From 81f5150aba929b222783a60a408b9a20a23bd171 Mon Sep 17 00:00:00 2001
From: Calvin Johnson <calvin.johnson@nxp.com>
Date: Sat, 16 Sep 2017 07:05:49 +0530
Subject: [PATCH] staging: add fsl_ppfe driver
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This is squash of all commits with ppfe driver taken from NXP 6.12 tree:
https://github.com/nxp-qoriq/linux/tree/lf-6.12.y

net: fsl_ppfe: dts binding for ppfe

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>

staging: fsl_ppfe/eth: header files for pfe driver

This patch has all pfe header files.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>

staging: fsl_ppfe/eth: introduce pfe driver

	This patch introduces Linux support for NXP's LS1012A Packet
Forwarding Engine (pfe_eth). LS1012A uses hardware packet forwarding
engine to provide high performance Ethernet interfaces. The device
includes two Ethernet ports.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>

staging: fsl_ppfe/eth: fix RGMII tx delay issue

Recently logic to enable RGMII tx delay was changed by
below patch.

https://patchwork.kernel.org/patch/9447581/

Based on the patch, appropriate change is made in PFE driver.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>

staging: fsl_ppfe/eth: remove unused functions

Remove unused functions hif_xmit_pkt & hif_lib_xmit_pkt.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: fix read/write/ack idx issue

While fixing checkpatch errors some of the index increments
were commented out. They are enabled.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: Make phy_ethtool_ksettings_get return void

Make return value void since function never return meaningful value

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: add function to update tmu credits

__hif_lib_update_credit function is used to update the tmu credits.
If tx_qos is set, tmu credit is updated based on the number of packets
transmitted by tmu.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>

staging: fsl_ppfe/eth: Avoid packet drop at TMU queues

Added flow control between TMU queues and PFE Linux driver,
based on TMU credits availability.
Added tx_qos module parameter to control this behavior.
Use queue-0 as default queue to transmit packets.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Akhila Kavi <akhila.kavi@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>

staging: fsl_ppfe/eth: Enable PFE in clause 45 mode

when we opearate in clause 45 mode, we need to call
the function get_phy_device() with its 3rd argument as
"true" and then the resultant phy device needs to be
register with phy layer via phy_device_register()

Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>

staging: fsl_ppfe/eth: Disable autonegotiation for 2.5G SGMII

PCS initialization sequence for 2.5G SGMII interface governs
auto negotiation to be in disabled mode

Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>

staging: fsl_ppfe/eth: calculate PFE_PKT_SIZE with SKB_DATA_ALIGN

pfe packet size was calculated without considering skb data alignment
and this resulted in jumbo frames crashing kernel when the
cacheline size increased from 64 to 128 bytes with
commit 97303480753e ("arm64: Increase the max granular size").

Modify pfe packet size caclulation to include skb data alignment of
sizeof(struct skb_shared_info).

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: support for userspace networking

This patch adds the userspace mode support to fsl_ppfe network driver.
In the new mode, basic hardware initialization is performed in kernel, while
the datapath and HIF handling is the responsibility of the userspace.

The new command line parameter is added to initialize the ppfe module
in userspace mode. By default the module remains in kernelspace networking
mode.
To enable userspace mode, use "insmod pfe.ko us=1"

Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>

staging: fsl_ppfe/eth: unregister netdev after pfe_phy_exit

rmmod pfe.ko throws below warning:

kernfs: can not remove 'phydev', no directory
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2230 at fs/kernfs/dir.c:1481
kernfs_remove_by_name_ns+0x90/0xa0

This is caused when the unregistered netdev structure is accessed to
disconnect phy.

Resolve the issue by unregistering netdev after disconnecting phy.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: HW parse results for DPDK

HW Parse results are included in the packet headroom.
Length and Offset calculation now accommodates parse info size.

Signed-off-by: Archana Madhavan <archana.madhavan@nxp.com>

staging: fsl_ppfe/eth: reorganize pfe_netdev_ops

Reorganize members of struct pfe_netdev_ops to match with the order
of members in struct net_device_ops defined in include/linux/netdevice.h

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: use mask for rx max frame len

Define and use PFE_RCR_MAX_FL_MASK to properly set Rx max frame
length of MAC Receive Control Register.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: define pfe ndo_change_mtu function

Define ndo_change_mtu function for pfe. This sets the max Rx frame
length to the new mtu.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: remove jumbo frame enable from gemac init

MAC Receive Control Register was configured to allow jumbo frames.
This is removed as jumbo frames can be supported anytime by changing
mtu which will in turn modify MAX_FL field of MAC RCR.
Jumbo frames caused pfe to hang on LS1012A rev 1.0 Silicon due to
erratum A-010897.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: disable CRC removal

Disable CRC removal from the packet, so that packets are forwarded
as is to Linux.
CRC configuration in MAC will be reflected in the packet received
to Linux.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: handle ls1012a errata_a010897

On LS1012A rev 1.0, Jumbo frames are not supported as it causes
the PFE controller to hang. A reset of the entire chip is required
to resume normal operation.

To handle this errata, frames with length > 1900 are truncated for
rev 1.0 of LS1012A.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: replace magic numbers

Replace magic numbers and some cosmetic changes.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: resolve indentation warning

Resolve the following indentation warning:

drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c:
In function ‘pfe_get_gemac_if_proprties’:
drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c:96:2:
warning: this ‘else’ clause does not guard...
[-Wmisleading-indentation]
  else
  ^~~~
drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c:98:3:
note: ...this statement, but the latter is misleadingly indented as
if it were guarded by the ‘else’
   pdata->ls1012a_eth_pdata[port].mdio_muxval = phy_id;
   ^~~~~

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: add fixed-link support

In cases where MAC is not connected to a normal MDIO-managed PHY
device, and instead to a switch, it is configured as a "fixed-link".
Code to handle this scenario is added here.

phy_node in the dtb is checked to identify a fixed-link.
On identification of a fixed-link, it is registered and connected.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe: add support for a char dev for link status

Read and IOCTL support is added. Application would need to open,
read/ioctl the /dev/pfe_us_cdev device.
select is pending as it requires a wait_queue.

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe: enable hif event from userspace

HIF interrupts are enabled using ioctl from user space,
and epoll wait from user space wakes up when there is an HIF
interrupt.

Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>

staging: fsl_ppfe: performance tuning for user space

interrupt coalescing of 100 usec is added.

Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>

staging: fsl_ppfe/eth: Update to use SPDX identifiers

Replace license text with corresponding SPDX identifiers and update the
format of existing SPDX identifiers to follow the new guideline
Documentation/process/license-rules.rst.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: misc clean up

- remove redundant hwfeature init
- remove unused vars from ls1012a_eth_platform_data
- To handle ls1012a errata_a010897, PPFE driver requires GUTS driver
to be compiled in. Select FSL_GUTS when PPFE driver is compiled.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: reorganize platform phy parameters

- Use "phy-handle" and of_* functions to get phy node and fixed-link
parameters

- Reorganize phy parameters and initialize them only if phy-handle
or fixed-link is defined in the dtb.

- correct typo pfe_get_gemac_if_proprties to pfe_get_gemac_if_properties

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: support single interface initialization

- arrange members of struct mii_bus in sequence matching phy.h
- if mdio node is defined, use of_mdiobus_register to register
  child nodes (phy devices) available on the mdio bus.
- remove of_phy_register_fixed_link from pfe_phy_init as it is being
  handled in pfe_get_gemac_if_properties
- remove mdio enabled check
- skip phy init, if no PHY or fixed-link

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

net: fsl_ppfe: update dts properties for phy

Use commonly used phy-handle property and mdio subnode to handle
phy properties.

Deprecate bindings fsl,gemac-phy-id & fsl,pfe-phy-if-flags.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: remove unused code

- remove gemac-bus-id related code that is unused.
- remove unused prototype gemac_set_mdc_div.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: separate mdio init from mac init

- separate mdio initialization from mac initialization
- Define pfe_mdio_priv_s structure to hold mii_bus structure and other
  related data.
- Modify functions to work with the separted mdio init model.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: adapt to link mode based phydev changes

Setting link mode bits have changed with the integration of
commit (3c1bcc8 net: ethernet: Convert phydev advertize and
supported from u32 to link mode). Adapt to the new method of
setting and clearing the link mode bits.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: use generic soc_device infra instead of fsl_guts_get_svr()

Commit ("soc: fsl: guts: make fsl_guts_get_svr() static") has
made fsl_guts_get_svr() static and hence use generic soc_device
infrastructure to check SoC revision.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: use memremap() to map RAM area used by PFE

RAM area used by PFE should be mapped using memremap() instead of
directly traslating physical addr to virtual. This will ensure proper
checks are done before the area is used.

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>

staging: fsl_ppfe/eth: remove 'fallback' argument from dev->ndo_select_queue()

To be consistent with upstream API change.

Signed-off-by: Li Yang <leoyang.li@nxp.com>

staging: fsl_ppfe/eth: prefix header search paths with $(srctree)/

Currently, the rules for configuring search paths in Kbuild have
changed: https://lkml.org/lkml/2019/5/13/37

This will lead the below error:

fatal error: pfe/pfe.h: No such file or directory

Fix it by adding $(srctree)/ prefix to the search paths.

Signed-off-by: Ting Liu <ting.liu@nxp.com>

staging: fsl_ppfe/eth: add pfe support to Kconfig and Makefile

Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
[ Aisheng: fix minor conflict due to removed VBOXSF_FS ]
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>

staging: fsl_ppfe/eth: Disable termination of CRC fwd.

LS1012A MAC PCS block has an erratum that is seen with specific PHY AR803x.
The issue is triggered by the (spec-compliant) operation of the AR803x PHY
on the LS1012A-FRWY board.Due to this, good FCS packet is reported as error
packet by MAC, so for these error packets FCS should be validated and
discard only real error packets in PFE Rx packet path.

Signed-off-by: Nagesh Koneti <koneti.nagesh@nxp.com>
Signed-off-by: Nagesh Koneti <“koneti.nagesh@nxp.com”>

net: ppfe: Cope with of_get_phy_mode() API change

Signed-off-by: Li Yang <leoyang.li@nxp.com>

staging: fsl_ppfe/eth: Enhance error checking in platform probe

Fix the kernel crash when MAC addr is not passed in dtb.

Signed-off-by: Anji Jagarlmudi <anji.jagarlmudi@nxp.com>

staging: fsl_ppfe/eth: reject unsupported coalescing params

Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.

Signed-off-by: Anji Jagarlmudi <anji.jagarlmudi@nxp.com>

staging: fsl_ppfe/eth:check "reg" property before pfe_get_gemac_if_properties()

It has been observed that the function pfe_get_gemac_if_properties() is
been called blindly for the next two child nodes. There might be some
cases where it may go wrong and that lead to missing interfaces.
with these changes it is ensured thats not the case.

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
Signed-off-by: Anji J <anji.jagarlmudi@nxp.com>

staging: fsl_ppfe/eth: "struct firmware" dereference is reduced in many functions

firmware structure's data variable is the actual elf data. It has been
dereferenced in multiple functions and this has been reduced.

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
Signed-off-by: Anji J <anji.jagarlmudi@nxp.com>

staging: fsl_ppfe/eth: LF-27 load pfe binaries from FDT

FDT prepared in uboot now has pfe firmware part of it.
These changes will read the firmware by default from it and tries to load
the elf into the PFE PEs. This help build the pfe driver pasrt of kernel.

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
Signed-off-by: Anji J <anji.jagarlmudi@nxp.com>

staging: fsl_ppfe/eth: proper handling for RGMII delay mode

The correct setting for the RGMII ports on LS1012ARDB is to
enable delay on both Tx and Rx. So the phy mode to be matched
is PHY_INTERFACE_MODE_RGMII_ID.

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
Signed-off-by: Anji Jagarlmudi <anji.jagarlmudi@nxp.com>

LF-1762-2 staging: fsl_ppfe: replace '---help---' in Kconfig files with 'help'

Update Kconfig to cope with upstream change
commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'").

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>

staging: fsl_ppfe/eth: Nesting level does not match indentation

corrected nesting level
LF-1661 and Coverity CID: 8879316

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>

staging: fsl_ppfe/eth: Initialized scalar variable

Proper initialization of scalar variable
LF-1657 and Coverity CID: 3335133

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>

staging: fsl_ppfe/eth: misspelt variable name

variable name corrected
LF-1656 and Coverity CID: 3335119

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>

staging: fsl_ppfe/eth: Avoiding out-of-bound writes

avoid out-of-bound writes with proper error handling
LF-1654, LF-1652 and Coverity CID: 3335106, 3335090

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>

staging: fsl_ppfe/eth: Initializing scalar variable

proper initialization of scalar variable.
LF-1653 and Coverity CID: 3335101

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>

staging: fsl_ppfe/eth: checking return value

proper checks added and handled for return value.
LF-1644 and Coverity CID: 241888

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>

staging: fsl_ppfe/eth: Avoid out-of-bound access

proper handling to avoid out-of-bound access
LF-1642, LF-1641 and Coverity CID: 240910, 240891

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>

staging: fsl_ppfe/eth: Avoiding out-of-bound writes

avoid out-of-bound writes with proper error handling
LF-1654, LF-1652 and Coverity CID: 3335106, 3335090

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>

staging: fsl_ppfe/eth: return value init in error case

proper err return in error case.
LF-1806 and Coverity CID: 10468592

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>

staging: fsl_ppfe/eth: Avoid recursion in header inclusion

Avoiding header inclusions that are not necessary and also that are
causing header inclusion recursion.

LF-2102 and Coverity CID: 240838

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>

staging: fsl_ppfe/eth: Avoiding return value overwrite

avoid return value overwrite at the end of function.
LF-2136, LF-2137 and Coverity CID: 8879341, 8879364

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>

staging: fsl_ppfe/eth: LF-27 enabling PFE firmware load from FDT

The macro, "LOAD_PFEFIRMWARE_FROM_FILESYSTEM" is been disabled to load
the firmware from FDT by default. Enabling the macro will load the
firmware from filesystem.

Also, the Makefile is now tuned to build pfe as per the config option

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>

staging: fsl_ppfe/eth: Ethtool stats correction for IEEE_rx_drop counter

Due to carrier extended bug the phy counter IEEE_rx_drop counter is
incremented some times and phy reports the packet has crc error.
Because of this PFE revalidates all the packets that are marked crc
error by phy. Now, the counter phy reports is till bogus and this
patch decrements the counter by pfe revalidated (and are crc ok)
counter amount.

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>

staging: fsl_ppfe/eth: PFE firmware load enhancements

PFE driver enhancements to load the PE firmware from filesystem
when the firmware is not found in FDT.

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>

staging: fsl_ppfe: deal with upstream API change of of_get_mac_address()

Uptream commit 83216e398 changed the of_get_mac_address() API, update
the user accordingly.

Signed-off-by: Li Yang <leoyang.li@nxp.com>

staging: fsl_ppfe: update coalesce setting uAPI usage

API changed since:
f3ccfda19319 ("ethtool: extend coalesce setting uAPI with CQE mode")

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>

staging: fsl_ppfe: Addressed build warnings

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>

staging: fsl_ppfe: Addressed build warnings

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>

staging: fsl_ppfe: Remove C45 check and related code in driver

The MDIO core will not pass a C45 request via the C22 API call any
more. So, removed the code. The old way of C45 muxed addresses is
removed from the upstream kernel after clear seperation of C45 and
C22.
Upstream kernel commit details for reference:
99d5fe9c7f3d net: mdio: Remove support for building C45 muxed addresses

Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>

staging: fsl_ppfe: update class_create() usage

Cope with API change:
1aaba11da9aa ("driver core: class: remove module * from class_create()")

Signed-off-by: Krishna Chaitanya Sakinam <chaitanya.sakinam@nxp.com>

LF-10777-2 staging: fsl_ppfe: remove unused pfe_eth_mdio_write_addr

Fix the following build warning:
drivers/staging/fsl_ppfe/pfe_eth.c:887:12: warning: ‘pfe_eth_mdio_write_addr’ defined but not used [-Wunused-function]
  887 | static int pfe_eth_mdio_write_addr(struct mii_bus *bus, int mii_id,

The only user of this API is MII_ADDR_C45 checking logic which
was removed since the commit 9d95b13bd084 ("staging: fsl_ppfe: Remove
C45 check and related code in driver"). So this API should be removed
together as no users anymore.

