as a per-connection receive buffer.
			Increasing this value can make a significant difference to network performance
			when SSH is used for large data transfers (SCP, SFTP, tunnels)
			and the CPU can handle the encryption at network speed.

			This can be changed at run-time with the -W argument.

			Possible values: 256 to 10485760 (10MiB, from src/sysoptions.h)
			Default: 32768 (32 KiB) for devices with very low memory
			and 262144 (256 KiB) otherwise.

	config DROPBEAR_DEFAULT_KEEPALIVE
		int "Default KeepAlive interval (seconds)"
		range 0 604800
		default 0
		help
			Ensure that data is transmitted every KeepAlive seconds.
			Applies to both server and client.

			This can be changed at run-time with the -K argument.

			Possible values: 0 to 604800 (7 days)
			Default: 0 (disabled)

	config DROPBEAR_DEFAULT_KEEPALIVE_LIMIT
		int "Default KeepAlive limit"
		range 1 30
		default 3
		help
			If this many KEEPALIVES are sent with no packets received from the other side, disconnect.
			Applies to both server and client.

			Note: it's not possible to configure this value in run-time.

			Possible values: 1 to 30
			Default: 3

	config DROPBEAR_DEFAULT_IDLE_TIMEOUT
		int "Default idle timeout (seconds)"
		range 0 604800
		default 0
		help
			If no traffic is sent/received in IDLE_TIMEOUT seconds, disconnect.
			Applies to both server and client.

			Note: values below 30 seconds are not recommended.

			This can be changed at run-time with the -I argument.

			Possible values: 0 to 604800 (7 days)
			Default: 0 (disabled).

endmenu
## </RESOURCE LIMITS>

## <ENCRYPTION>
menu "Encryption options"

	comment "Symmetric-key ciphers:"

	config DROPBEAR_3DES
		bool "3DES [WEAK]"
		depends on DROPBEAR_LEGACY_COMPAT
		help
			This enables the following authenticated encryption cipher:
			 * 3des-ctr - CTR mode
			 * 3des-cbc - CBC mode

			Some very old SSH implementations might only support 3DES.
			Keeping this cipher enables a downgrade attack on the connection, if the client allows it.

			Default: disabled.

	config DROPBEAR_AES128
		bool "AES128"
		default y
		help
			This enables the following authenticated encryption cipher:
			 * aes128-gcm@openssh.com - GCM mode
			 * aes128-ctr             - CTR mode
			 * aes128-cbc             - CBC mode

			Enables AES with 128 bit key size.
			AES is very secure, but slow. It is preferred on systems with AES hardware acceleration.

			Including both AES keysize variants (128 and 256) will result in a minimal size increase.

			Default: enabled.

	config DROPBEAR_AES256
		bool "AES256"
		default y
		help
			This enables the following authenticated encryption cipher:
			 * aes256-gcm@openssh.com - GCM mode
			 * aes256-ctr             - CTR mode
			 * aes256-cbc             - CBC mode

			Enables AES with 256 bit key size.
			AES is very secure, but slow. It is preferred on systems with AES hardware acceleration.

			Including both AES keysize variants (128 and 256) will result in a minimal size increase.

			Default: enabled.

	config DROPBEAR_CHACHA20POLY1305
		bool "ChaCha20-Poly1305"
		default y
		help
			This enables the following authenticated encryption cipher:
			 * chacha20-poly1305@openssh.com

			ChaCha20 is a symmetric-key stream cipher.
			Poli1305 is hash function used for authentication.
			ChaCha20-Poly1305 provides both encryption and authentication
			without any additional cipher modes or MACs.

			These algorithms are generally faster than AES on CPUs without dedicated AES instructions.

			Default: enabled.

	comment "WARNING! At least one cipher must be selected."
		depends on !DROPBEAR_3DES && !DROPBEAR_AES128 && !DROPBEAR_AES256 && !DROPBEAR_CHACHA20POLY1305

	## <CIPHER MODE>
	if DROPBEAR_3DES || DROPBEAR_AES128 || DROPBEAR_AES256

	comment "Cipher modes:"

	config DROPBEAR_ENABLE_CTR_MODE
		bool "CTR, Counter mode"
		default y
		help
			This enables the following authenticated encryption cipher:
			 * 3des-ctr   - 3DES
			 * aes128-ctr - AES128
			 * aes256-ctr - AES256

			Default: enabled.

	config DROPBEAR_ENABLE_CBC_MODE
		bool "CBC, Cipher Block Chaining mode [WEAK]"
		help
			This enables the following authenticated encryption cipher:
			 * 3des-cbc   - 3DES
			 * aes128-cbc - AES128
			 * aes256-cbc - AES256

			This mode is susceptible to ciphertext stealing and padding attacks.