Fixes: 9d95b13bd084 ("staging: fsl_ppfe: Remove C45 check and related code in driver")
Reviewed-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>

LF-13827-2 net: pfe: fix Wmissing-prototypes build warnings

drivers/staging/fsl_ppfe/pfe_firmware.c:128:5: warning: no previous prototype for ‘pfe_load_elf’ [-Wmissing-prototypes]
  128 | int pfe_load_elf(int pe_mask, const u8 *fw, struct pfe *pfe)
      |     ^~~~~~~~~~~~
drivers/staging/fsl_ppfe/pfe_firmware.c:185:5: warning: no previous prototype for ‘get_firmware_in_fdt’ [-Wmissing-prototypes]
  185 | int get_firmware_in_fdt(const u8 **pe_fw, const char *name)
      |     ^~~~~~~~~~~~~~~~~~~

Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>

LF-13827-3 net/pfe: use $(src) instead of $(srctree)/$(src)

Cope with upstream change
b1992c3772e6 ("kbuild: use $(src) instead of $(srctree)/$(src) for source directory")

Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>

LF-13827-6 net: ppfe: update the usage of eventfd_signal

Cope with the API change since the commit
1808acc4fab2 ("eventfd: simplify eventfd_signal()")

Otherwise will meet the following build error:
drivers/staging/fsl_ppfe/pfe_cdev.c: In function ‘hif_us_isr’:
drivers/staging/fsl_ppfe/pfe_cdev.c:112:17: error: too many arguments to function ‘eventfd_signal’
  112 |                 eventfd_signal(trigger, 1);
      |                 ^~~~~~~~~~~~~~

Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>

LF-13827-7 net: pfe: Replace strlcpy() with strscpy() for many drivers

Cope with upstream change:
commit d26270061ae6 ("string: Remove strlcpy()")

e.g.
../drivers/i2c/busses/i2c-flexio.c: In function ‘imx_flexio_i2c_master_probe’:
../drivers/i2c/busses/i2c-flexio.c:683:9: error: implicit declaration of function ‘strlcpy’; did you mean ‘strncpy’? [-Werror=implicit-function-declaration]
  683 |         strlcpy(i2c_dev->adapter.name, dev_name(i2c_dev->dev),
      |         ^~~~~~~
      |         strncpy

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>

drivers: make all local platform_driver::remove() return void

0edb555a65d1 ("platform: Make platform_driver::remove() return void")

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
 .../devicetree/bindings/net/fsl_ppfe/pfe.txt  |  199 ++
 MAINTAINERS                                   |    8 +
 drivers/staging/Kconfig                       |    2 +
 drivers/staging/Makefile                      |    1 +
 drivers/staging/fsl_ppfe/Kconfig              |   21 +
 drivers/staging/fsl_ppfe/Makefile             |   20 +
 drivers/staging/fsl_ppfe/TODO                 |    2 +
 drivers/staging/fsl_ppfe/include/pfe/cbus.h   |   78 +
 .../staging/fsl_ppfe/include/pfe/cbus/bmu.h   |   55 +
 .../fsl_ppfe/include/pfe/cbus/class_csr.h     |  289 ++
 .../fsl_ppfe/include/pfe/cbus/emac_mtip.h     |  242 ++
 .../staging/fsl_ppfe/include/pfe/cbus/gpi.h   |   86 +
 .../staging/fsl_ppfe/include/pfe/cbus/hif.h   |  100 +
 .../fsl_ppfe/include/pfe/cbus/hif_nocpy.h     |   50 +
 .../fsl_ppfe/include/pfe/cbus/tmu_csr.h       |  168 ++
 .../fsl_ppfe/include/pfe/cbus/util_csr.h      |   61 +
 drivers/staging/fsl_ppfe/include/pfe/pfe.h    |  372 +++
 drivers/staging/fsl_ppfe/pfe_cdev.c           |  258 ++
 drivers/staging/fsl_ppfe/pfe_cdev.h           |   41 +
 drivers/staging/fsl_ppfe/pfe_ctrl.c           |  226 ++
 drivers/staging/fsl_ppfe/pfe_ctrl.h           |  100 +
 drivers/staging/fsl_ppfe/pfe_debugfs.c        |   99 +
 drivers/staging/fsl_ppfe/pfe_debugfs.h        |   13 +
 drivers/staging/fsl_ppfe/pfe_eth.c            | 2550 +++++++++++++++++
 drivers/staging/fsl_ppfe/pfe_eth.h            |  175 ++
 drivers/staging/fsl_ppfe/pfe_firmware.c       |  398 +++
 drivers/staging/fsl_ppfe/pfe_firmware.h       |   21 +
 drivers/staging/fsl_ppfe/pfe_hal.c            | 1517 ++++++++++
 drivers/staging/fsl_ppfe/pfe_hif.c            | 1063 +++++++
 drivers/staging/fsl_ppfe/pfe_hif.h            |  199 ++
 drivers/staging/fsl_ppfe/pfe_hif_lib.c        |  628 ++++
 drivers/staging/fsl_ppfe/pfe_hif_lib.h        |  229 ++
 drivers/staging/fsl_ppfe/pfe_hw.c             |  164 ++
 drivers/staging/fsl_ppfe/pfe_hw.h             |   15 +
 .../staging/fsl_ppfe/pfe_ls1012a_platform.c   |  381 +++
 drivers/staging/fsl_ppfe/pfe_mod.c            |  158 +
 drivers/staging/fsl_ppfe/pfe_mod.h            |  103 +
 drivers/staging/fsl_ppfe/pfe_perfmon.h        |   26 +
 drivers/staging/fsl_ppfe/pfe_sysfs.c          |  840 ++++++
 drivers/staging/fsl_ppfe/pfe_sysfs.h          |   17 +
 40 files changed, 10975 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt
 create mode 100644 drivers/staging/fsl_ppfe/Kconfig
 create mode 100644 drivers/staging/fsl_ppfe/Makefile
 create mode 100644 drivers/staging/fsl_ppfe/TODO
 create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus.h
 create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/bmu.h
 create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/class_csr.h
 create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/emac_mtip.h
 create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/gpi.h
 create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/hif.h
 create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/hif_nocpy.h
 create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/tmu_csr.h
 create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/util_csr.h
 create mode 100644 drivers/staging/fsl_ppfe/include/pfe/pfe.h
 create mode 100644 drivers/staging/fsl_ppfe/pfe_cdev.c
 create mode 100644 drivers/staging/fsl_ppfe/pfe_cdev.h
 create mode 100644 drivers/staging/fsl_ppfe/pfe_ctrl.c
 create mode 100644 drivers/staging/fsl_ppfe/pfe_ctrl.h
 create mode 100644 drivers/staging/fsl_ppfe/pfe_debugfs.c
 create mode 100644 drivers/staging/fsl_ppfe/pfe_debugfs.h
 create mode 100644 drivers/staging/fsl_ppfe/pfe_eth.c
 create mode 100644 drivers/staging/fsl_ppfe/pfe_eth.h
 create mode 100644 drivers/staging/fsl_ppfe/pfe_firmware.c
 create mode 100644 drivers/staging/fsl_ppfe/pfe_firmware.h
 create mode 100644 drivers/staging/fsl_ppfe/pfe_hal.c
 create mode 100644 drivers/staging/fsl_ppfe/pfe_hif.c
 create mode 100644 drivers/staging/fsl_ppfe/pfe_hif.h
 create mode 100644 drivers/staging/fsl_ppfe/pfe_hif_lib.c
 create mode 100644 drivers/staging/fsl_ppfe/pfe_hif_lib.h
 create mode 100644 drivers/staging/fsl_ppfe/pfe_hw.c
 create mode 100644 drivers/staging/fsl_ppfe/pfe_hw.h
 create mode 100644 drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
 create mode 100644 drivers/staging/fsl_ppfe/pfe_mod.c
 create mode 100644 drivers/staging/fsl_ppfe/pfe_mod.h
 create mode 100644 drivers/staging/fsl_ppfe/pfe_perfmon.h
 create mode 100644 drivers/staging/fsl_ppfe/pfe_sysfs.c
 create mode 100644 drivers/staging/fsl_ppfe/pfe_sysfs.h

--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt
@@ -0,0 +1,199 @@
+=============================================================================
+NXP Programmable Packet Forwarding Engine Device Bindings
+
+CONTENTS
+  - PFE Node
+  - Ethernet Node
+
+=============================================================================
+PFE Node
+
+DESCRIPTION
+
+PFE Node has all the properties associated with Packet Forwarding Engine block.
+
+PROPERTIES
+
+- compatible
+		Usage: required
+		Value type: <stringlist>
+		Definition: Must include "fsl,pfe"
+
+- reg
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property.
+		Specifies the offset of the following registers:
+		- PFE configuration registers
+		- DDR memory used by PFE
+
+- fsl,pfe-num-interfaces
+		Usage: required
+		Value type: <u32>
+		Definition: Must be present. Value can be either one or two.
+
+- interrupts
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: Three interrupts are specified in this property.
+		- HIF interrupt
+		- HIF NO COPY interrupt
+		- Wake On LAN interrupt
+
+- interrupt-names
+		Usage: required
+		Value type: <stringlist>
+		Definition: Following strings are defined for the 3 interrupts.
+		"pfe_hif" - HIF interrupt
+		"pfe_hif_nocpy" - HIF NO COPY interrupt
+		"pfe_wol" - Wake On LAN interrupt
+
+- memory-region
+		Usage: required
+		Value type: <phandle>
+		Definition: phandle to a node describing reserved memory used by pfe.
+		Refer:- Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+
+- fsl,pfe-scfg
+		Usage: required
+		Value type: <phandle>
+		Definition: phandle for scfg.
+
+- fsl,rcpm-wakeup
+		Usage: required
+		Value type: <phandle>
+		Definition: phandle for rcpm.
+
+- clocks
+		Usage: required
+		Value type: <phandle>
+		Definition: phandle for clockgen.
+
+- clock-names
+		Usage: required
+		Value type: <string>
+		Definition: phandle for clock name.
+
+EXAMPLE
+
+pfe: pfe@04000000 {
+	compatible = "fsl,pfe";
+	reg =   <0x0 0x04000000 0x0 0xc00000>,	/* AXI 16M */
+		<0x0 0x83400000 0x0 0xc00000>;  /* PFE DDR 12M */
+	reg-names = "pfe", "pfe-ddr";
+	fsl,pfe-num-interfaces = <0x2>;
+	interrupts = <0 172 0x4>,    /* HIF interrupt */
+		     <0 173 0x4>,    /*HIF_NOCPY interrupt */
+		     <0 174 0x4>;    /* WoL interrupt */
+	interrupt-names = "pfe_hif", "pfe_hif_nocpy", "pfe_wol";
+	memory-region = <&pfe_reserved>;
+	fsl,pfe-scfg = <&scfg 0>;
+	fsl,rcpm-wakeup = <&rcpm 0xf0000020>;
+	clocks = <&clockgen 4 0>;
+	clock-names = "pfe";
+
+	status = "okay";
+	pfe_mac0: ethernet@0 {
+	};
+
+	pfe_mac1: ethernet@1 {
+	};
+};
+
+=============================================================================
+Ethernet Node
+
+DESCRIPTION
+
+Ethernet Node has all the properties associated with PFE used by platforms to
+connect to PHY:
+
+PROPERTIES
+
+- compatible
+		Usage: required
+		Value type: <stringlist>
+		Definition: Must include "fsl,pfe-gemac-port"
+
+- reg
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property.
+		Specifies the gemacid of the interface.
+
+- fsl,gemac-bus-id
+		Usage: required
+		Value type: <u32>
+		Definition: Must be present. Value should be the id of the bus
+		connected to gemac.
+
+- fsl,gemac-phy-id (deprecated binding)
+               Usage: required
+               Value type: <u32>
+               Definition: This binding shouldn't be used with new platforms.
+	       Must be present. Value should be the id of the phy
+               connected to gemac.
+
+- fsl,mdio-mux-val
+		Usage: required
+		Value type: <u32>
+		Definition: Must be present. Value can be either 0 or 2 or 3.
+		This value is used to configure the mux to enable mdio.
+
+- phy-mode
+		Usage: required
+		Value type: <string>
+		Definition: Must include "sgmii"
+
+- fsl,pfe-phy-if-flags (deprecated binding)
+               Usage: required
+               Value type: <u32>
+               Definition: This binding shouldn't be used with new platforms.
+               Must be present. Value should be 0 by default.
+               If there is not phy connected, this need to be 1.
+
+- phy-handle
+		Usage: optional
+		Value type: <phandle>
+		Definition: phandle to the PHY device connected to this device.
+
+- mdio : A required subnode which specifies the mdio bus in the PFE and used as
+a container for phy nodes according to ../phy.txt.
+
+EXAMPLE
+
+ethernet@0 {
+	compatible = "fsl,pfe-gemac-port";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x0>;	/* GEM_ID */
+	fsl,gemac-bus-id = <0x0>;	/* BUS_ID */
+	fsl,mdio-mux-val = <0x0>;
+	phy-mode = "sgmii";
+	phy-handle = <&sgmii_phy1>;
+};
+
+
+ethernet@1 {
+	compatible = "fsl,pfe-gemac-port";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x1>;	/* GEM_ID */
+	fsl,gemac-bus-id = <0x1>;	/* BUS_ID */
+	fsl,mdio-mux-val = <0x0>;
+	phy-mode = "sgmii";
+	phy-handle = <&sgmii_phy2>;
+};
+
+mdio@0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	sgmii_phy1: ethernet-phy@2 {
+		reg = <0x2>;
+	};
+
+	sgmii_phy2: ethernet-phy@1 {
+		reg = <0x1>;
+	};
+};
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9107,6 +9107,14 @@ F:	drivers/ptp/ptp_qoriq.c
 F:	drivers/ptp/ptp_qoriq_debugfs.c
 F:	include/linux/fsl/ptp_qoriq.h
 
+FREESCALE QORIQ PPFE ETHERNET DRIVER
+M:	Anji Jagarlmudi <anji.jagarlmudi@nxp.com>
+M:	Calvin Johnson <calvin.johnson@nxp.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/staging/fsl_ppfe
+F:	Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt
+
 FREESCALE QUAD SPI DRIVER
 M:	Han Xu <han.xu@nxp.com>
 L:	linux-spi@vger.kernel.org
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -64,4 +64,6 @@ source "drivers/staging/fieldbus/Kconfig
 
 source "drivers/staging/vme_user/Kconfig"
 