			Default: disabled.

	config DROPBEAR_ENABLE_GCM_MODE
		bool "GCM, Galois-Counter mode [WEAK]"
		help
			This enables the following authenticated encryption cipher:
			 * aes128-gcm@openssh.com - AES128
			 * aes256-gcm@openssh.com - AES256

			The authentication part of the GCM can be attacked by ciphertext forgery.

			Default: disabled.

	comment "WARNING! Block ciphers require at least one cipher mode to be selected."
		depends on !DROPBEAR_ENABLE_CTR_MODE && !DROPBEAR_ENABLE_CBC_MODE && !DROPBEAR_ENABLE_GCM_MODE

	endif
	## </CIPHER MODE>

	## <MAC>
	if DROPBEAR_3DES || DROPBEAR_AES128 || DROPBEAR_AES256

	comment "Message authentication codes (MAC):"

	config DROPBEAR_SHA1_96_HMAC
		bool "SHA1-96-HMAC [WEAK]"
		depends on DROPBEAR_LEGACY_COMPAT
		help
			This enables the following message authentication code:
			 * hmac-sha1-96

			Enables SHA1 with hash length truncated to 96 bit.
			Very old implementations may need it.

			Default: disabled.

	config DROPBEAR_SHA1_HMAC
		bool "SHA1-HMAC [WEAK]"
		depends on DROPBEAR_LEGACY_COMPAT
		help
			This enables the following message authentication code:
			 * hmac-sha1

			SHA1 generates 160 bit hashes. They are considered weak when used for signing (sha1-rsa keys).
			Very old implementations may need it.

			Default: disabled.

	config DROPBEAR_SHA2_256_HMAC
		bool "SHA256-HMAC"
		default y
		help
			This enables the following message authentication code:
			 * hmac-sha2-256

			SHA2 with 256 bit hash length.

			Default: enabled.

	config DROPBEAR_SHA2_512_HMAC
		bool "SHA512-HMAC"
		help
			This enables the following message authentication code:
			 * hmac-sha2-512

			SHA2 with 512 bit hash length is slower than SHA256 with little added benefits,
			as SHA256 is sufficiently strong.

			Default: disabled.

	comment "WARNING! Ciphers without authentication require at least one MAC to be enabled."
		depends on !DROPBEAR_SHA1_96_HMAC && !DROPBEAR_SHA1_HMAC && !DROPBEAR_SHA2_256_HMAC && !DROPBEAR_SHA2_512_HMAC

	endif
	## </MAC>

	comment "Asymmetric-key ciphers:"

	config DROPBEAR_DSS
		bool "DSS [WEAK]"
		depends on DROPBEAR_LEGACY_COMPAT
		help
			This enables the following public key algorithm:
			 * ssh-dss

			DSS uses 1024 bit private keys (too small) and SHA1 signing (weak).

			Default: disabled.

	config DROPBEAR_RSA_SHA1
		bool "RSA-SHA1 [WEAK]"
		depends on DROPBEAR_LEGACY_COMPAT
		help
			This enables the following public key algorithm:
			 * ssh-rsa

			SHA1 support is required to communicate with some older implementations.
			It will be removed in future due to SHA1 insecurity.

			Default: disabled.

	config DROPBEAR_RSA
		bool "RSA-SHA256"
		default y
		help
			This enables the following public key algorithm:
			 * rsa-sha2-256

			RSA-SHA256 uses SHA2 256 bit hashes for authentication.

			Default: enabled.

	config DROPBEAR_DEFAULT_RSA_SIZE
		int "Default RSA key size"
		range 1024 8192
		default 2048
		depends on DROPBEAR_RSA_SHA1 || DROPBEAR_RSA
		help
			Sets the default RSA key size, for example, when auto-generating server keys.

			Possible values: 1024, 2048, 4096, 8192.
			Default: 2048.

	config DROPBEAR_ECDSA
		bool "ECDSA"
		help
			This enables the following public key algorithm:
			 * ecdsa-sha2-nistp256 - 256-bit elliptic curve
			 * ecdsa-sha2-nistp384 - 384-bit elliptic curve
			 * ecdsa-sha2-nistp521 - 521-bit elliptic curve

			Along with FIDO/U2F also enables the following public key algorithm:
			 * sk-ecdsa-sha2-nistp256@openssh.com - 256-bit elliptic curve

			ECDSA significantly faster than RSA or DSS, but slower than Ed25519.