+source "drivers/staging/fsl_ppfe/Kconfig"
+
 endif # STAGING
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_GREYBUS)		+= greybus/
 obj-$(CONFIG_BCM2835_VCHIQ)	+= vc04_services/
 obj-$(CONFIG_XIL_AXIS_FIFO)	+= axis-fifo/
 obj-$(CONFIG_FIELDBUS_DEV)     += fieldbus/
+obj-$(CONFIG_FSL_PPFE)		+= fsl_ppfe/
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/Kconfig
@@ -0,0 +1,21 @@
+#
+# Freescale Programmable Packet Forwarding Engine driver
+#
+config FSL_PPFE
+	tristate "Freescale PPFE Driver"
+	select FSL_GUTS
+	default n
+	help
+	Freescale LS1012A SoC has a Programmable Packet Forwarding Engine.
+	It provides two high performance ethernet interfaces.
+	This driver initializes, programs and controls the PPFE.
+	Use this driver to enable network connectivity on LS1012A platforms.
+
+if FSL_PPFE
+
+config FSL_PPFE_UTIL_DISABLED
+	bool "Disable PPFE UTIL Processor Engine"
+	help
+	UTIL PE has to be enabled only if required.
+
+endif # FSL_PPFE
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/Makefile
@@ -0,0 +1,20 @@
+#
+# Makefile for Freesecale PPFE driver
+#
+
+ccflags-y +=  -I $(src)/include  -I $(src)
+
+obj-$(CONFIG_FSL_PPFE) += pfe.o
+
+pfe-y += pfe_mod.o \
+	pfe_hw.o \
+	pfe_firmware.o \
+	pfe_ctrl.o \
+	pfe_hif.o \
+	pfe_hif_lib.o\
+	pfe_eth.o \
+	pfe_sysfs.o \
+	pfe_debugfs.o \
+	pfe_ls1012a_platform.o \
+	pfe_hal.o \
+	pfe_cdev.o
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/TODO
@@ -0,0 +1,2 @@
+TODO:
+	- provide pfe pe monitoring support
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _CBUS_H_
+#define _CBUS_H_
+
+#define EMAC1_BASE_ADDR	(CBUS_BASE_ADDR + 0x200000)
+#define EGPI1_BASE_ADDR	(CBUS_BASE_ADDR + 0x210000)
+#define EMAC2_BASE_ADDR	(CBUS_BASE_ADDR + 0x220000)
+#define EGPI2_BASE_ADDR	(CBUS_BASE_ADDR + 0x230000)
+#define BMU1_BASE_ADDR	(CBUS_BASE_ADDR + 0x240000)
+#define BMU2_BASE_ADDR	(CBUS_BASE_ADDR + 0x250000)
+#define ARB_BASE_ADDR	(CBUS_BASE_ADDR + 0x260000)
+#define DDR_CONFIG_BASE_ADDR	(CBUS_BASE_ADDR + 0x270000)
+#define HIF_BASE_ADDR	(CBUS_BASE_ADDR + 0x280000)
+#define HGPI_BASE_ADDR	(CBUS_BASE_ADDR + 0x290000)
+#define LMEM_BASE_ADDR	(CBUS_BASE_ADDR + 0x300000)
+#define LMEM_SIZE	0x10000
+#define LMEM_END	(LMEM_BASE_ADDR + LMEM_SIZE)
+#define TMU_CSR_BASE_ADDR	(CBUS_BASE_ADDR + 0x310000)
+#define CLASS_CSR_BASE_ADDR	(CBUS_BASE_ADDR + 0x320000)
+#define HIF_NOCPY_BASE_ADDR	(CBUS_BASE_ADDR + 0x350000)
+#define UTIL_CSR_BASE_ADDR	(CBUS_BASE_ADDR + 0x360000)
+#define CBUS_GPT_BASE_ADDR	(CBUS_BASE_ADDR + 0x370000)
+
+/*
+ * defgroup XXX_MEM_ACCESS_ADDR PE memory access through CSR
+ * XXX_MEM_ACCESS_ADDR register bit definitions.
+ */
+#define PE_MEM_ACCESS_WRITE	BIT(31)	/* Internal Memory Write. */
+#define PE_MEM_ACCESS_IMEM	BIT(15)
+#define PE_MEM_ACCESS_DMEM	BIT(16)
+
+/* Byte Enables of the Internal memory access. These are interpred in BE */
+#define PE_MEM_ACCESS_BYTE_ENABLE(offset, size)	\
+	({ typeof(size) size_ = (size);		\
+	(((BIT(size_) - 1) << (4 - (offset) - (size_))) & 0xf) << 24; })
+
+#include "cbus/emac_mtip.h"
+#include "cbus/gpi.h"
+#include "cbus/bmu.h"
+#include "cbus/hif.h"
+#include "cbus/tmu_csr.h"
+#include "cbus/class_csr.h"
+#include "cbus/hif_nocpy.h"
+#include "cbus/util_csr.h"
+
+/* PFE cores states */
+#define CORE_DISABLE	0x00000000
+#define CORE_ENABLE	0x00000001
+#define CORE_SW_RESET	0x00000002
+
+/* LMEM defines */
+#define LMEM_HDR_SIZE	0x0010
+#define LMEM_BUF_SIZE_LN2	0x7
+#define LMEM_BUF_SIZE	BIT(LMEM_BUF_SIZE_LN2)
+
+/* DDR defines */
+#define DDR_HDR_SIZE	0x0100
+#define DDR_BUF_SIZE_LN2	0xb
+#define DDR_BUF_SIZE	BIT(DDR_BUF_SIZE_LN2)
+
+#endif /* _CBUS_H_ */
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/bmu.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _BMU_H_
+#define _BMU_H_
+
+#define BMU_VERSION	0x000
+#define BMU_CTRL	0x004
+#define BMU_UCAST_CONFIG	0x008
+#define BMU_UCAST_BASE_ADDR	0x00c
+#define BMU_BUF_SIZE	0x010
+#define BMU_BUF_CNT	0x014
+#define BMU_THRES	0x018
+#define BMU_INT_SRC	0x020
+#define BMU_INT_ENABLE	0x024
+#define BMU_ALLOC_CTRL	0x030
+#define BMU_FREE_CTRL	0x034
+#define BMU_FREE_ERR_ADDR	0x038
+#define BMU_CURR_BUF_CNT	0x03c
+#define BMU_MCAST_CNT	0x040
+#define BMU_MCAST_ALLOC_CTRL	0x044
+#define BMU_REM_BUF_CNT	0x048
+#define BMU_LOW_WATERMARK	0x050
+#define BMU_HIGH_WATERMARK	0x054
+#define BMU_INT_MEM_ACCESS	0x100
+
+struct BMU_CFG {
+	unsigned long baseaddr;
+	u32 count;
+	u32 size;
+	u32 low_watermark;
+	u32 high_watermark;
+};
+
+#define BMU1_BUF_SIZE	LMEM_BUF_SIZE_LN2
+#define BMU2_BUF_SIZE	DDR_BUF_SIZE_LN2
+
+#define BMU2_MCAST_ALLOC_CTRL	(BMU2_BASE_ADDR + BMU_MCAST_ALLOC_CTRL)
+
+#endif /* _BMU_H_ */
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/class_csr.h
@@ -0,0 +1,289 @@
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _CLASS_CSR_H_
+#define _CLASS_CSR_H_
+
+/* @file class_csr.h.
+ * class_csr - block containing all the classifier control and status register.
+ * Mapped on CBUS and accessible from all PE's and ARM.
+ */
+#define CLASS_VERSION	(CLASS_CSR_BASE_ADDR + 0x000)
+#define CLASS_TX_CTRL	(CLASS_CSR_BASE_ADDR + 0x004)
+#define CLASS_INQ_PKTPTR	(CLASS_CSR_BASE_ADDR + 0x010)
+
+/* (ddr_hdr_size[24:16], lmem_hdr_size[5:0]) */
+#define CLASS_HDR_SIZE	(CLASS_CSR_BASE_ADDR + 0x014)
+
+/* LMEM header size for the Classifier block.\ Data in the LMEM
+ * is written from this offset.
+ */
+#define CLASS_HDR_SIZE_LMEM(off)	((off) & 0x3f)
+
+/* DDR header size for the Classifier block.\ Data in the DDR
+ * is written from this offset.
+ */
+#define CLASS_HDR_SIZE_DDR(off)	(((off) & 0x1ff) << 16)
+
+#define CLASS_PE0_QB_DM_ADDR0	(CLASS_CSR_BASE_ADDR + 0x020)
+
+/* DMEM address of first [15:0] and second [31:16] buffers on QB side. */
+#define CLASS_PE0_QB_DM_ADDR1	(CLASS_CSR_BASE_ADDR + 0x024)
+
+/* DMEM address of third [15:0] and fourth [31:16] buffers on QB side. */
+#define CLASS_PE0_RO_DM_ADDR0	(CLASS_CSR_BASE_ADDR + 0x060)
+
+/* DMEM address of first [15:0] and second [31:16] buffers on RO side. */
+#define CLASS_PE0_RO_DM_ADDR1	(CLASS_CSR_BASE_ADDR + 0x064)
+
+/* DMEM address of third [15:0] and fourth [31:16] buffers on RO side. */
+
+/* @name Class PE memory access. Allows external PE's and HOST to
+ * read/write PMEM/DMEM memory ranges for each classifier PE.
+ */
+/* {sr_pe_mem_cmd[31], csr_pe_mem_wren[27:24], csr_pe_mem_addr[23:0]},
+ * See \ref XXX_MEM_ACCESS_ADDR for details.
+ */
+#define CLASS_MEM_ACCESS_ADDR	(CLASS_CSR_BASE_ADDR + 0x100)
+
+/* Internal Memory Access Write Data [31:0] */
+#define CLASS_MEM_ACCESS_WDATA	(CLASS_CSR_BASE_ADDR + 0x104)
+
+/* Internal Memory Access Read Data [31:0] */
+#define CLASS_MEM_ACCESS_RDATA	(CLASS_CSR_BASE_ADDR + 0x108)
+#define CLASS_TM_INQ_ADDR	(CLASS_CSR_BASE_ADDR + 0x114)
+#define CLASS_PE_STATUS	(CLASS_CSR_BASE_ADDR + 0x118)
+
+#define CLASS_PHY1_RX_PKTS	(CLASS_CSR_BASE_ADDR + 0x11c)
+#define CLASS_PHY1_TX_PKTS	(CLASS_CSR_BASE_ADDR + 0x120)
+#define CLASS_PHY1_LP_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x124)
+#define CLASS_PHY1_INTF_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x128)
+#define CLASS_PHY1_INTF_MATCH_PKTS	(CLASS_CSR_BASE_ADDR + 0x12c)
+#define CLASS_PHY1_L3_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x130)
+#define CLASS_PHY1_V4_PKTS	(CLASS_CSR_BASE_ADDR + 0x134)
+#define CLASS_PHY1_V6_PKTS	(CLASS_CSR_BASE_ADDR + 0x138)
+#define CLASS_PHY1_CHKSUM_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x13c)
+#define CLASS_PHY1_TTL_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x140)
+#define CLASS_PHY2_RX_PKTS	(CLASS_CSR_BASE_ADDR + 0x144)
+#define CLASS_PHY2_TX_PKTS	(CLASS_CSR_BASE_ADDR + 0x148)
+#define CLASS_PHY2_LP_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x14c)
+#define CLASS_PHY2_INTF_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x150)
+#define CLASS_PHY2_INTF_MATCH_PKTS	(CLASS_CSR_BASE_ADDR + 0x154)
+#define CLASS_PHY2_L3_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x158)
+#define CLASS_PHY2_V4_PKTS	(CLASS_CSR_BASE_ADDR + 0x15c)
+#define CLASS_PHY2_V6_PKTS	(CLASS_CSR_BASE_ADDR + 0x160)
+#define CLASS_PHY2_CHKSUM_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x164)
+#define CLASS_PHY2_TTL_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x168)
+#define CLASS_PHY3_RX_PKTS	(CLASS_CSR_BASE_ADDR + 0x16c)
+#define CLASS_PHY3_TX_PKTS	(CLASS_CSR_BASE_ADDR + 0x170)
+#define CLASS_PHY3_LP_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x174)
+#define CLASS_PHY3_INTF_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x178)
+#define CLASS_PHY3_INTF_MATCH_PKTS	(CLASS_CSR_BASE_ADDR + 0x17c)
+#define CLASS_PHY3_L3_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x180)
+#define CLASS_PHY3_V4_PKTS	(CLASS_CSR_BASE_ADDR + 0x184)
+#define CLASS_PHY3_V6_PKTS	(CLASS_CSR_BASE_ADDR + 0x188)
+#define CLASS_PHY3_CHKSUM_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x18c)
+#define CLASS_PHY3_TTL_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x190)
+#define CLASS_PHY1_ICMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x194)
+#define CLASS_PHY1_IGMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x198)
+#define CLASS_PHY1_TCP_PKTS	(CLASS_CSR_BASE_ADDR + 0x19c)
+#define CLASS_PHY1_UDP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1a0)
+#define CLASS_PHY2_ICMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1a4)
+#define CLASS_PHY2_IGMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1a8)
+#define CLASS_PHY2_TCP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1ac)
+#define CLASS_PHY2_UDP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1b0)
+#define CLASS_PHY3_ICMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1b4)
+#define CLASS_PHY3_IGMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1b8)
+#define CLASS_PHY3_TCP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1bc)
+#define CLASS_PHY3_UDP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1c0)
+#define CLASS_PHY4_ICMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1c4)
+#define CLASS_PHY4_IGMP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1c8)
+#define CLASS_PHY4_TCP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1cc)
+#define CLASS_PHY4_UDP_PKTS	(CLASS_CSR_BASE_ADDR + 0x1d0)
+#define CLASS_PHY4_RX_PKTS	(CLASS_CSR_BASE_ADDR + 0x1d4)
+#define CLASS_PHY4_TX_PKTS	(CLASS_CSR_BASE_ADDR + 0x1d8)
+#define CLASS_PHY4_LP_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x1dc)
+#define CLASS_PHY4_INTF_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x1e0)
+#define CLASS_PHY4_INTF_MATCH_PKTS	(CLASS_CSR_BASE_ADDR + 0x1e4)
+#define CLASS_PHY4_L3_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x1e8)
+#define CLASS_PHY4_V4_PKTS	(CLASS_CSR_BASE_ADDR + 0x1ec)
+#define CLASS_PHY4_V6_PKTS	(CLASS_CSR_BASE_ADDR + 0x1f0)
+#define CLASS_PHY4_CHKSUM_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x1f4)
+#define CLASS_PHY4_TTL_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x1f8)
+
+#define CLASS_PE_SYS_CLK_RATIO	(CLASS_CSR_BASE_ADDR + 0x200)
+#define CLASS_AFULL_THRES	(CLASS_CSR_BASE_ADDR + 0x204)
+#define CLASS_GAP_BETWEEN_READS	(CLASS_CSR_BASE_ADDR + 0x208)
+#define CLASS_MAX_BUF_CNT	(CLASS_CSR_BASE_ADDR + 0x20c)
+#define CLASS_TSQ_FIFO_THRES	(CLASS_CSR_BASE_ADDR + 0x210)
+#define CLASS_TSQ_MAX_CNT	(CLASS_CSR_BASE_ADDR + 0x214)
+#define CLASS_IRAM_DATA_0	(CLASS_CSR_BASE_ADDR + 0x218)
+#define CLASS_IRAM_DATA_1	(CLASS_CSR_BASE_ADDR + 0x21c)
+#define CLASS_IRAM_DATA_2	(CLASS_CSR_BASE_ADDR + 0x220)
+#define CLASS_IRAM_DATA_3	(CLASS_CSR_BASE_ADDR + 0x224)
+
+#define CLASS_BUS_ACCESS_ADDR	(CLASS_CSR_BASE_ADDR + 0x228)
+
+#define CLASS_BUS_ACCESS_WDATA	(CLASS_CSR_BASE_ADDR + 0x22c)
+#define CLASS_BUS_ACCESS_RDATA	(CLASS_CSR_BASE_ADDR + 0x230)
+
+/* (route_entry_size[9:0], route_hash_size[23:16]
+ * (this is actually ln2(size)))
+ */
+#define CLASS_ROUTE_HASH_ENTRY_SIZE	(CLASS_CSR_BASE_ADDR + 0x234)
+
+#define CLASS_ROUTE_ENTRY_SIZE(size)	 ((size) & 0x1ff)
+#define CLASS_ROUTE_HASH_SIZE(hash_bits) (((hash_bits) & 0xff) << 16)
+
+#define CLASS_ROUTE_TABLE_BASE	(CLASS_CSR_BASE_ADDR + 0x238)
+
+#define CLASS_ROUTE_MULTI	(CLASS_CSR_BASE_ADDR + 0x23c)
+#define CLASS_SMEM_OFFSET	(CLASS_CSR_BASE_ADDR + 0x240)
+#define CLASS_LMEM_BUF_SIZE	(CLASS_CSR_BASE_ADDR + 0x244)
+#define CLASS_VLAN_ID	(CLASS_CSR_BASE_ADDR + 0x248)
+#define CLASS_BMU1_BUF_FREE	(CLASS_CSR_BASE_ADDR + 0x24c)
+#define CLASS_USE_TMU_INQ	(CLASS_CSR_BASE_ADDR + 0x250)
+#define CLASS_VLAN_ID1	(CLASS_CSR_BASE_ADDR + 0x254)
+
+#define CLASS_BUS_ACCESS_BASE	(CLASS_CSR_BASE_ADDR + 0x258)
+#define CLASS_BUS_ACCESS_BASE_MASK	(0xFF000000)
+/* bit 31:24 of PE peripheral address are stored in CLASS_BUS_ACCESS_BASE */
+
+#define CLASS_HIF_PARSE	(CLASS_CSR_BASE_ADDR + 0x25c)
+
+#define CLASS_HOST_PE0_GP	(CLASS_CSR_BASE_ADDR + 0x260)
+#define CLASS_PE0_GP	(CLASS_CSR_BASE_ADDR + 0x264)
+#define CLASS_HOST_PE1_GP	(CLASS_CSR_BASE_ADDR + 0x268)
+#define CLASS_PE1_GP	(CLASS_CSR_BASE_ADDR + 0x26c)
+#define CLASS_HOST_PE2_GP	(CLASS_CSR_BASE_ADDR + 0x270)
+#define CLASS_PE2_GP	(CLASS_CSR_BASE_ADDR + 0x274)
+#define CLASS_HOST_PE3_GP	(CLASS_CSR_BASE_ADDR + 0x278)
+#define CLASS_PE3_GP	(CLASS_CSR_BASE_ADDR + 0x27c)
+#define CLASS_HOST_PE4_GP	(CLASS_CSR_BASE_ADDR + 0x280)
+#define CLASS_PE4_GP	(CLASS_CSR_BASE_ADDR + 0x284)
+#define CLASS_HOST_PE5_GP	(CLASS_CSR_BASE_ADDR + 0x288)
+#define CLASS_PE5_GP	(CLASS_CSR_BASE_ADDR + 0x28c)
+
+#define CLASS_PE_INT_SRC	(CLASS_CSR_BASE_ADDR + 0x290)
+#define CLASS_PE_INT_ENABLE	(CLASS_CSR_BASE_ADDR + 0x294)
+
+#define CLASS_TPID0_TPID1	(CLASS_CSR_BASE_ADDR + 0x298)
+#define CLASS_TPID2	(CLASS_CSR_BASE_ADDR + 0x29c)
+
+#define CLASS_L4_CHKSUM_ADDR	(CLASS_CSR_BASE_ADDR + 0x2a0)
+
+#define CLASS_PE0_DEBUG	(CLASS_CSR_BASE_ADDR + 0x2a4)
+#define CLASS_PE1_DEBUG	(CLASS_CSR_BASE_ADDR + 0x2a8)
+#define CLASS_PE2_DEBUG	(CLASS_CSR_BASE_ADDR + 0x2ac)
+#define CLASS_PE3_DEBUG	(CLASS_CSR_BASE_ADDR + 0x2b0)
+#define CLASS_PE4_DEBUG	(CLASS_CSR_BASE_ADDR + 0x2b4)
+#define CLASS_PE5_DEBUG	(CLASS_CSR_BASE_ADDR + 0x2b8)
+
+#define CLASS_STATE	(CLASS_CSR_BASE_ADDR + 0x2bc)
+
+/* CLASS defines */
+#define CLASS_PBUF_SIZE	0x100	/* Fixed by hardware */
+#define CLASS_PBUF_HEADER_OFFSET	0x80	/* Can be configured */
+
+/* Can be configured */
+#define CLASS_PBUF0_BASE_ADDR	0x000
+/* Can be configured */
+#define CLASS_PBUF1_BASE_ADDR	(CLASS_PBUF0_BASE_ADDR + CLASS_PBUF_SIZE)
+/* Can be configured */
+#define CLASS_PBUF2_BASE_ADDR	(CLASS_PBUF1_BASE_ADDR + CLASS_PBUF_SIZE)
+/* Can be configured */
+#define CLASS_PBUF3_BASE_ADDR	(CLASS_PBUF2_BASE_ADDR + CLASS_PBUF_SIZE)
+
+#define CLASS_PBUF0_HEADER_BASE_ADDR	(CLASS_PBUF0_BASE_ADDR + \
+						CLASS_PBUF_HEADER_OFFSET)
+#define CLASS_PBUF1_HEADER_BASE_ADDR	(CLASS_PBUF1_BASE_ADDR + \
+						CLASS_PBUF_HEADER_OFFSET)
+#define CLASS_PBUF2_HEADER_BASE_ADDR	(CLASS_PBUF2_BASE_ADDR + \
+						CLASS_PBUF_HEADER_OFFSET)
+#define CLASS_PBUF3_HEADER_BASE_ADDR	(CLASS_PBUF3_BASE_ADDR + \
+						CLASS_PBUF_HEADER_OFFSET)
+
+#define CLASS_PE0_RO_DM_ADDR0_VAL	((CLASS_PBUF1_BASE_ADDR << 16) | \
+						CLASS_PBUF0_BASE_ADDR)
+#define CLASS_PE0_RO_DM_ADDR1_VAL	((CLASS_PBUF3_BASE_ADDR << 16) | \
+						CLASS_PBUF2_BASE_ADDR)
+
+#define CLASS_PE0_QB_DM_ADDR0_VAL	((CLASS_PBUF1_HEADER_BASE_ADDR << 16) |\
+						CLASS_PBUF0_HEADER_BASE_ADDR)
+#define CLASS_PE0_QB_DM_ADDR1_VAL	((CLASS_PBUF3_HEADER_BASE_ADDR << 16) |\
+						CLASS_PBUF2_HEADER_BASE_ADDR)
+
+#define CLASS_ROUTE_SIZE	128
+#define CLASS_MAX_ROUTE_SIZE	256
+#define CLASS_ROUTE_HASH_BITS	20
+#define CLASS_ROUTE_HASH_MASK	(BIT(CLASS_ROUTE_HASH_BITS) - 1)
+
+/* Can be configured */
+#define	CLASS_ROUTE0_BASE_ADDR	0x400
+/* Can be configured */
+#define CLASS_ROUTE1_BASE_ADDR	(CLASS_ROUTE0_BASE_ADDR + CLASS_ROUTE_SIZE)
+/* Can be configured */
+#define CLASS_ROUTE2_BASE_ADDR	(CLASS_ROUTE1_BASE_ADDR + CLASS_ROUTE_SIZE)
+/* Can be configured */
+#define CLASS_ROUTE3_BASE_ADDR	(CLASS_ROUTE2_BASE_ADDR + CLASS_ROUTE_SIZE)
+
+#define CLASS_SA_SIZE	128
+#define CLASS_IPSEC_SA0_BASE_ADDR	0x600
+/* not used */
+#define CLASS_IPSEC_SA1_BASE_ADDR  (CLASS_IPSEC_SA0_BASE_ADDR + CLASS_SA_SIZE)
+/* not used */
+#define CLASS_IPSEC_SA2_BASE_ADDR  (CLASS_IPSEC_SA1_BASE_ADDR + CLASS_SA_SIZE)
+/* not used */
+#define CLASS_IPSEC_SA3_BASE_ADDR  (CLASS_IPSEC_SA2_BASE_ADDR + CLASS_SA_SIZE)
+
+/* generic purpose free dmem buffer, last portion of 2K dmem pbuf */
+#define CLASS_GP_DMEM_BUF_SIZE	(2048 - (CLASS_PBUF_SIZE * 4) - \
+				(CLASS_ROUTE_SIZE * 4) - (CLASS_SA_SIZE))
+#define CLASS_GP_DMEM_BUF	((void *)(CLASS_IPSEC_SA0_BASE_ADDR + \
+					CLASS_SA_SIZE))
+
+#define TWO_LEVEL_ROUTE		BIT(0)
+#define PHYNO_IN_HASH		BIT(1)
+#define HW_ROUTE_FETCH		BIT(3)
+#define HW_BRIDGE_FETCH		BIT(5)
+#define IP_ALIGNED		BIT(6)
+#define ARC_HIT_CHECK_EN	BIT(7)
+#define CLASS_TOE		BIT(11)
+#define HASH_NORMAL		(0 << 12)
+#define HASH_CRC_PORT		BIT(12)
+#define HASH_CRC_IP		(2 << 12)
+#define HASH_CRC_PORT_IP	(3 << 12)
+#define QB2BUS_LE		BIT(15)
+
+#define TCP_CHKSUM_DROP		BIT(0)
+#define UDP_CHKSUM_DROP		BIT(1)
+#define IPV4_CHKSUM_DROP	BIT(9)
+
+/*CLASS_HIF_PARSE bits*/
+#define HIF_PKT_CLASS_EN	BIT(0)
+#define HIF_PKT_OFFSET(ofst)	(((ofst) & 0xF) << 1)
+
+struct class_cfg {
+	u32 toe_mode;
+	unsigned long route_table_baseaddr;
+	u32 route_table_hash_bits;
+	u32 pe_sys_clk_ratio;
+	u32 resume;
+};
+
+#endif /* _CLASS_CSR_H_ */
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/emac_mtip.h
@@ -0,0 +1,242 @@
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _EMAC_H_
+#define _EMAC_H_
+
+#include <linux/ethtool.h>
+
+#define EMAC_IEVENT_REG		0x004
+#define EMAC_IMASK_REG		0x008
+#define EMAC_R_DES_ACTIVE_REG	0x010
+#define EMAC_X_DES_ACTIVE_REG	0x014
+#define EMAC_ECNTRL_REG		0x024
+#define EMAC_MII_DATA_REG	0x040
+#define EMAC_MII_CTRL_REG	0x044
+#define EMAC_MIB_CTRL_STS_REG	0x064
+#define EMAC_RCNTRL_REG		0x084
+#define EMAC_TCNTRL_REG		0x0C4
+#define EMAC_PHY_ADDR_LOW	0x0E4
+#define EMAC_PHY_ADDR_HIGH	0x0E8
+#define EMAC_GAUR		0x120
+#define EMAC_GALR		0x124
+#define EMAC_TFWR_STR_FWD	0x144
+#define EMAC_RX_SECTION_FULL	0x190
+#define EMAC_RX_SECTION_EMPTY	0x194
+#define EMAC_TX_SECTION_EMPTY	0x1A0
+#define EMAC_TRUNC_FL		0x1B0
+
+#define RMON_T_DROP	0x200 /* Count of frames not cntd correctly */
+#define RMON_T_PACKETS	0x204 /* RMON TX packet count */
+#define RMON_T_BC_PKT	0x208 /* RMON TX broadcast pkts */
+#define RMON_T_MC_PKT	0x20c /* RMON TX multicast pkts */
+#define RMON_T_CRC_ALIGN	0x210 /* RMON TX pkts with CRC align err */
+#define RMON_T_UNDERSIZE	0x214 /* RMON TX pkts < 64 bytes, good CRC */
+#define RMON_T_OVERSIZE	0x218 /* RMON TX pkts > MAX_FL bytes good CRC */
+#define RMON_T_FRAG	0x21c /* RMON TX pkts < 64 bytes, bad CRC */
+#define RMON_T_JAB	0x220 /* RMON TX pkts > MAX_FL bytes, bad CRC */
+#define RMON_T_COL	0x224 /* RMON TX collision count */
+#define RMON_T_P64	0x228 /* RMON TX 64 byte pkts */
+#define RMON_T_P65TO127	0x22c /* RMON TX 65 to 127 byte pkts */
+#define RMON_T_P128TO255	0x230 /* RMON TX 128 to 255 byte pkts */
+#define RMON_T_P256TO511	0x234 /* RMON TX 256 to 511 byte pkts */
+#define RMON_T_P512TO1023	0x238 /* RMON TX 512 to 1023 byte pkts */
+#define RMON_T_P1024TO2047	0x23c /* RMON TX 1024 to 2047 byte pkts */
+#define RMON_T_P_GTE2048	0x240 /* RMON TX pkts > 2048 bytes */
+#define RMON_T_OCTETS	0x244 /* RMON TX octets */
+#define IEEE_T_DROP	0x248 /* Count of frames not counted crtly */
+#define IEEE_T_FRAME_OK	0x24c /* Frames tx'd OK */
+#define IEEE_T_1COL	0x250 /* Frames tx'd with single collision */
+#define IEEE_T_MCOL	0x254 /* Frames tx'd with multiple collision */
+#define IEEE_T_DEF	0x258 /* Frames tx'd after deferral delay */
+#define IEEE_T_LCOL	0x25c /* Frames tx'd with late collision */
+#define IEEE_T_EXCOL	0x260 /* Frames tx'd with excesv collisions */
+#define IEEE_T_MACERR	0x264 /* Frames tx'd with TX FIFO underrun */
+#define IEEE_T_CSERR	0x268 /* Frames tx'd with carrier sense err */
+#define IEEE_T_SQE	0x26c /* Frames tx'd with SQE err */
+#define IEEE_T_FDXFC	0x270 /* Flow control pause frames tx'd */
+#define IEEE_T_OCTETS_OK	0x274 /* Octet count for frames tx'd w/o err */
+#define RMON_R_PACKETS	0x284 /* RMON RX packet count */
+#define RMON_R_BC_PKT	0x288 /* RMON RX broadcast pkts */
+#define RMON_R_MC_PKT	0x28c /* RMON RX multicast pkts */
+#define RMON_R_CRC_ALIGN	0x290 /* RMON RX pkts with CRC alignment err */
+#define RMON_R_UNDERSIZE	0x294 /* RMON RX pkts < 64 bytes, good CRC */
+#define RMON_R_OVERSIZE	0x298 /* RMON RX pkts > MAX_FL bytes good CRC */
+#define RMON_R_FRAG	0x29c /* RMON RX pkts < 64 bytes, bad CRC */
+#define RMON_R_JAB	0x2a0 /* RMON RX pkts > MAX_FL bytes, bad CRC */
+#define RMON_R_RESVD_O	0x2a4 /* Reserved */
+#define RMON_R_P64	0x2a8 /* RMON RX 64 byte pkts */
+#define RMON_R_P65TO127	0x2ac /* RMON RX 65 to 127 byte pkts */
+#define RMON_R_P128TO255	0x2b0 /* RMON RX 128 to 255 byte pkts */
+#define RMON_R_P256TO511	0x2b4 /* RMON RX 256 to 511 byte pkts */
+#define RMON_R_P512TO1023	0x2b8 /* RMON RX 512 to 1023 byte pkts */
+#define RMON_R_P1024TO2047	0x2bc /* RMON RX 1024 to 2047 byte pkts */
+#define RMON_R_P_GTE2048	0x2c0 /* RMON RX pkts > 2048 bytes */
+#define RMON_R_OCTETS	0x2c4 /* RMON RX octets */
+#define IEEE_R_DROP	0x2c8 /* Count frames not counted correctly */
+#define IEEE_R_FRAME_OK	0x2cc /* Frames rx'd OK */
+#define IEEE_R_CRC	0x2d0 /* Frames rx'd with CRC err */
+#define IEEE_R_ALIGN	0x2d4 /* Frames rx'd with alignment err */
+#define IEEE_R_MACERR	0x2d8 /* Receive FIFO overflow count */
+#define IEEE_R_FDXFC	0x2dc /* Flow control pause frames rx'd */
+#define IEEE_R_OCTETS_OK	0x2e0 /* Octet cnt for frames rx'd w/o err */
+
+#define EMAC_SMAC_0_0	0x500 /*Supplemental MAC Address 0 (RW).*/
+#define EMAC_SMAC_0_1	0x504 /*Supplemental MAC Address 0 (RW).*/
+
+/* GEMAC definitions and settings */
+
+#define EMAC_PORT_0	0
+#define EMAC_PORT_1	1
+
+/* GEMAC Bit definitions */
+#define EMAC_IEVENT_HBERR		 0x80000000
+#define EMAC_IEVENT_BABR		 0x40000000
+#define EMAC_IEVENT_BABT		 0x20000000
+#define EMAC_IEVENT_GRA			 0x10000000
+#define EMAC_IEVENT_TXF			 0x08000000
+#define EMAC_IEVENT_TXB			 0x04000000
+#define EMAC_IEVENT_RXF			 0x02000000
+#define EMAC_IEVENT_RXB			 0x01000000
+#define EMAC_IEVENT_MII			 0x00800000
+#define EMAC_IEVENT_EBERR		 0x00400000
+#define EMAC_IEVENT_LC			 0x00200000
+#define EMAC_IEVENT_RL			 0x00100000
+#define EMAC_IEVENT_UN			 0x00080000
+
+#define EMAC_IMASK_HBERR                 0x80000000
+#define EMAC_IMASK_BABR                  0x40000000
+#define EMAC_IMASKT_BABT                 0x20000000
+#define EMAC_IMASK_GRA                   0x10000000
+#define EMAC_IMASKT_TXF                  0x08000000
+#define EMAC_IMASK_TXB                   0x04000000
+#define EMAC_IMASKT_RXF                  0x02000000
+#define EMAC_IMASK_RXB                   0x01000000
+#define EMAC_IMASK_MII                   0x00800000
+#define EMAC_IMASK_EBERR                 0x00400000
+#define EMAC_IMASK_LC                    0x00200000
+#define EMAC_IMASKT_RL                   0x00100000
+#define EMAC_IMASK_UN                    0x00080000
+
+#define EMAC_RCNTRL_MAX_FL_SHIFT         16
+#define EMAC_RCNTRL_LOOP                 0x00000001
+#define EMAC_RCNTRL_DRT                  0x00000002
+#define EMAC_RCNTRL_MII_MODE             0x00000004
+#define EMAC_RCNTRL_PROM                 0x00000008
+#define EMAC_RCNTRL_BC_REJ               0x00000010
+#define EMAC_RCNTRL_FCE                  0x00000020
+#define EMAC_RCNTRL_RGMII                0x00000040
+#define EMAC_RCNTRL_SGMII                0x00000080
+#define EMAC_RCNTRL_RMII                 0x00000100
+#define EMAC_RCNTRL_RMII_10T             0x00000200
+#define EMAC_RCNTRL_CRC_FWD		 0x00004000
+
+#define EMAC_TCNTRL_GTS                  0x00000001
+#define EMAC_TCNTRL_HBC                  0x00000002
+#define EMAC_TCNTRL_FDEN                 0x00000004
+#define EMAC_TCNTRL_TFC_PAUSE            0x00000008
+#define EMAC_TCNTRL_RFC_PAUSE            0x00000010
+
+#define EMAC_ECNTRL_RESET                0x00000001      /* reset the EMAC */
+#define EMAC_ECNTRL_ETHER_EN             0x00000002      /* enable the EMAC */
+#define EMAC_ECNTRL_MAGIC_ENA		 0x00000004
+#define EMAC_ECNTRL_SLEEP		 0x00000008
+#define EMAC_ECNTRL_SPEED                0x00000020
+#define EMAC_ECNTRL_DBSWAP               0x00000100
+
+#define EMAC_X_WMRK_STRFWD               0x00000100
+
+#define EMAC_X_DES_ACTIVE_TDAR           0x01000000
+#define EMAC_R_DES_ACTIVE_RDAR           0x01000000
+
+#define EMAC_RX_SECTION_EMPTY_V		0x00010006
+/*
+ * The possible operating speeds of the MAC, currently supporting 10, 100 and
+ * 1000Mb modes.
+ */
+enum mac_speed {SPEED_10M, SPEED_100M, SPEED_1000M, SPEED_1000M_PCS};
+
+/* MII-related definitios */
+#define EMAC_MII_DATA_ST         0x40000000      /* Start of frame delimiter */
+#define EMAC_MII_DATA_OP_RD      0x20000000      /* Perform a read operation */
+#define EMAC_MII_DATA_OP_CL45_RD 0x30000000      /* Perform a read operation */
+#define EMAC_MII_DATA_OP_WR      0x10000000      /* Perform a write operation */
+#define EMAC_MII_DATA_OP_CL45_WR 0x10000000      /* Perform a write operation */
+#define EMAC_MII_DATA_PA_MSK     0x0f800000      /* PHY Address field mask */
+#define EMAC_MII_DATA_RA_MSK     0x007c0000      /* PHY Register field mask */
+#define EMAC_MII_DATA_TA         0x00020000      /* Turnaround */
+#define EMAC_MII_DATA_DATAMSK    0x0000ffff      /* PHY data field */
+
+#define EMAC_MII_DATA_RA_SHIFT   18      /* MII Register address bits */
+#define EMAC_MII_DATA_RA_MASK	 0x1F      /* MII Register address mask */
+#define EMAC_MII_DATA_PA_SHIFT   23      /* MII PHY address bits */
+#define EMAC_MII_DATA_PA_MASK    0x1F      /* MII PHY address mask */
+
+#define EMAC_MII_DATA_RA(v) (((v) & EMAC_MII_DATA_RA_MASK) << \
+				EMAC_MII_DATA_RA_SHIFT)
+#define EMAC_MII_DATA_PA(v) (((v) & EMAC_MII_DATA_RA_MASK) << \
+				EMAC_MII_DATA_PA_SHIFT)
+#define EMAC_MII_DATA(v)    ((v) & 0xffff)
+
+#define EMAC_MII_SPEED_SHIFT	1
+#define EMAC_HOLDTIME_SHIFT	8
+#define EMAC_HOLDTIME_MASK	0x7
+#define EMAC_HOLDTIME(v)	(((v) & EMAC_HOLDTIME_MASK) << \
+					EMAC_HOLDTIME_SHIFT)
+
+/*
+ * The Address organisation for the MAC device.  All addresses are split into
+ * two 32-bit register fields.  The first one (bottom) is the lower 32-bits of
+ * the address and the other field are the high order bits - this may be 16-bits
+ * in the case of MAC addresses, or 32-bits for the hash address.
+ * In terms of memory storage, the first item (bottom) is assumed to be at a
+ * lower address location than 'top'. i.e. top should be at address location of
+ * 'bottom' + 4 bytes.
+ */
+struct pfe_mac_addr {
+	u32 bottom;     /* Lower 32-bits of address. */
+	u32 top;        /* Upper 32-bits of address. */
+};
+
+/*
+ * The following is the organisation of the address filters section of the MAC
+ * registers.  The Cadence MAC contains four possible specific address match
+ * addresses, if an incoming frame corresponds to any one of these four
+ * addresses then the frame will be copied to memory.
+ * It is not necessary for all four of the address match registers to be
+ * programmed, this is application dependent.
+ */
+struct spec_addr {
+	struct pfe_mac_addr one;        /* Specific address register 1. */
+	struct pfe_mac_addr two;        /* Specific address register 2. */
+	struct pfe_mac_addr three;      /* Specific address register 3. */
+	struct pfe_mac_addr four;       /* Specific address register 4. */
+};
+
+struct gemac_cfg {
+	u32 mode;
+	u32 speed;
+	u32 duplex;
+};
+
+/* EMAC Hash size */