			Default: disabled.

	config DROPBEAR_ED25519
		bool "Ed25519"
		default y if !SMALL_FLASH
		help
			This enables the following public key algorithm:
			 * ssh-ed25519

			Along with FIDO/U2F also enables the following public key algorithm:
			 * sk-ssh-ed25519@openssh.com

			Ed25519 uses Curve25519 and SHA512 and is faster than RSA and ECDSA.

			Default: enabled, except devices with very small flash.

	comment "WARNING! At least one asymmetric-key algorithm must be enabled."
		depends on !DROPBEAR_DSS && !DROPBEAR_RSA && !DROPBEAR_ECDSA && !DROPBEAR_ED25519

	## <KEX ALGORITHM>
	comment "Key exchange algorithms"

	config DROPBEAR_DH_GROUP1
		bool "DH group1: SHA1, 1024 bit [WEAK]"
		depends on DROPBEAR_LEGACY_COMPAT
		help
			This enables the following key exchange algorithm:
			 * diffie-hellman-group1-sha1

			Diffie-Hellman group1 is too small for security, though is necessary for
			compatibility with some very old implementations such as Dropbear < v0.53.

			Default: disabled.

	config DROPBEAR_DH_GROUP1_CLIENTONLY
		bool "DH group1 only for Dropbear client"
		default y
		depends on DROPBEAR_DBCLIENT && DROPBEAR_DH_GROUP1
		help
			When enabled, Diffie-Hellman group1 will only be allowed by Dropbear client,
			not by the server, due to concerns over its strength.
			If disabled, DH group1 is allowed by Dropbear server too.

			Default: enabled.

	config DROPBEAR_DH_GROUP14_SHA1
		bool "DH group14: SHA1, 2048 bit [WEAK]"
		depends on DROPBEAR_LEGACY_COMPAT
		help
			This enables the following key exchange algorithm:
			 * diffie-hellman-group14-sha1

			Diffie-Hellman group14 is supported by most implementations.
			This variant uses weaker SHA1 hashes.

			Default: disabled.

	config DROPBEAR_DH_GROUP14_SHA256
		bool "DH group14: SHA2-256, 2048 bit"
		default y
		help
			This enables the following key exchange algorithm:
			 * diffie-hellman-group14-sha256

			Diffie-Hellman group14 is supported by most implementations.

			Default: enabled.

	config DROPBEAR_DH_GROUP16
		bool "DH group16: SHA2-512, 4096 bit"
		help
			This enables the following key exchange algorithm:
			 * diffie-hellman-group16-sha512

			Diffie-Hellman group16 provides a greater strength level
			but it is slower and increases binary size.

			Default: disabled.

	config DROPBEAR_ECDH
		bool "ECDH"
		help
			This enables the following key exchange algorithm:
			 * ecdh-sha2-nistp256 - 256-bit elliptic curve
			 * ecdh-sha2-nistp384 - 384-bit elliptic curve
			 * ecdh-sha2-nistp521 - 521-bit elliptic curve

			ECDH is faster than non-elliptic-curve methods.

			Default: disabled.

	config DROPBEAR_CURVE25519
		bool "Curve25519"
		default y
		help
			This enables the following key exchange algorithm:
			 * curve25519-sha256

			Curve25519 is faster than non-elliptic-curve methods.

			Default: enabled.

	config DROPBEAR_MLKEM768
		bool "mlkem768 [POST-QUANTUM]"
		help
			This enables the following key exchange algorithm:
			 * mlkem768x25519-sha256

			Post-quantum KEM can avoid harvest-now-decrypt-later style attacks.

			Default: enabled, except devices with very small flash.

	config DROPBEAR_SNTRUP761
		bool "sntrup761 [POST-QUANTUM]"
		default y if !SMALL_FLASH
		help
			This enables the following key exchange algorithm:
			 * sntrup761x25519-sha512

			Post-quantum KEM can avoid harvest-now-decrypt-later style attacks.

			Default: enabled, except devices with very small flash.

	comment "WARNING! At least one key exchange algorithm must be enabled."
		depends on !DROPBEAR_DH_GROUP1 && !DROPBEAR_DH_GROUP14_SHA1 && ! DROPBEAR_DH_GROUP14_SHA256 && !DROPBEAR_DH_GROUP16 && !DROPBEAR_ECDH && !DROPBEAR_CURVE25519 && !DROPBEAR_MLKEM768 && !DROPBEAR_SNTRUP761
	## </KEX ALGORITHM>

	## <ELLIPTIC CURVE>
	if DROPBEAR_ECDH || DROPBEAR_ECDSA

	comment "Elliptic curves:"

	config DROPBEAR_ECC_256
		bool "256-bit curve"
		default y
		help
			This enables the following key exchange algorithm:
			 * ecdh-sha2-nistp256