+#define EMAC_HASH_REG_BITS       64
+
+#define EMAC_SPEC_ADDR_MAX	4
+
+#endif /* _EMAC_H_ */
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/gpi.h
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _GPI_H_
+#define _GPI_H_
+
+#define GPI_VERSION	0x00
+#define GPI_CTRL	0x04
+#define GPI_RX_CONFIG	0x08
+#define GPI_HDR_SIZE	0x0c
+#define GPI_BUF_SIZE	0x10
+#define GPI_LMEM_ALLOC_ADDR	0x14
+#define GPI_LMEM_FREE_ADDR	0x18
+#define GPI_DDR_ALLOC_ADDR	0x1c
+#define GPI_DDR_FREE_ADDR	0x20
+#define GPI_CLASS_ADDR	0x24
+#define GPI_DRX_FIFO	0x28
+#define GPI_TRX_FIFO	0x2c
+#define GPI_INQ_PKTPTR	0x30
+#define GPI_DDR_DATA_OFFSET	0x34
+#define GPI_LMEM_DATA_OFFSET	0x38
+#define GPI_TMLF_TX	0x4c
+#define GPI_DTX_ASEQ	0x50
+#define GPI_FIFO_STATUS	0x54
+#define GPI_FIFO_DEBUG	0x58
+#define GPI_TX_PAUSE_TIME	0x5c
+#define GPI_LMEM_SEC_BUF_DATA_OFFSET	0x60
+#define GPI_DDR_SEC_BUF_DATA_OFFSET	0x64
+#define GPI_TOE_CHKSUM_EN	0x68
+#define GPI_OVERRUN_DROPCNT	0x6c
+#define GPI_CSR_MTIP_PAUSE_REG		0x74
+#define GPI_CSR_MTIP_PAUSE_QUANTUM	0x78
+#define GPI_CSR_RX_CNT			0x7c
+#define GPI_CSR_TX_CNT			0x80
+#define GPI_CSR_DEBUG1			0x84
+#define GPI_CSR_DEBUG2			0x88
+
+struct gpi_cfg {
+	u32 lmem_rtry_cnt;
+	u32 tmlf_txthres;
+	u32 aseq_len;
+	u32 mtip_pause_reg;
+};
+
+/* GPI commons defines */
+#define GPI_LMEM_BUF_EN	0x1
+#define GPI_DDR_BUF_EN	0x1
+
+/* EGPI 1 defines */
+#define EGPI1_LMEM_RTRY_CNT	0x40
+#define EGPI1_TMLF_TXTHRES	0xBC
+#define EGPI1_ASEQ_LEN	0x50
+
+/* EGPI 2 defines */
+#define EGPI2_LMEM_RTRY_CNT	0x40
+#define EGPI2_TMLF_TXTHRES	0xBC
+#define EGPI2_ASEQ_LEN	0x40
+
+/* EGPI 3 defines */
+#define EGPI3_LMEM_RTRY_CNT	0x40
+#define EGPI3_TMLF_TXTHRES	0xBC
+#define EGPI3_ASEQ_LEN	0x40
+
+/* HGPI defines */
+#define HGPI_LMEM_RTRY_CNT	0x40
+#define HGPI_TMLF_TXTHRES	0xBC
+#define HGPI_ASEQ_LEN	0x40
+
+#define EGPI_PAUSE_TIME		0x000007D0
+#define EGPI_PAUSE_ENABLE	0x40000000
+#endif /* _GPI_H_ */
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/hif.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _HIF_H_
+#define _HIF_H_
+
+/* @file hif.h.
+ * hif - PFE hif block control and status register.
+ * Mapped on CBUS and accessible from all PE's and ARM.
+ */
+#define HIF_VERSION	(HIF_BASE_ADDR + 0x00)
+#define HIF_TX_CTRL	(HIF_BASE_ADDR + 0x04)
+#define HIF_TX_CURR_BD_ADDR	(HIF_BASE_ADDR + 0x08)
+#define HIF_TX_ALLOC	(HIF_BASE_ADDR + 0x0c)
+#define HIF_TX_BDP_ADDR	(HIF_BASE_ADDR + 0x10)
+#define HIF_TX_STATUS	(HIF_BASE_ADDR + 0x14)
+#define HIF_RX_CTRL	(HIF_BASE_ADDR + 0x20)
+#define HIF_RX_BDP_ADDR	(HIF_BASE_ADDR + 0x24)
+#define HIF_RX_STATUS	(HIF_BASE_ADDR + 0x30)
+#define HIF_INT_SRC	(HIF_BASE_ADDR + 0x34)
+#define HIF_INT_ENABLE	(HIF_BASE_ADDR + 0x38)
+#define HIF_POLL_CTRL	(HIF_BASE_ADDR + 0x3c)
+#define HIF_RX_CURR_BD_ADDR	(HIF_BASE_ADDR + 0x40)
+#define HIF_RX_ALLOC	(HIF_BASE_ADDR + 0x44)
+#define HIF_TX_DMA_STATUS	(HIF_BASE_ADDR + 0x48)
+#define HIF_RX_DMA_STATUS	(HIF_BASE_ADDR + 0x4c)
+#define HIF_INT_COAL	(HIF_BASE_ADDR + 0x50)
+
+/* HIF_INT_SRC/ HIF_INT_ENABLE control bits */
+#define HIF_INT		BIT(0)
+#define HIF_RXBD_INT	BIT(1)
+#define HIF_RXPKT_INT	BIT(2)
+#define HIF_TXBD_INT	BIT(3)
+#define HIF_TXPKT_INT	BIT(4)
+
+/* HIF_TX_CTRL bits */
+#define HIF_CTRL_DMA_EN			BIT(0)
+#define HIF_CTRL_BDP_POLL_CTRL_EN	BIT(1)
+#define HIF_CTRL_BDP_CH_START_WSTB	BIT(2)
+
+/* HIF_RX_STATUS bits */
+#define BDP_CSR_RX_DMA_ACTV     BIT(16)
+
+/* HIF_INT_ENABLE bits */
+#define HIF_INT_EN		BIT(0)
+#define HIF_RXBD_INT_EN		BIT(1)
+#define HIF_RXPKT_INT_EN	BIT(2)
+#define HIF_TXBD_INT_EN		BIT(3)
+#define HIF_TXPKT_INT_EN	BIT(4)
+
+/* HIF_POLL_CTRL bits*/
+#define HIF_RX_POLL_CTRL_CYCLE	0x0400
+#define HIF_TX_POLL_CTRL_CYCLE	0x0400
+
+/* HIF_INT_COAL bits*/
+#define HIF_INT_COAL_ENABLE	BIT(31)
+
+/* Buffer descriptor control bits */
+#define BD_CTRL_BUFLEN_MASK	0x3fff
+#define BD_BUF_LEN(x)	((x) & BD_CTRL_BUFLEN_MASK)
+#define BD_CTRL_CBD_INT_EN	BIT(16)
+#define BD_CTRL_PKT_INT_EN	BIT(17)
+#define BD_CTRL_LIFM		BIT(18)
+#define BD_CTRL_LAST_BD		BIT(19)
+#define BD_CTRL_DIR		BIT(20)
+#define BD_CTRL_LMEM_CPY	BIT(21) /* Valid only for HIF_NOCPY */
+#define BD_CTRL_PKT_XFER	BIT(24)
+#define BD_CTRL_DESC_EN		BIT(31)
+#define BD_CTRL_PARSE_DISABLE	BIT(25)
+#define BD_CTRL_BRFETCH_DISABLE	BIT(26)
+#define BD_CTRL_RTFETCH_DISABLE	BIT(27)
+
+/* Buffer descriptor status bits*/
+#define BD_STATUS_CONN_ID(x)	((x) & 0xffff)
+#define BD_STATUS_DIR_PROC_ID	BIT(16)
+#define BD_STATUS_CONN_ID_EN	BIT(17)
+#define BD_STATUS_PE2PROC_ID(x)	(((x) & 7) << 18)
+#define BD_STATUS_LE_DATA	BIT(21)
+#define BD_STATUS_CHKSUM_EN	BIT(22)
+
+/* HIF Buffer descriptor status bits */
+#define DIR_PROC_ID	BIT(16)
+#define PROC_ID(id)	((id) << 18)
+
+#endif /* _HIF_H_ */
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/hif_nocpy.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _HIF_NOCPY_H_
+#define _HIF_NOCPY_H_
+
+#define HIF_NOCPY_VERSION	(HIF_NOCPY_BASE_ADDR + 0x00)
+#define HIF_NOCPY_TX_CTRL	(HIF_NOCPY_BASE_ADDR + 0x04)
+#define HIF_NOCPY_TX_CURR_BD_ADDR	(HIF_NOCPY_BASE_ADDR + 0x08)
+#define HIF_NOCPY_TX_ALLOC	(HIF_NOCPY_BASE_ADDR + 0x0c)
+#define HIF_NOCPY_TX_BDP_ADDR	(HIF_NOCPY_BASE_ADDR + 0x10)
+#define HIF_NOCPY_TX_STATUS	(HIF_NOCPY_BASE_ADDR + 0x14)
+#define HIF_NOCPY_RX_CTRL	(HIF_NOCPY_BASE_ADDR + 0x20)
+#define HIF_NOCPY_RX_BDP_ADDR	(HIF_NOCPY_BASE_ADDR + 0x24)
+#define HIF_NOCPY_RX_STATUS	(HIF_NOCPY_BASE_ADDR + 0x30)
+#define HIF_NOCPY_INT_SRC	(HIF_NOCPY_BASE_ADDR + 0x34)
+#define HIF_NOCPY_INT_ENABLE	(HIF_NOCPY_BASE_ADDR + 0x38)
+#define HIF_NOCPY_POLL_CTRL	(HIF_NOCPY_BASE_ADDR + 0x3c)
+#define HIF_NOCPY_RX_CURR_BD_ADDR	(HIF_NOCPY_BASE_ADDR + 0x40)
+#define HIF_NOCPY_RX_ALLOC	(HIF_NOCPY_BASE_ADDR + 0x44)
+#define HIF_NOCPY_TX_DMA_STATUS	(HIF_NOCPY_BASE_ADDR + 0x48)
+#define HIF_NOCPY_RX_DMA_STATUS	(HIF_NOCPY_BASE_ADDR + 0x4c)
+#define HIF_NOCPY_RX_INQ0_PKTPTR	(HIF_NOCPY_BASE_ADDR + 0x50)
+#define HIF_NOCPY_RX_INQ1_PKTPTR	(HIF_NOCPY_BASE_ADDR + 0x54)
+#define HIF_NOCPY_TX_PORT_NO	(HIF_NOCPY_BASE_ADDR + 0x60)
+#define HIF_NOCPY_LMEM_ALLOC_ADDR	(HIF_NOCPY_BASE_ADDR + 0x64)
+#define HIF_NOCPY_CLASS_ADDR	(HIF_NOCPY_BASE_ADDR + 0x68)
+#define HIF_NOCPY_TMU_PORT0_ADDR	(HIF_NOCPY_BASE_ADDR + 0x70)
+#define HIF_NOCPY_TMU_PORT1_ADDR	(HIF_NOCPY_BASE_ADDR + 0x74)
+#define HIF_NOCPY_TMU_PORT2_ADDR	(HIF_NOCPY_BASE_ADDR + 0x7c)
+#define HIF_NOCPY_TMU_PORT3_ADDR	(HIF_NOCPY_BASE_ADDR + 0x80)
+#define HIF_NOCPY_TMU_PORT4_ADDR	(HIF_NOCPY_BASE_ADDR + 0x84)
+#define HIF_NOCPY_INT_COAL	(HIF_NOCPY_BASE_ADDR + 0x90)
+
+#endif /* _HIF_NOCPY_H_ */
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/tmu_csr.h
@@ -0,0 +1,168 @@
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TMU_CSR_H_
+#define _TMU_CSR_H_
+
+#define TMU_VERSION	(TMU_CSR_BASE_ADDR + 0x000)
+#define TMU_INQ_WATERMARK	(TMU_CSR_BASE_ADDR + 0x004)
+#define TMU_PHY_INQ_PKTPTR	(TMU_CSR_BASE_ADDR + 0x008)
+#define TMU_PHY_INQ_PKTINFO	(TMU_CSR_BASE_ADDR + 0x00c)
+#define TMU_PHY_INQ_FIFO_CNT	(TMU_CSR_BASE_ADDR + 0x010)
+#define TMU_SYS_GENERIC_CONTROL	(TMU_CSR_BASE_ADDR + 0x014)
+#define TMU_SYS_GENERIC_STATUS	(TMU_CSR_BASE_ADDR + 0x018)
+#define TMU_SYS_GEN_CON0	(TMU_CSR_BASE_ADDR + 0x01c)
+#define TMU_SYS_GEN_CON1	(TMU_CSR_BASE_ADDR + 0x020)
+#define TMU_SYS_GEN_CON2	(TMU_CSR_BASE_ADDR + 0x024)
+#define TMU_SYS_GEN_CON3	(TMU_CSR_BASE_ADDR + 0x028)
+#define TMU_SYS_GEN_CON4	(TMU_CSR_BASE_ADDR + 0x02c)
+#define TMU_TEQ_DISABLE_DROPCHK	(TMU_CSR_BASE_ADDR + 0x030)
+#define TMU_TEQ_CTRL	(TMU_CSR_BASE_ADDR + 0x034)
+#define TMU_TEQ_QCFG	(TMU_CSR_BASE_ADDR + 0x038)
+#define TMU_TEQ_DROP_STAT	(TMU_CSR_BASE_ADDR + 0x03c)
+#define TMU_TEQ_QAVG	(TMU_CSR_BASE_ADDR + 0x040)
+#define TMU_TEQ_WREG_PROB	(TMU_CSR_BASE_ADDR + 0x044)
+#define TMU_TEQ_TRANS_STAT	(TMU_CSR_BASE_ADDR + 0x048)
+#define TMU_TEQ_HW_PROB_CFG0	(TMU_CSR_BASE_ADDR + 0x04c)
+#define TMU_TEQ_HW_PROB_CFG1	(TMU_CSR_BASE_ADDR + 0x050)
+#define TMU_TEQ_HW_PROB_CFG2	(TMU_CSR_BASE_ADDR + 0x054)
+#define TMU_TEQ_HW_PROB_CFG3	(TMU_CSR_BASE_ADDR + 0x058)
+#define TMU_TEQ_HW_PROB_CFG4	(TMU_CSR_BASE_ADDR + 0x05c)
+#define TMU_TEQ_HW_PROB_CFG5	(TMU_CSR_BASE_ADDR + 0x060)
+#define TMU_TEQ_HW_PROB_CFG6	(TMU_CSR_BASE_ADDR + 0x064)
+#define TMU_TEQ_HW_PROB_CFG7	(TMU_CSR_BASE_ADDR + 0x068)
+#define TMU_TEQ_HW_PROB_CFG8	(TMU_CSR_BASE_ADDR + 0x06c)
+#define TMU_TEQ_HW_PROB_CFG9	(TMU_CSR_BASE_ADDR + 0x070)
+#define TMU_TEQ_HW_PROB_CFG10	(TMU_CSR_BASE_ADDR + 0x074)
+#define TMU_TEQ_HW_PROB_CFG11	(TMU_CSR_BASE_ADDR + 0x078)
+#define TMU_TEQ_HW_PROB_CFG12	(TMU_CSR_BASE_ADDR + 0x07c)
+#define TMU_TEQ_HW_PROB_CFG13	(TMU_CSR_BASE_ADDR + 0x080)
+#define TMU_TEQ_HW_PROB_CFG14	(TMU_CSR_BASE_ADDR + 0x084)
+#define TMU_TEQ_HW_PROB_CFG15	(TMU_CSR_BASE_ADDR + 0x088)
+#define TMU_TEQ_HW_PROB_CFG16	(TMU_CSR_BASE_ADDR + 0x08c)
+#define TMU_TEQ_HW_PROB_CFG17	(TMU_CSR_BASE_ADDR + 0x090)
+#define TMU_TEQ_HW_PROB_CFG18	(TMU_CSR_BASE_ADDR + 0x094)
+#define TMU_TEQ_HW_PROB_CFG19	(TMU_CSR_BASE_ADDR + 0x098)
+#define TMU_TEQ_HW_PROB_CFG20	(TMU_CSR_BASE_ADDR + 0x09c)
+#define TMU_TEQ_HW_PROB_CFG21	(TMU_CSR_BASE_ADDR + 0x0a0)
+#define TMU_TEQ_HW_PROB_CFG22	(TMU_CSR_BASE_ADDR + 0x0a4)
+#define TMU_TEQ_HW_PROB_CFG23	(TMU_CSR_BASE_ADDR + 0x0a8)
+#define TMU_TEQ_HW_PROB_CFG24	(TMU_CSR_BASE_ADDR + 0x0ac)
+#define TMU_TEQ_HW_PROB_CFG25	(TMU_CSR_BASE_ADDR + 0x0b0)
+#define TMU_TDQ_IIFG_CFG	(TMU_CSR_BASE_ADDR + 0x0b4)
+/* [9:0] Scheduler Enable for each of the scheduler in the TDQ.
+ * This is a global Enable for all schedulers in PHY0
+ */
+#define TMU_TDQ0_SCH_CTRL	(TMU_CSR_BASE_ADDR + 0x0b8)
+
+#define TMU_LLM_CTRL	(TMU_CSR_BASE_ADDR + 0x0bc)
+#define TMU_LLM_BASE_ADDR	(TMU_CSR_BASE_ADDR + 0x0c0)
+#define TMU_LLM_QUE_LEN	(TMU_CSR_BASE_ADDR + 0x0c4)
+#define TMU_LLM_QUE_HEADPTR	(TMU_CSR_BASE_ADDR + 0x0c8)
+#define TMU_LLM_QUE_TAILPTR	(TMU_CSR_BASE_ADDR + 0x0cc)
+#define TMU_LLM_QUE_DROPCNT	(TMU_CSR_BASE_ADDR + 0x0d0)
+#define TMU_INT_EN	(TMU_CSR_BASE_ADDR + 0x0d4)
+#define TMU_INT_SRC	(TMU_CSR_BASE_ADDR + 0x0d8)
+#define TMU_INQ_STAT	(TMU_CSR_BASE_ADDR + 0x0dc)
+#define TMU_CTRL	(TMU_CSR_BASE_ADDR + 0x0e0)
+
+/* [31] Mem Access Command. 0 = Internal Memory Read, 1 = Internal memory
+ * Write [27:24] Byte Enables of the Internal memory access [23:0] Address of
+ * the internal memory. This address is used to access both the PM and DM of
+ * all the PE's
+ */
+#define TMU_MEM_ACCESS_ADDR	(TMU_CSR_BASE_ADDR + 0x0e4)
+
+/* Internal Memory Access Write Data */
+#define TMU_MEM_ACCESS_WDATA	(TMU_CSR_BASE_ADDR + 0x0e8)
+/* Internal Memory Access Read Data. The commands are blocked
+ * at the mem_access only
+ */
+#define TMU_MEM_ACCESS_RDATA	(TMU_CSR_BASE_ADDR + 0x0ec)
+
+/* [31:0] PHY0 in queue address (must be initialized with one of the
+ * xxx_INQ_PKTPTR cbus addresses)
+ */
+#define TMU_PHY0_INQ_ADDR	(TMU_CSR_BASE_ADDR + 0x0f0)
+/* [31:0] PHY1 in queue address (must be initialized with one of the
+ * xxx_INQ_PKTPTR cbus addresses)
+ */
+#define TMU_PHY1_INQ_ADDR	(TMU_CSR_BASE_ADDR + 0x0f4)
+/* [31:0] PHY2 in queue address (must be initialized with one of the
+ * xxx_INQ_PKTPTR cbus addresses)
+ */
+#define TMU_PHY2_INQ_ADDR	(TMU_CSR_BASE_ADDR + 0x0f8)
+/* [31:0] PHY3 in queue address (must be initialized with one of the
+ * xxx_INQ_PKTPTR cbus addresses)
+ */
+#define TMU_PHY3_INQ_ADDR	(TMU_CSR_BASE_ADDR + 0x0fc)
+#define TMU_BMU_INQ_ADDR	(TMU_CSR_BASE_ADDR + 0x100)
+#define TMU_TX_CTRL	(TMU_CSR_BASE_ADDR + 0x104)
+
+#define TMU_BUS_ACCESS_WDATA	(TMU_CSR_BASE_ADDR + 0x108)
+#define TMU_BUS_ACCESS	(TMU_CSR_BASE_ADDR + 0x10c)
+#define TMU_BUS_ACCESS_RDATA	(TMU_CSR_BASE_ADDR + 0x110)
+
+#define TMU_PE_SYS_CLK_RATIO	(TMU_CSR_BASE_ADDR + 0x114)
+#define TMU_PE_STATUS	(TMU_CSR_BASE_ADDR + 0x118)
+#define TMU_TEQ_MAX_THRESHOLD	(TMU_CSR_BASE_ADDR + 0x11c)
+/* [31:0] PHY4 in queue address (must be initialized with one of the
+ * xxx_INQ_PKTPTR cbus addresses)
+ */
+#define TMU_PHY4_INQ_ADDR	(TMU_CSR_BASE_ADDR + 0x134)
+/* [9:0] Scheduler Enable for each of the scheduler in the TDQ.
+ * This is a global Enable for all schedulers in PHY1
+ */
+#define TMU_TDQ1_SCH_CTRL	(TMU_CSR_BASE_ADDR + 0x138)
+/* [9:0] Scheduler Enable for each of the scheduler in the TDQ.
+ * This is a global Enable for all schedulers in PHY2
+ */
+#define TMU_TDQ2_SCH_CTRL	(TMU_CSR_BASE_ADDR + 0x13c)
+/* [9:0] Scheduler Enable for each of the scheduler in the TDQ.
+ * This is a global Enable for all schedulers in PHY3
+ */
+#define TMU_TDQ3_SCH_CTRL	(TMU_CSR_BASE_ADDR + 0x140)
+#define TMU_BMU_BUF_SIZE	(TMU_CSR_BASE_ADDR + 0x144)
+/* [31:0] PHY5 in queue address (must be initialized with one of the
+ * xxx_INQ_PKTPTR cbus addresses)
+ */
+#define TMU_PHY5_INQ_ADDR	(TMU_CSR_BASE_ADDR + 0x148)
+
+#define SW_RESET		BIT(0)	/* Global software reset */
+#define INQ_RESET		BIT(2)
+#define TEQ_RESET		BIT(3)
+#define TDQ_RESET		BIT(4)
+#define PE_RESET		BIT(5)
+#define MEM_INIT		BIT(6)
+#define MEM_INIT_DONE		BIT(7)
+#define LLM_INIT		BIT(8)
+#define LLM_INIT_DONE		BIT(9)
+#define ECC_MEM_INIT_DONE	BIT(10)
+
+struct tmu_cfg {
+	u32 pe_sys_clk_ratio;
+	unsigned long llm_base_addr;
+	u32 llm_queue_len;
+};
+
+/* Not HW related for pfe_ctrl / pfe common defines */
+#define DEFAULT_MAX_QDEPTH	80
+#define DEFAULT_Q0_QDEPTH	511 /*We keep one large queue for host tx qos */
+#define DEFAULT_TMU3_QDEPTH	127
+
+#endif /* _TMU_CSR_H_ */
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/util_csr.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _UTIL_CSR_H_
+#define _UTIL_CSR_H_
+
+#define UTIL_VERSION	(UTIL_CSR_BASE_ADDR + 0x000)
+#define UTIL_TX_CTRL	(UTIL_CSR_BASE_ADDR + 0x004)
+#define UTIL_INQ_PKTPTR	(UTIL_CSR_BASE_ADDR + 0x010)
+
+#define UTIL_HDR_SIZE	(UTIL_CSR_BASE_ADDR + 0x014)
+
+#define UTIL_PE0_QB_DM_ADDR0	(UTIL_CSR_BASE_ADDR + 0x020)
+#define UTIL_PE0_QB_DM_ADDR1	(UTIL_CSR_BASE_ADDR + 0x024)