			This enables the following public key algorithm:
			 * ecdsa-sha2-nistp256

			Along with FIDO/U2F also enables the following public key algorithm:
			 * sk-ecdsa-sha2-nistp256@openssh.com

			Default: enabled.

	config DROPBEAR_ECC_384
		bool "384-bit curve"
		help
			This enables the following key exchange algorithm:
			 * ecdh-sha2-nistp384

			This enables the following public key algorithm:
			 * ecdsa-sha2-nistp384

			Default: disabled.

	config DROPBEAR_ECC_521
		bool "521-bit curve"
		help
			This enables the following key exchange algorithm:
			 * ecdh-sha2-nistp521

			This enables the following public key algorithm:
			 * ecdsa-sha2-nistp521

			Default: disabled.

	comment "WARNING! At least one elliptic curve must be enabled."
		depends on !DROPBEAR_ECC_256 && !DROPBEAR_ECC_384 && !DROPBEAR_ECC_521

	endif
	## </ELLIPTIC CURVE>

	## <U2F>
	comment "FIDO/U2F security keys are not supported - enable DROPBEAR_ECDSA and/or DROPBEAR_ED25519"
		depends on !DROPBEAR_ECDSA && !DROPBEAR_ED25519

	config DROPBEAR_SK_KEYS
		bool "FIDO/U2F security keys"
		default y if !SMALL_FLASH
		depends on DROPBEAR_ECDSA || DROPBEAR_ED25519
		help
			Allows Dropbear server to validate U2F security keys.
			The corresponding DROPBEAR_SK_ECDSA and/or DROPBEAR_SK_ED25519 also needs to be set.

			Dropbear client does not support U2F.

			Default: enabled, except devices with very small flash.

	if DROPBEAR_SK_KEYS

	comment "FIDO/U2F with ECDSA is not supported - enable DROPBEAR_ECC_256"
		depends on DROPBEAR_ECDSA && !DROPBEAR_ECC_256

	config DROPBEAR_SK_ECDSA
		bool "FIDO/U2F with ECDSA"
		default y
		depends on DROPBEAR_ECDSA && DROPBEAR_ECC_256
		help
			This enables the following public key algorithm:
			 * sk-ecdsa-sha2-nistp256@openssh.com

			Default: enabled.

	config DROPBEAR_SK_ED25519
		bool "FIDO/U2F with Ed25519"
		default y
		depends on DROPBEAR_ED25519
		help
			This enables the following public key algorithm:
			 * sk-ssh-ed25519@openssh.com

			Default: enabled.

	comment "WARNING! At least one U2F algorithm must be enabled."
		depends on !DROPBEAR_SK_ECDSA && !DROPBEAR_SK_ED25519

	endif
	## </U2F>

endmenu
## </ENCRYPTION>

## TODO: following options should be removed in 2027

## <LEGACY OPTIONS>
config DROPBEAR_ECC
	bool
	imply DROPBEAR_ECDH
	imply DROPBEAR_ECDSA
	imply DROPBEAR_ECC_256

config DROPBEAR_ECC_FULL
	bool
	imply DROPBEAR_ECDH
	imply DROPBEAR_ECDSA
	imply DROPBEAR_ECC_256
	imply DROPBEAR_ECC_384
	imply DROPBEAR_ECC_521

config DROPBEAR_ECDSA_SK
	bool
	imply DROPBEAR_SK_KEYS
	imply DROPBEAR_SK_ECDSA
	imply DROPBEAR_ECC_256

config DROPBEAR_ED25519_SK
	bool
	imply DROPBEAR_SK_KEYS
	imply DROPBEAR_SK_ED25519

config DROPBEAR_ASKPASS
	bool
	depends on DROPBEAR_DBCLIENT
	imply DROPBEAR_CLI_ASKPASS_HELPER

config DROPBEAR_DBCLIENT_AGENTFORWARD
	bool
	depends on DROPBEAR_DBCLIENT
	imply DROPBEAR_CLI_AGENTFWD

config DROPBEAR_AGENTFORWARD
	bool
	imply DROPBEAR_SVR_AGENTFWD

## it's not possible to negate selection via Kconfig [at least] of following options:
## - DROPBEAR_AES128
## - DROPBEAR_AES256
## - DROPBEAR_ENABLE_CTR_MODE
## - DROPBEAR_RSA
## - DROPBEAR_RSA_SHA1
config DROPBEAR_MODERN_ONLY
	bool
	imply DROPBEAR_ED25519
	imply DROPBEAR_CURVE25519
	imply DROPBEAR_CHACHA20POLY1305

## </LEGACY OPTIONS>

endif # PACKAGE_dropbear