+#define UTIL_PE0_RO_DM_ADDR0	(UTIL_CSR_BASE_ADDR + 0x060)
+#define UTIL_PE0_RO_DM_ADDR1	(UTIL_CSR_BASE_ADDR + 0x064)
+
+#define UTIL_MEM_ACCESS_ADDR	(UTIL_CSR_BASE_ADDR + 0x100)
+#define UTIL_MEM_ACCESS_WDATA	(UTIL_CSR_BASE_ADDR + 0x104)
+#define UTIL_MEM_ACCESS_RDATA	(UTIL_CSR_BASE_ADDR + 0x108)
+
+#define UTIL_TM_INQ_ADDR	(UTIL_CSR_BASE_ADDR + 0x114)
+#define UTIL_PE_STATUS	(UTIL_CSR_BASE_ADDR + 0x118)
+
+#define UTIL_PE_SYS_CLK_RATIO	(UTIL_CSR_BASE_ADDR + 0x200)
+#define UTIL_AFULL_THRES	(UTIL_CSR_BASE_ADDR + 0x204)
+#define UTIL_GAP_BETWEEN_READS	(UTIL_CSR_BASE_ADDR + 0x208)
+#define UTIL_MAX_BUF_CNT	(UTIL_CSR_BASE_ADDR + 0x20c)
+#define UTIL_TSQ_FIFO_THRES	(UTIL_CSR_BASE_ADDR + 0x210)
+#define UTIL_TSQ_MAX_CNT	(UTIL_CSR_BASE_ADDR + 0x214)
+#define UTIL_IRAM_DATA_0	(UTIL_CSR_BASE_ADDR + 0x218)
+#define UTIL_IRAM_DATA_1	(UTIL_CSR_BASE_ADDR + 0x21c)
+#define UTIL_IRAM_DATA_2	(UTIL_CSR_BASE_ADDR + 0x220)
+#define UTIL_IRAM_DATA_3	(UTIL_CSR_BASE_ADDR + 0x224)
+
+#define UTIL_BUS_ACCESS_ADDR	(UTIL_CSR_BASE_ADDR + 0x228)
+#define UTIL_BUS_ACCESS_WDATA	(UTIL_CSR_BASE_ADDR + 0x22c)
+#define UTIL_BUS_ACCESS_RDATA	(UTIL_CSR_BASE_ADDR + 0x230)
+
+#define UTIL_INQ_AFULL_THRES	(UTIL_CSR_BASE_ADDR + 0x234)
+
+struct util_cfg {
+	u32 pe_sys_clk_ratio;
+};
+
+#endif /* _UTIL_CSR_H_ */
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/include/pfe/pfe.h
@@ -0,0 +1,372 @@
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _PFE_H_
+#define _PFE_H_
+
+#include "cbus.h"
+
+#define CLASS_DMEM_BASE_ADDR(i)	(0x00000000 | ((i) << 20))
+/*
+ * Only valid for mem access register interface
+ */
+#define CLASS_IMEM_BASE_ADDR(i)	(0x00000000 | ((i) << 20))
+#define CLASS_DMEM_SIZE	0x00002000
+#define CLASS_IMEM_SIZE	0x00008000
+
+#define TMU_DMEM_BASE_ADDR(i)	(0x00000000 + ((i) << 20))
+/*
+ * Only valid for mem access register interface
+ */
+#define TMU_IMEM_BASE_ADDR(i)	(0x00000000 + ((i) << 20))
+#define TMU_DMEM_SIZE	0x00000800
+#define TMU_IMEM_SIZE	0x00002000
+
+#define UTIL_DMEM_BASE_ADDR	0x00000000
+#define UTIL_DMEM_SIZE	0x00002000
+
+#define PE_LMEM_BASE_ADDR	0xc3010000
+#define PE_LMEM_SIZE	0x8000
+#define PE_LMEM_END	(PE_LMEM_BASE_ADDR + PE_LMEM_SIZE)
+
+#define DMEM_BASE_ADDR	0x00000000
+#define DMEM_SIZE	0x2000	/* TMU has less... */
+#define DMEM_END	(DMEM_BASE_ADDR + DMEM_SIZE)
+
+#define PMEM_BASE_ADDR	0x00010000
+#define PMEM_SIZE	0x8000	/* TMU has less... */
+#define PMEM_END	(PMEM_BASE_ADDR + PMEM_SIZE)
+
+/* These check memory ranges from PE point of view/memory map */
+#define IS_DMEM(addr, len)				\
+	({ typeof(addr) addr_ = (addr);			\
+	((unsigned long)(addr_) >= DMEM_BASE_ADDR) &&	\
+	(((unsigned long)(addr_) + (len)) <= DMEM_END); })
+
+#define IS_PMEM(addr, len)				\
+	({ typeof(addr) addr_ = (addr);			\
+	((unsigned long)(addr_) >= PMEM_BASE_ADDR) &&	\
+	(((unsigned long)(addr_) + (len)) <= PMEM_END); })
+
+#define IS_PE_LMEM(addr, len)				\
+	({ typeof(addr) addr_ = (addr);			\
+	((unsigned long)(addr_) >=			\
+	PE_LMEM_BASE_ADDR) &&				\
+	(((unsigned long)(addr_) +			\
+	(len)) <= PE_LMEM_END); })
+
+#define IS_PFE_LMEM(addr, len)				\
+	({ typeof(addr) addr_ = (addr);			\
+	((unsigned long)(addr_) >=			\
+	CBUS_VIRT_TO_PFE(LMEM_BASE_ADDR)) &&		\
+	(((unsigned long)(addr_) + (len)) <=		\
+	CBUS_VIRT_TO_PFE(LMEM_END)); })
+
+#define __IS_PHYS_DDR(addr, len)			\
+	({ typeof(addr) addr_ = (addr);			\
+	((unsigned long)(addr_) >=			\
+	DDR_PHYS_BASE_ADDR) &&				\
+	(((unsigned long)(addr_) + (len)) <=		\
+	DDR_PHYS_END); })
+
+#define IS_PHYS_DDR(addr, len)	__IS_PHYS_DDR(DDR_PFE_TO_PHYS(addr), len)
+
+/*
+ * If using a run-time virtual address for the cbus base address use this code
+ */
+extern void *cbus_base_addr;
+extern void *ddr_base_addr;
+extern unsigned long ddr_phys_base_addr;
+extern unsigned int ddr_size;
+
+#define CBUS_BASE_ADDR	cbus_base_addr
+#define DDR_PHYS_BASE_ADDR	ddr_phys_base_addr
+#define DDR_BASE_ADDR	ddr_base_addr
+#define DDR_SIZE	ddr_size
+
+#define DDR_PHYS_END	(DDR_PHYS_BASE_ADDR + DDR_SIZE)
+
+#define LS1012A_PFE_RESET_WA	/*
+				 * PFE doesn't have global reset and re-init
+				 * should takecare few things to make PFE
+				 * functional after reset
+				 */
+#define PFE_CBUS_PHYS_BASE_ADDR	0xc0000000	/* CBUS physical base address
+						 * as seen by PE's.
+						 */
+/* CBUS physical base address as seen by PE's. */
+#define PFE_CBUS_PHYS_BASE_ADDR_FROM_PFE	0xc0000000
+
+#define DDR_PHYS_TO_PFE(p)	(((unsigned long int)(p)) & 0x7FFFFFFF)
+#define DDR_PFE_TO_PHYS(p)	(((unsigned long int)(p)) | 0x80000000)
+#define CBUS_PHYS_TO_PFE(p)	(((p) - PFE_CBUS_PHYS_BASE_ADDR) + \
+				PFE_CBUS_PHYS_BASE_ADDR_FROM_PFE)
+/* Translates to PFE address map */
+
+#define DDR_PHYS_TO_VIRT(p)	(((p) - DDR_PHYS_BASE_ADDR) + DDR_BASE_ADDR)
+#define DDR_VIRT_TO_PHYS(v)	(((v) - DDR_BASE_ADDR) + DDR_PHYS_BASE_ADDR)
+#define DDR_VIRT_TO_PFE(p)	(DDR_PHYS_TO_PFE(DDR_VIRT_TO_PHYS(p)))
+
+#define CBUS_VIRT_TO_PFE(v)	(((v) - CBUS_BASE_ADDR) + \
+				PFE_CBUS_PHYS_BASE_ADDR)
+#define CBUS_PFE_TO_VIRT(p)	(((unsigned long int)(p) - \
+				PFE_CBUS_PHYS_BASE_ADDR) + CBUS_BASE_ADDR)
+
+/* The below part of the code is used in QOS control driver from host */
+#define TMU_APB_BASE_ADDR       0xc1000000      /* TMU base address seen by
+						 * pe's
+						 */
+
+enum {
+	CLASS0_ID = 0,
+	CLASS1_ID,
+	CLASS2_ID,
+	CLASS3_ID,
+	CLASS4_ID,
+	CLASS5_ID,
+	TMU0_ID,
+	TMU1_ID,
+	TMU2_ID,
+	TMU3_ID,
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+	UTIL_ID,
+#endif
+	MAX_PE
+};
+
+#define CLASS_MASK	(BIT(CLASS0_ID) | BIT(CLASS1_ID) |\
+			BIT(CLASS2_ID) | BIT(CLASS3_ID) |\
+			BIT(CLASS4_ID) | BIT(CLASS5_ID))
+#define CLASS_MAX_ID	CLASS5_ID
+
+#define TMU_MASK	(BIT(TMU0_ID) | BIT(TMU1_ID) |\
+			BIT(TMU3_ID))
+
+#define TMU_MAX_ID	TMU3_ID
+
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+#define UTIL_MASK	BIT(UTIL_ID)
+#endif
+
+struct pe_status {
+	u32	cpu_state;
+	u32	activity_counter;
+	u32	rx;
+	union {
+	u32	tx;
+	u32	tmu_qstatus;
+	};
+	u32	drop;
+#if defined(CFG_PE_DEBUG)
+	u32	debug_indicator;
+	u32	debug[16];
+#endif
+} __aligned(16);
+
+struct pe_sync_mailbox {
+	u32 stop;
+	u32 stopped;
+};
+
+/* Drop counter definitions */
+
+#define	CLASS_NUM_DROP_COUNTERS	13
+#define	UTIL_NUM_DROP_COUNTERS	8
+
+/* PE information.
+ * Structure containing PE's specific information. It is used to create
+ * generic C functions common to all PE's.
+ * Before using the library functions this structure needs to be initialized
+ * with the different registers virtual addresses
+ * (according to the ARM MMU mmaping). The default initialization supports a
+ * virtual == physical mapping.
+ */
+struct pe_info {
+	u32 dmem_base_addr;	/* PE's dmem base address */
+	u32 pmem_base_addr;	/* PE's pmem base address */
+	u32 pmem_size;	/* PE's pmem size */
+
+	void *mem_access_wdata;	/* PE's _MEM_ACCESS_WDATA register
+				 * address
+				 */
+	void *mem_access_addr;	/* PE's _MEM_ACCESS_ADDR register
+				 * address
+				 */
+	void *mem_access_rdata;	/* PE's _MEM_ACCESS_RDATA register
+				 * address
+				 */
+};
+
+void pe_lmem_read(u32 *dst, u32 len, u32 offset);
+void pe_lmem_write(u32 *src, u32 len, u32 offset);
+
+void pe_dmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len);
+void pe_pmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len);
+
+u32 pe_pmem_read(int id, u32 addr, u8 size);
+
+void pe_dmem_write(int id, u32 val, u32 addr, u8 size);
+u32 pe_dmem_read(int id, u32 addr, u8 size);
+void class_pe_lmem_memcpy_to32(u32 dst, const void *src, unsigned int len);
+void class_pe_lmem_memset(u32 dst, int val, unsigned int len);
+void class_bus_write(u32 val, u32 addr, u8 size);
+u32 class_bus_read(u32 addr, u8 size);
+
+#define class_bus_readl(addr)	class_bus_read(addr, 4)
+#define class_bus_readw(addr)	class_bus_read(addr, 2)
+#define class_bus_readb(addr)	class_bus_read(addr, 1)
+
+#define class_bus_writel(val, addr)	class_bus_write(val, addr, 4)
+#define class_bus_writew(val, addr)	class_bus_write(val, addr, 2)
+#define class_bus_writeb(val, addr)	class_bus_write(val, addr, 1)
+
+#define pe_dmem_readl(id, addr)	pe_dmem_read(id, addr, 4)
+#define pe_dmem_readw(id, addr)	pe_dmem_read(id, addr, 2)
+#define pe_dmem_readb(id, addr)	pe_dmem_read(id, addr, 1)
+
+#define pe_dmem_writel(id, val, addr)	pe_dmem_write(id, val, addr, 4)
+#define pe_dmem_writew(id, val, addr)	pe_dmem_write(id, val, addr, 2)
+#define pe_dmem_writeb(id, val, addr)	pe_dmem_write(id, val, addr, 1)
+
+/*int pe_load_elf_section(int id, const void *data, elf32_shdr *shdr); */
+int pe_load_elf_section(int id, const void *data, struct elf32_shdr *shdr,
+			struct device *dev);
+
+void pfe_lib_init(void *cbus_base, void *ddr_base, unsigned long ddr_phys_base,
+		  unsigned int ddr_size);
+void bmu_init(void *base, struct BMU_CFG *cfg);
+void bmu_reset(void *base);
+void bmu_enable(void *base);
+void bmu_disable(void *base);
+void bmu_set_config(void *base, struct BMU_CFG *cfg);
+
+/*
+ * An enumerated type for loopback values.  This can be one of three values, no
+ * loopback -normal operation, local loopback with internal loopback module of
+ * MAC or PHY loopback which is through the external PHY.
+ */
+#ifndef __MAC_LOOP_ENUM__
+#define __MAC_LOOP_ENUM__
+enum mac_loop {LB_NONE, LB_EXT, LB_LOCAL};
+#endif
+
+void gemac_init(void *base, void *config);
+void gemac_disable_rx_checksum_offload(void *base);
+void gemac_enable_rx_checksum_offload(void *base);
+void gemac_set_speed(void *base, enum mac_speed gem_speed);
+void gemac_set_duplex(void *base, int duplex);
+void gemac_set_mode(void *base, int mode);
+void gemac_enable(void *base);
+void gemac_tx_disable(void *base);
+void gemac_tx_enable(void *base);
+void gemac_disable(void *base);
+void gemac_reset(void *base);
+void gemac_set_address(void *base, struct spec_addr *addr);
+struct spec_addr gemac_get_address(void *base);
+void gemac_set_loop(void *base, enum mac_loop gem_loop);
+void gemac_set_laddr1(void *base, struct pfe_mac_addr *address);
+void gemac_set_laddr2(void *base, struct pfe_mac_addr *address);
+void gemac_set_laddr3(void *base, struct pfe_mac_addr *address);
+void gemac_set_laddr4(void *base, struct pfe_mac_addr *address);
+void gemac_set_laddrN(void *base, struct pfe_mac_addr *address,
+		      unsigned int entry_index);
+void gemac_clear_laddr1(void *base);
+void gemac_clear_laddr2(void *base);
+void gemac_clear_laddr3(void *base);
+void gemac_clear_laddr4(void *base);
+void gemac_clear_laddrN(void *base, unsigned int entry_index);
+struct pfe_mac_addr gemac_get_hash(void *base);
+void gemac_set_hash(void *base, struct pfe_mac_addr *hash);
+struct pfe_mac_addr gem_get_laddr1(void *base);
+struct pfe_mac_addr gem_get_laddr2(void *base);
+struct pfe_mac_addr gem_get_laddr3(void *base);
+struct pfe_mac_addr gem_get_laddr4(void *base);
+struct pfe_mac_addr gem_get_laddrN(void *base, unsigned int entry_index);
+void gemac_set_config(void *base, struct gemac_cfg *cfg);
+void gemac_allow_broadcast(void *base);
+void gemac_no_broadcast(void *base);
+void gemac_enable_1536_rx(void *base);
+void gemac_disable_1536_rx(void *base);
+void gemac_set_rx_max_fl(void *base, int mtu);
+void gemac_enable_rx_jmb(void *base);
+void gemac_disable_rx_jmb(void *base);
+void gemac_enable_stacked_vlan(void *base);
+void gemac_disable_stacked_vlan(void *base);
+void gemac_enable_pause_rx(void *base);
+void gemac_disable_pause_rx(void *base);
+void gemac_enable_copy_all(void *base);
+void gemac_disable_copy_all(void *base);
+void gemac_set_bus_width(void *base, int width);
+void gemac_set_wol(void *base, u32 wol_conf);
+
+void gpi_init(void *base, struct gpi_cfg *cfg);
+void gpi_reset(void *base);
+void gpi_enable(void *base);
+void gpi_disable(void *base);
+void gpi_set_config(void *base, struct gpi_cfg *cfg);
+
+void class_init(struct class_cfg *cfg);
+void class_reset(void);
+void class_enable(void);
+void class_disable(void);
+void class_set_config(struct class_cfg *cfg);
+
+void tmu_reset(void);
+void tmu_init(struct tmu_cfg *cfg);
+void tmu_enable(u32 pe_mask);
+void tmu_disable(u32 pe_mask);
+u32  tmu_qstatus(u32 if_id);
+u32  tmu_pkts_processed(u32 if_id);
+
+void util_init(struct util_cfg *cfg);
+void util_reset(void);
+void util_enable(void);
+void util_disable(void);
+
+void hif_init(void);
+void hif_tx_enable(void);
+void hif_tx_disable(void);
+void hif_rx_enable(void);
+void hif_rx_disable(void);
+
+/* Get Chip Revision level
+ *
+ */
+static inline unsigned int CHIP_REVISION(void)
+{
+	/*For LS1012A return always 1 */
+	return 1;
+}
+
+/* Start HIF rx DMA
+ *
+ */
+static inline void hif_rx_dma_start(void)
+{
+	writel(HIF_CTRL_DMA_EN | HIF_CTRL_BDP_CH_START_WSTB, HIF_RX_CTRL);
+}
+
+/* Start HIF tx DMA
+ *
+ */
+static inline void hif_tx_dma_start(void)
+{
+	writel(HIF_CTRL_DMA_EN | HIF_CTRL_BDP_CH_START_WSTB, HIF_TX_CTRL);
+}
+
+#endif /* _PFE_H_ */
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_cdev.c
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+/* @pfe_cdev.c.
+ *  Dummy device representing the PFE US in userspace.
+ *  - used for interacting with the kernel layer for link status
+ */
+
+#include <linux/eventfd.h>
+#include <linux/irqreturn.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+
+#include "pfe_cdev.h"
+#include "pfe_mod.h"
+
+static int pfe_majno;
+static struct class *pfe_char_class;
+static struct device *pfe_char_dev;
+struct eventfd_ctx *g_trigger;
+
+struct pfe_shared_info link_states[PFE_CDEV_ETH_COUNT];
+
+static int pfe_cdev_open(struct inode *inp, struct file *fp)
+{
+	pr_debug("PFE CDEV device opened.\n");
+	return 0;
+}
+
+static ssize_t pfe_cdev_read(struct file *fp, char *buf,
+			     size_t len, loff_t *off)
+{
+	int ret = 0;
+
+	pr_info("PFE CDEV attempt copying (%lu) size of user.\n",
+		sizeof(link_states));
+
+	pr_debug("Dump link_state on screen before copy_to_user\n");
+	for (; ret < PFE_CDEV_ETH_COUNT; ret++) {
+		pr_debug("%u  %u", link_states[ret].phy_id,
+			 link_states[ret].state);
+		pr_debug("\n");
+	}
+
+	/* Copy to user the value in buffer sized len */
+	ret = copy_to_user(buf, &link_states, sizeof(link_states));
+	if (ret != 0) {
+		pr_err("Failed to send (%d)bytes of (%lu) requested.\n",
+		       ret, len);
+		return -EFAULT;
+	}
+
+	/* offset set back to 0 as there is contextual reading offset */
+	*off = 0;
+	pr_debug("Read of (%lu) bytes performed.\n", sizeof(link_states));
+
+	return sizeof(link_states);
+}
+
+/**
+ * This function is for getting some commands from user through non-IOCTL
+ * channel. It can used to configure the device.
+ * TODO: To be filled in future, if require duplex communication with user
+ * space.
+ */
+static ssize_t pfe_cdev_write(struct file *fp, const char *buf,
+			      size_t len, loff_t *off)
+{
+	pr_info("PFE CDEV Write operation not supported!\n");
+
+	return -EFAULT;
+}
+
+static int pfe_cdev_release(struct inode *inp, struct file *fp)
+{
+	if (g_trigger) {
+		free_irq(pfe->hif_irq, g_trigger);
+		eventfd_ctx_put(g_trigger);
+		g_trigger = NULL;
+	}
+
+	pr_info("PFE_CDEV: Device successfully closed\n");
+	return 0;
+}
+
+/*
+ * hif_us_isr-
+ * This ISR routine processes Rx/Tx done interrupts from the HIF hardware block
+ */
+static irqreturn_t hif_us_isr(int irq, void *arg)
+{
+	struct eventfd_ctx *trigger = (struct eventfd_ctx *)arg;
+	int int_status;
+	int int_enable_mask;
+
+	/*Read hif interrupt source register */
+	int_status = readl_relaxed(HIF_INT_SRC);
+	int_enable_mask = readl_relaxed(HIF_INT_ENABLE);
+
+	if ((int_status & HIF_INT) == 0)
+		return IRQ_NONE;
+
+	if (int_status & HIF_RXPKT_INT) {
+		int_enable_mask &= ~(HIF_RXPKT_INT);
+		/* Disable interrupts, they will be enabled after
+		 * they are serviced
+		 */
+		writel_relaxed(int_enable_mask, HIF_INT_ENABLE);
+
+		eventfd_signal(trigger);
+	}
+
+	return IRQ_HANDLED;
+}
+
+#define PFE_INTR_COAL_USECS	100
+static long pfe_cdev_ioctl(struct file *fp, unsigned int cmd,
+			   unsigned long arg)
+{
+	int ret = -EFAULT;
+	int __user *argp = (int __user *)arg;
+
+	pr_debug("PFE CDEV IOCTL Called with cmd=(%u)\n", cmd);
+
+	switch (cmd) {
+	case PFE_CDEV_ETH0_STATE_GET:
+		/* Return an unsigned int (link state) for ETH0 */
+		*argp = link_states[0].state;
+		pr_debug("Returning state=%d for ETH0\n", *argp);
+		ret = 0;
+		break;
+	case PFE_CDEV_ETH1_STATE_GET:
+		/* Return an unsigned int (link state) for ETH0 */
+		*argp = link_states[1].state;
+		pr_debug("Returning state=%d for ETH1\n", *argp);
+		ret = 0;
+		break;
+	case PFE_CDEV_HIF_INTR_EN:
+		/* Return success/failure */
+		g_trigger = eventfd_ctx_fdget(*argp);
+		if (IS_ERR(g_trigger))
+			return PTR_ERR(g_trigger);
+		ret = request_irq(pfe->hif_irq, hif_us_isr, 0, "pfe_hif",
+				  g_trigger);
+		if (ret) {
+			pr_err("%s: failed to get the hif IRQ = %d\n",
+			       __func__, pfe->hif_irq);
+			eventfd_ctx_put(g_trigger);
+			g_trigger = NULL;
+		}
+		writel((PFE_INTR_COAL_USECS * (pfe->ctrl.sys_clk / 1000)) |
+			HIF_INT_COAL_ENABLE, HIF_INT_COAL);
+
+		pr_debug("request_irq for hif interrupt: %d\n", pfe->hif_irq);
+		ret = 0;
+		break;
+	default:
+		pr_info("Unsupport cmd (%d) for PFE CDEV.\n", cmd);
+		break;
+	};
+
+	return ret;
+}
+
+static unsigned int pfe_cdev_poll(struct file *fp,
+				  struct poll_table_struct *wait)
+{
+	pr_info("PFE CDEV poll method not supported\n");
+	return 0;
+}
+
+static const struct file_operations pfe_cdev_fops = {
+	.open = pfe_cdev_open,
+	.read = pfe_cdev_read,
+	.write = pfe_cdev_write,
+	.release = pfe_cdev_release,
+	.unlocked_ioctl = pfe_cdev_ioctl,
+	.poll = pfe_cdev_poll,
+};
+
+int pfe_cdev_init(void)
+{
+	int ret;
+
+	pr_debug("PFE CDEV initialization begin\n");
+
+	/* Register the major number for the device */
+	pfe_majno = register_chrdev(0, PFE_CDEV_NAME, &pfe_cdev_fops);
+	if (pfe_majno < 0) {
+		pr_err("Unable to register PFE CDEV. PFE CDEV not available\n");
+		ret = pfe_majno;
+		goto cleanup;
+	}
+
+	pr_debug("PFE CDEV assigned major number: %d\n", pfe_majno);
+
+	/* Register the class for the device */
+	pfe_char_class = class_create(PFE_CLASS_NAME);
+	if (IS_ERR(pfe_char_class)) {
+		pr_err(
+		"Failed to init class for PFE CDEV. PFE CDEV not available.\n");
+		ret = PTR_ERR(pfe_char_class);
+		goto cleanup;
+	}
+
+	pr_debug("PFE CDEV Class created successfully.\n");
+
+	/* Create the device without any parent and without any callback data */
+	    pfe_char_dev = device_create(pfe_char_class, NULL,
+					 MKDEV(pfe_majno, 0), NULL,
+					 PFE_CDEV_NAME);
+	if (IS_ERR(pfe_char_dev)) {
+		pr_err("Unable to PFE CDEV device. PFE CDEV not available.\n");
+		ret = PTR_ERR(pfe_char_dev);
+		goto cleanup;
+	}
+
+	/* Information structure being shared with the userspace */
+	memset(link_states, 0, sizeof(struct pfe_shared_info) *
+			PFE_CDEV_ETH_COUNT);
+
+	pr_info("PFE CDEV created: %s\n", PFE_CDEV_NAME);
+
+	ret = 0;
+	return ret;
+
+cleanup:
+	if (!IS_ERR(pfe_char_class))
+		class_destroy(pfe_char_class);
+
+	if (pfe_majno > 0)
+		unregister_chrdev(pfe_majno, PFE_CDEV_NAME);
+
+	return ret;
+}
+
+void pfe_cdev_exit(void)
+{
+	if (!IS_ERR(pfe_char_dev))
+		device_destroy(pfe_char_class, MKDEV(pfe_majno, 0));
+
+	if (!IS_ERR(pfe_char_class)) {
+		class_unregister(pfe_char_class);
+		class_destroy(pfe_char_class);
+	}
+
+	if (pfe_majno > 0)
+		unregister_chrdev(pfe_majno, PFE_CDEV_NAME);
+
+	/* reset the variables */
+	pfe_majno = 0;
+	pfe_char_class = NULL;
+	pfe_char_dev = NULL;
+
+	pr_info("PFE CDEV Removed.\n");
+}
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_cdev.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef _PFE_CDEV_H_
+#define _PFE_CDEV_H_
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/poll.h>
+
+#define  PFE_CDEV_NAME "pfe_us_cdev"
+#define  PFE_CLASS_NAME  "ppfe_us"
+
+/* Extracted from ls1012a_pfe_platform_data, there are 3 interfaces which are
+ * supported by PFE driver. Should be updated if number of eth devices are
+ * changed.
+ */
+#define PFE_CDEV_ETH_COUNT 3
+
+struct pfe_shared_info {
+	uint32_t phy_id; /* Link phy ID */
+	uint8_t state;  /* Has either 0 or 1 */
+};
+
+extern struct pfe_shared_info link_states[PFE_CDEV_ETH_COUNT];
+
+/* IOCTL Commands */
+#define PFE_CDEV_ETH0_STATE_GET		_IOR('R', 0, int)
+#define PFE_CDEV_ETH1_STATE_GET		_IOR('R', 1, int)
+#define PFE_CDEV_HIF_INTR_EN		_IOWR('R', 2, int)
+
+int pfe_cdev_init(void);
+void pfe_cdev_exit(void);
+
+#endif /* _PFE_CDEV_H_ */
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_ctrl.c
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/kthread.h>
+
+#include "pfe_mod.h"
+#include "pfe_ctrl.h"
+
+#define TIMEOUT_MS	1000
+
+int relax(unsigned long end)
+{
+	if (time_after(jiffies, end)) {
+		if (time_after(jiffies, end + (TIMEOUT_MS * HZ) / 1000))
+			return -1;
+
+		if (need_resched())
+			schedule();
+	}
+
+	return 0;
+}
+
+void pfe_ctrl_suspend(struct pfe_ctrl *ctrl)
+{
+	int id;
+
+	mutex_lock(&ctrl->mutex);
+
+	for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++)
+		pe_dmem_write(id, cpu_to_be32(0x1), CLASS_DM_RESUME, 4);
+
+	for (id = TMU0_ID; id <= TMU_MAX_ID; id++) {
+		if (id == TMU2_ID)
+			continue;
+		pe_dmem_write(id, cpu_to_be32(0x1), TMU_DM_RESUME, 4);
+	}
+
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+	pe_dmem_write(UTIL_ID, cpu_to_be32(0x1), UTIL_DM_RESUME, 4);
+#endif
+	mutex_unlock(&ctrl->mutex);
+}
+
+void pfe_ctrl_resume(struct pfe_ctrl *ctrl)
+{
+	int pe_mask = CLASS_MASK | TMU_MASK;
+
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+	pe_mask |= UTIL_MASK;
+#endif
+	mutex_lock(&ctrl->mutex);
+	pe_start(&pfe->ctrl, pe_mask);
+	mutex_unlock(&ctrl->mutex);
+}
+
+/* PE sync stop.
+ * Stops packet processing for a list of PE's (specified using a bitmask).
+ * The caller must hold ctrl->mutex.
+ *
+ * @param ctrl		Control context
+ * @param pe_mask	Mask of PE id's to stop
+ *
+ */
+int pe_sync_stop(struct pfe_ctrl *ctrl, int pe_mask)
+{
+	struct pe_sync_mailbox *mbox;
+	int pe_stopped = 0;
+	unsigned long end = jiffies + 2;
+	int i;
+
+	pe_mask &= 0x2FF;  /*Exclude Util + TMU2 */
+
+	for (i = 0; i < MAX_PE; i++)
+		if (pe_mask & (1 << i)) {
+			mbox = (void *)ctrl->sync_mailbox_baseaddr[i];
+
+			pe_dmem_write(i, cpu_to_be32(0x1), (unsigned
+					long)&mbox->stop, 4);
+		}
+
+	while (pe_stopped != pe_mask) {
+		for (i = 0; i < MAX_PE; i++)
+			if ((pe_mask & (1 << i)) && !(pe_stopped & (1 << i))) {
+				mbox = (void *)ctrl->sync_mailbox_baseaddr[i];
+
+				if (pe_dmem_read(i, (unsigned
+					long)&mbox->stopped, 4) &
+					cpu_to_be32(0x1))
+					pe_stopped |= (1 << i);
+			}
+
+		if (relax(end) < 0)
+			goto err;
+	}
+
+	return 0;
+
+err:
+	pr_err("%s: timeout, %x %x\n", __func__, pe_mask, pe_stopped);
+
+	for (i = 0; i < MAX_PE; i++)
+		if (pe_mask & (1 << i)) {
+			mbox = (void *)ctrl->sync_mailbox_baseaddr[i];
+
+			pe_dmem_write(i, cpu_to_be32(0x0), (unsigned
+					long)&mbox->stop, 4);
+	}
+
+	return -EIO;
+}
+
+/* PE start.
+ * Starts packet processing for a list of PE's (specified using a bitmask).
+ * The caller must hold ctrl->mutex.
+ *
+ * @param ctrl		Control context
+ * @param pe_mask	Mask of PE id's to start
+ *
+ */
+void pe_start(struct pfe_ctrl *ctrl, int pe_mask)
+{
+	struct pe_sync_mailbox *mbox;
+	int i;
+
+	for (i = 0; i < MAX_PE; i++)
+		if (pe_mask & (1 << i)) {
+			mbox = (void *)ctrl->sync_mailbox_baseaddr[i];
+
+			pe_dmem_write(i, cpu_to_be32(0x0), (unsigned
+					long)&mbox->stop, 4);
+		}
+}
+
+/* This function will ensure all PEs are put in to idle state */
+int pe_reset_all(struct pfe_ctrl *ctrl)
+{
+	struct pe_sync_mailbox *mbox;
+	int pe_stopped = 0;
+	unsigned long end = jiffies + 2;
+	int i;
+	int pe_mask  = CLASS_MASK | TMU_MASK;
+
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+	pe_mask |= UTIL_MASK;
+#endif
+
+	for (i = 0; i < MAX_PE; i++)
+		if (pe_mask & (1 << i)) {
+			mbox = (void *)ctrl->sync_mailbox_baseaddr[i];
+
+			pe_dmem_write(i, cpu_to_be32(0x2), (unsigned
+					long)&mbox->stop, 4);
+		}
+
+	while (pe_stopped != pe_mask) {
+		for (i = 0; i < MAX_PE; i++)
+			if ((pe_mask & (1 << i)) && !(pe_stopped & (1 << i))) {
+				mbox = (void *)ctrl->sync_mailbox_baseaddr[i];
+
+				if (pe_dmem_read(i, (unsigned long)
+							&mbox->stopped, 4) &
+						cpu_to_be32(0x1))
+					pe_stopped |= (1 << i);
+			}
+
+		if (relax(end) < 0)
+			goto err;
+	}
+
+	return 0;
+
+err:
+	pr_err("%s: timeout, %x %x\n", __func__, pe_mask, pe_stopped);
+	return -EIO;
+}
+
+int pfe_ctrl_init(struct pfe *pfe)
+{
+	struct pfe_ctrl *ctrl = &pfe->ctrl;
+	int id;
+
+	pr_info("%s\n", __func__);
+
+	mutex_init(&ctrl->mutex);
+	spin_lock_init(&ctrl->lock);
+
+	for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) {
+		ctrl->sync_mailbox_baseaddr[id] = CLASS_DM_SYNC_MBOX;
+		ctrl->msg_mailbox_baseaddr[id] = CLASS_DM_MSG_MBOX;
+	}
+
+	for (id = TMU0_ID; id <= TMU_MAX_ID; id++) {
+		if (id == TMU2_ID)
+			continue;
+		ctrl->sync_mailbox_baseaddr[id] = TMU_DM_SYNC_MBOX;
+		ctrl->msg_mailbox_baseaddr[id] = TMU_DM_MSG_MBOX;
+	}
+
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+	ctrl->sync_mailbox_baseaddr[UTIL_ID] = UTIL_DM_SYNC_MBOX;
+	ctrl->msg_mailbox_baseaddr[UTIL_ID] = UTIL_DM_MSG_MBOX;
+#endif
+
+	ctrl->hash_array_baseaddr = pfe->ddr_baseaddr + ROUTE_TABLE_BASEADDR;
+	ctrl->hash_array_phys_baseaddr = pfe->ddr_phys_baseaddr +
+						ROUTE_TABLE_BASEADDR;
+
+	ctrl->dev = pfe->dev;
+
+	pr_info("%s finished\n", __func__);
+
+	return 0;
+}
+
+void pfe_ctrl_exit(struct pfe *pfe)
+{
+	pr_info("%s\n", __func__);
+}
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_ctrl.h
@@ -0,0 +1,100 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#ifndef _PFE_CTRL_H_
+#define _PFE_CTRL_H_
+
+#include <linux/dmapool.h>
+
+#include "pfe/pfe.h"
+
+#define DMA_BUF_SIZE_128	0x80	/* enough for 1 conntracks */
+#define DMA_BUF_SIZE_256	0x100
+/* enough for 2 conntracks, 1 bridge entry or 1 multicast entry */
+#define DMA_BUF_SIZE_512	0x200
+/* 512bytes dma allocated buffers used by rtp relay feature */
+#define DMA_BUF_MIN_ALIGNMENT	8
+#define DMA_BUF_BOUNDARY	(4 * 1024)
+/* bursts can not cross 4k boundary */
+
+#define CMD_TX_ENABLE	0x0501
+#define CMD_TX_DISABLE	0x0502
+
+#define CMD_RX_LRO		0x0011
+#define CMD_PKTCAP_ENABLE       0x0d01
+#define CMD_QM_EXPT_RATE	0x020c
+
+#define CLASS_DM_SH_STATIC		(0x800)
+#define CLASS_DM_CPU_TICKS		(CLASS_DM_SH_STATIC)
+#define CLASS_DM_SYNC_MBOX		(0x808)
+#define CLASS_DM_MSG_MBOX		(0x810)
+#define CLASS_DM_DROP_CNTR		(0x820)
+#define CLASS_DM_RESUME			(0x854)
+#define CLASS_DM_PESTATUS		(0x860)
+#define CLASS_DM_CRC_VALIDATED		(0x14b0)
+
+#define TMU_DM_SH_STATIC		(0x80)
+#define TMU_DM_CPU_TICKS		(TMU_DM_SH_STATIC)
+#define TMU_DM_SYNC_MBOX		(0x88)
+#define TMU_DM_MSG_MBOX			(0x90)
+#define TMU_DM_RESUME			(0xA0)
+#define TMU_DM_PESTATUS			(0xB0)
+#define TMU_DM_CONTEXT			(0x300)
+#define TMU_DM_TX_TRANS			(0x480)
+
+#define UTIL_DM_SH_STATIC		(0x0)
+#define UTIL_DM_CPU_TICKS		(UTIL_DM_SH_STATIC)
+#define UTIL_DM_SYNC_MBOX		(0x8)
+#define UTIL_DM_MSG_MBOX		(0x10)
+#define UTIL_DM_DROP_CNTR		(0x20)
+#define UTIL_DM_RESUME			(0x40)
+#define UTIL_DM_PESTATUS		(0x50)
+
+struct pfe_ctrl {
+	struct mutex mutex; /* to serialize pfe control access */
+	spinlock_t lock;
+
+	void *dma_pool;
+	void *dma_pool_512;
+	void *dma_pool_128;
+
+	struct device *dev;
+
+	void *hash_array_baseaddr;		/*
+						 * Virtual base address of
+						 * the conntrack hash array
+						 */
+	unsigned long hash_array_phys_baseaddr; /*
+						 * Physical base address of
+						 * the conntrack hash array
+						 */
+
+	int (*event_cb)(u16, u16, u16*);
+
+	unsigned long sync_mailbox_baseaddr[MAX_PE]; /*
+						      * Sync mailbox PFE
+						      * internal address,
+						      * initialized
+						      * when parsing elf images
+						      */
+	unsigned long msg_mailbox_baseaddr[MAX_PE]; /*
+						     * Msg mailbox PFE internal
+						     * address, initialized
+						     * when parsing elf images
+						     */
+	unsigned int sys_clk;			/* AXI clock value, in KHz */
+};
+
+int pfe_ctrl_init(struct pfe *pfe);
+void pfe_ctrl_exit(struct pfe *pfe);
+int pe_sync_stop(struct pfe_ctrl *ctrl, int pe_mask);
+void pe_start(struct pfe_ctrl *ctrl, int pe_mask);
+int pe_reset_all(struct pfe_ctrl *ctrl);
+void pfe_ctrl_suspend(struct pfe_ctrl *ctrl);
+void pfe_ctrl_resume(struct pfe_ctrl *ctrl);
+int relax(unsigned long end);
+
+#endif /* _PFE_CTRL_H_ */
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_debugfs.c
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/platform_device.h>
+
+#include "pfe_mod.h"
+
+static int dmem_show(struct seq_file *s, void *unused)
+{
+	u32 dmem_addr, val;
+	int id = (long int)s->private;
+	int i;
+
+	for (dmem_addr = 0; dmem_addr < CLASS_DMEM_SIZE; dmem_addr += 8 * 4) {
+		seq_printf(s, "%04x:", dmem_addr);
+
+		for (i = 0; i < 8; i++) {
+			val = pe_dmem_read(id, dmem_addr + i * 4, 4);
+			seq_printf(s, " %02x %02x %02x %02x", val & 0xff,
+				   (val >> 8) & 0xff, (val >> 16) & 0xff,
+				   (val >> 24) & 0xff);
+		}
+
+		seq_puts(s, "\n");
+	}
+
+	return 0;
+}
+
+static int dmem_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dmem_show, inode->i_private);
+}
+
+static const struct file_operations dmem_fops = {
+	.open		= dmem_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+int pfe_debugfs_init(struct pfe *pfe)
+{
+	struct dentry *d;
+
+	pr_info("%s\n", __func__);
+
+	pfe->dentry = debugfs_create_dir("pfe", NULL);
+	if (IS_ERR_OR_NULL(pfe->dentry))
+		goto err_dir;
+
+	d = debugfs_create_file("pe0_dmem", 0444, pfe->dentry, (void *)0,
+				&dmem_fops);
+	if (IS_ERR_OR_NULL(d))
+		goto err_pe;
+
+	d = debugfs_create_file("pe1_dmem", 0444, pfe->dentry, (void *)1,
+				&dmem_fops);
+	if (IS_ERR_OR_NULL(d))
+		goto err_pe;
+
+	d = debugfs_create_file("pe2_dmem", 0444, pfe->dentry, (void *)2,
+				&dmem_fops);
+	if (IS_ERR_OR_NULL(d))
+		goto err_pe;
+
+	d = debugfs_create_file("pe3_dmem", 0444, pfe->dentry, (void *)3,
+				&dmem_fops);
+	if (IS_ERR_OR_NULL(d))
+		goto err_pe;
+
+	d = debugfs_create_file("pe4_dmem", 0444, pfe->dentry, (void *)4,
+				&dmem_fops);
+	if (IS_ERR_OR_NULL(d))
+		goto err_pe;
+
+	d = debugfs_create_file("pe5_dmem", 0444, pfe->dentry, (void *)5,
+				&dmem_fops);
+	if (IS_ERR_OR_NULL(d))
+		goto err_pe;
+
+	return 0;
+
+err_pe:
+	debugfs_remove_recursive(pfe->dentry);
+
+err_dir:
+	return -1;
+}
+
+void pfe_debugfs_exit(struct pfe *pfe)
+{
+	debugfs_remove_recursive(pfe->dentry);
+}
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_debugfs.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#ifndef _PFE_DEBUGFS_H_
+#define _PFE_DEBUGFS_H_
+
+int pfe_debugfs_init(struct pfe *pfe);
+void pfe_debugfs_exit(struct pfe *pfe);
+
+#endif /* _PFE_DEBUGFS_H_ */
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_eth.c
@@ -0,0 +1,2550 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+/* @pfe_eth.c.
+ *  Ethernet driver for to handle exception path for PFE.
+ *  - uses HIF functions to send/receive packets.
+ *  - uses ctrl function to start/stop interfaces.
+ *  - uses direct register accesses to control phy operation.
+ */
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/timer.h>
+#include <linux/hrtimer.h>
+#include <linux/platform_device.h>
+
+#include <net/ip.h>
+#include <net/sock.h>
+
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <linux/delay.h>
+#include <linux/regmap.h>
+#include <linux/i2c.h>
+#include <linux/sys_soc.h>
+
+#if defined(CONFIG_NF_CONNTRACK_MARK)
+#include <net/netfilter/nf_conntrack.h>
+#endif
+
+#include "pfe_mod.h"
+#include "pfe_eth.h"
+#include "pfe_cdev.h"
+
+#define LS1012A_REV_1_0		0x87040010
+
+bool pfe_use_old_dts_phy;
+bool pfe_errata_a010897;
+
+static void *cbus_emac_base[3];
+static void *cbus_gpi_base[3];
+
+/* Forward Declaration */
+static void pfe_eth_exit_one(struct pfe_eth_priv_s *priv);
+static void pfe_eth_flush_tx(struct pfe_eth_priv_s *priv);
+static void pfe_eth_flush_txQ(struct pfe_eth_priv_s *priv, int tx_q_num, int
+				from_tx, int n_desc);
+
+/* MDIO registers */
+#define MDIO_SGMII_CR			0x00
+#define MDIO_SGMII_SR			0x01
+#define MDIO_SGMII_DEV_ABIL_SGMII	0x04
+#define MDIO_SGMII_LINK_TMR_L		0x12
+#define MDIO_SGMII_LINK_TMR_H		0x13
+#define MDIO_SGMII_IF_MODE		0x14
+
+/* SGMII Control defines */
+#define SGMII_CR_RST			0x8000
+#define SGMII_CR_AN_EN			0x1000
+#define SGMII_CR_RESTART_AN		0x0200
+#define SGMII_CR_FD			0x0100
+#define SGMII_CR_SPEED_SEL1_1G		0x0040
+#define SGMII_CR_DEF_VAL		(SGMII_CR_AN_EN | SGMII_CR_FD | \
+					 SGMII_CR_SPEED_SEL1_1G)
+
+/* SGMII IF Mode */
+#define SGMII_DUPLEX_HALF		0x10
+#define SGMII_SPEED_10MBPS		0x00
+#define SGMII_SPEED_100MBPS		0x04
+#define SGMII_SPEED_1GBPS		0x08
+#define SGMII_USE_SGMII_AN		0x02
+#define SGMII_EN			0x01
+
+/* SGMII Device Ability for SGMII */
+#define SGMII_DEV_ABIL_ACK		0x4000
+#define SGMII_DEV_ABIL_EEE_CLK_STP_EN	0x0100
+#define SGMII_DEV_ABIL_SGMII		0x0001
+
+unsigned int gemac_regs[] = {
+	0x0004, /* Interrupt event */
+	0x0008, /* Interrupt mask */
+	0x0024, /* Ethernet control */
+	0x0064, /* MIB Control/Status */
+	0x0084, /* Receive control/status */
+	0x00C4, /* Transmit control */
+	0x00E4, /* Physical address low */
+	0x00E8, /* Physical address high */
+	0x0144, /* Transmit FIFO Watermark and Store and Forward Control*/
+	0x0190, /* Receive FIFO Section Full Threshold */
+	0x01A0, /* Transmit FIFO Section Empty Threshold */
+	0x01B0, /* Frame Truncation Length */
+};
+
+const struct soc_device_attribute ls1012a_rev1_soc_attr[] = {
+	{ .family = "QorIQ LS1012A",
+	  .soc_id = "svr:0x87040010",
+	  .revision = "1.0",
+	  .data = NULL },
+	{ },
+};
+
+/********************************************************************/
+/*                   SYSFS INTERFACE				    */
+/********************************************************************/
+
+#ifdef PFE_ETH_NAPI_STATS
+/*
+ * pfe_eth_show_napi_stats
+ */
+static ssize_t pfe_eth_show_napi_stats(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev));
+	ssize_t len = 0;
+
+	len += sprintf(buf + len, "sched:  %u\n",
+			priv->napi_counters[NAPI_SCHED_COUNT]);
+	len += sprintf(buf + len, "poll:   %u\n",
+			priv->napi_counters[NAPI_POLL_COUNT]);
+	len += sprintf(buf + len, "packet: %u\n",
+			priv->napi_counters[NAPI_PACKET_COUNT]);
+	len += sprintf(buf + len, "budget: %u\n",
+			priv->napi_counters[NAPI_FULL_BUDGET_COUNT]);
+	len += sprintf(buf + len, "desc:   %u\n",
+			priv->napi_counters[NAPI_DESC_COUNT]);
+
+	return len;
+}
+
+/*
+ * pfe_eth_set_napi_stats
+ */
+static ssize_t pfe_eth_set_napi_stats(struct device *dev,
+				      struct device_attribute *attr,
+				      const char *buf, size_t count)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev));
+
+	memset(priv->napi_counters, 0, sizeof(priv->napi_counters));
+
+	return count;
+}
+#endif
+#ifdef PFE_ETH_TX_STATS
+/* pfe_eth_show_tx_stats
+ *
+ */
+static ssize_t pfe_eth_show_tx_stats(struct device *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev));
+	ssize_t len = 0;
+	int i;
+
+	len += sprintf(buf + len, "TX queues stats:\n");
+
+	for (i = 0; i < emac_txq_cnt; i++) {
+		struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev,
+									i);
+
+		len += sprintf(buf + len, "\n");
+		__netif_tx_lock_bh(tx_queue);
+
+		hif_tx_lock(&pfe->hif);
+		len += sprintf(buf + len,
+				"Queue %2d :  credits               = %10d\n"
+				, i, hif_lib_tx_credit_avail(pfe, priv->id, i));
+		len += sprintf(buf + len,
+				 "            tx packets            = %10d\n"
+				,  pfe->tmu_credit.tx_packets[priv->id][i]);
+		hif_tx_unlock(&pfe->hif);
+
+		/* Don't output additionnal stats if queue never used */
+		if (!pfe->tmu_credit.tx_packets[priv->id][i])
+			goto skip;
+
+		len += sprintf(buf + len,
+				 "            clean_fail            = %10d\n"
+				, priv->clean_fail[i]);
+		len += sprintf(buf + len,
+				 "            stop_queue            = %10d\n"
+				, priv->stop_queue_total[i]);
+		len += sprintf(buf + len,
+				 "            stop_queue_hif        = %10d\n"
+				, priv->stop_queue_hif[i]);
+		len += sprintf(buf + len,
+				"            stop_queue_hif_client = %10d\n"
+				, priv->stop_queue_hif_client[i]);
+		len += sprintf(buf + len,
+				 "            stop_queue_credit     = %10d\n"
+				, priv->stop_queue_credit[i]);
+skip:
+		__netif_tx_unlock_bh(tx_queue);
+	}
+	return len;
+}
+
+/* pfe_eth_set_tx_stats
+ *
+ */
+static ssize_t pfe_eth_set_tx_stats(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev));
+	int i;
+
+	for (i = 0; i < emac_txq_cnt; i++) {
+		struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev,
+									i);
+
+		__netif_tx_lock_bh(tx_queue);
+		priv->clean_fail[i] = 0;
+		priv->stop_queue_total[i] = 0;
+		priv->stop_queue_hif[i] = 0;
+		priv->stop_queue_hif_client[i] = 0;
+		priv->stop_queue_credit[i] = 0;
+		__netif_tx_unlock_bh(tx_queue);
+	}
+
+	return count;
+}
+#endif
+/* pfe_eth_show_txavail
+ *
+ */
+static ssize_t pfe_eth_show_txavail(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev));
+	ssize_t len = 0;
+	int i;
+
+	for (i = 0; i < emac_txq_cnt; i++) {
+		struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev,
+									i);
+
+		__netif_tx_lock_bh(tx_queue);
+
+		len += sprintf(buf + len, "%d",
+				hif_lib_tx_avail(&priv->client, i));
+
+		__netif_tx_unlock_bh(tx_queue);
+
+		if (i == (emac_txq_cnt - 1))
+			len += sprintf(buf + len, "\n");
+		else
+			len += sprintf(buf + len, " ");
+	}
+
+	return len;
+}
+
+/* pfe_eth_show_default_priority
+ *
+ */
+static ssize_t pfe_eth_show_default_priority(struct device *dev,
+					     struct device_attribute *attr,
+						char *buf)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev));
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	rc = sprintf(buf, "%d\n", priv->default_priority);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return rc;
+}
+
+/* pfe_eth_set_default_priority
+ *
+ */
+
+static ssize_t pfe_eth_set_default_priority(struct device *dev,
+					    struct device_attribute *attr,
+					    const char *buf, size_t count)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev));
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->default_priority = kstrtoul(buf, 0, 0);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return count;
+}
+
+static DEVICE_ATTR(txavail, 0444, pfe_eth_show_txavail, NULL);
+static DEVICE_ATTR(default_priority, 0644, pfe_eth_show_default_priority,
+			pfe_eth_set_default_priority);
+
+#ifdef PFE_ETH_NAPI_STATS
+static DEVICE_ATTR(napi_stats, 0644, pfe_eth_show_napi_stats,
+			pfe_eth_set_napi_stats);
+#endif
+
+#ifdef PFE_ETH_TX_STATS
+static DEVICE_ATTR(tx_stats, 0644, pfe_eth_show_tx_stats,
+			pfe_eth_set_tx_stats);
+#endif
+
+/*
+ * pfe_eth_sysfs_init
+ *
+ */
+static int pfe_eth_sysfs_init(struct net_device *ndev)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+	int err;
+
+	/* Initialize the default values */
+
+	/*
+	 * By default, packets without conntrack will use this default low
+	 * priority queue
+	 */
+	priv->default_priority = 0;
+
+	/* Create our sysfs files */
+	err = device_create_file(&ndev->dev, &dev_attr_default_priority);
+	if (err) {
+		netdev_err(ndev,
+			   "failed to create default_priority sysfs files\n");
+		goto err_priority;
+	}
+
+	err = device_create_file(&ndev->dev, &dev_attr_txavail);
+	if (err) {
+		netdev_err(ndev,
+			   "failed to create default_priority sysfs files\n");
+		goto err_txavail;
+	}
+
+#ifdef PFE_ETH_NAPI_STATS
+	err = device_create_file(&ndev->dev, &dev_attr_napi_stats);
+	if (err) {
+		netdev_err(ndev, "failed to create napi stats sysfs files\n");
+		goto err_napi;
+	}
+#endif
+
+#ifdef PFE_ETH_TX_STATS
+	err = device_create_file(&ndev->dev, &dev_attr_tx_stats);
+	if (err) {
+		netdev_err(ndev, "failed to create tx stats sysfs files\n");
+		goto err_tx;
+	}
+#endif
+
+	return 0;
+
+#ifdef PFE_ETH_TX_STATS
+err_tx:
+#endif
+#ifdef PFE_ETH_NAPI_STATS
+	device_remove_file(&ndev->dev, &dev_attr_napi_stats);
+
+err_napi:
+#endif
+	device_remove_file(&ndev->dev, &dev_attr_txavail);
+
+err_txavail:
+	device_remove_file(&ndev->dev, &dev_attr_default_priority);
+
+err_priority:
+	return -1;
+}
+
+/* pfe_eth_sysfs_exit
+ *
+ */
+static void pfe_eth_sysfs_exit(struct net_device *ndev)
+{
+#ifdef PFE_ETH_TX_STATS
+	device_remove_file(&ndev->dev, &dev_attr_tx_stats);
+#endif
+
+#ifdef PFE_ETH_NAPI_STATS
+	device_remove_file(&ndev->dev, &dev_attr_napi_stats);
+#endif
+	device_remove_file(&ndev->dev, &dev_attr_txavail);
+	device_remove_file(&ndev->dev, &dev_attr_default_priority);
+}
+
+/*************************************************************************/
+/*		ETHTOOL INTERCAE					 */
+/*************************************************************************/
+
+/*MTIP GEMAC */
+static const struct fec_stat {
+	char name[ETH_GSTRING_LEN];
+	u16 offset;
+} fec_stats[] = {
+	/* RMON TX */
+	{ "tx_dropped", RMON_T_DROP },
+	{ "tx_packets", RMON_T_PACKETS },
+	{ "tx_broadcast", RMON_T_BC_PKT },
+	{ "tx_multicast", RMON_T_MC_PKT },
+	{ "tx_crc_errors", RMON_T_CRC_ALIGN },
+	{ "tx_undersize", RMON_T_UNDERSIZE },
+	{ "tx_oversize", RMON_T_OVERSIZE },
+	{ "tx_fragment", RMON_T_FRAG },
+	{ "tx_jabber", RMON_T_JAB },
+	{ "tx_collision", RMON_T_COL },
+	{ "tx_64byte", RMON_T_P64 },
+	{ "tx_65to127byte", RMON_T_P65TO127 },
+	{ "tx_128to255byte", RMON_T_P128TO255 },
+	{ "tx_256to511byte", RMON_T_P256TO511 },
+	{ "tx_512to1023byte", RMON_T_P512TO1023 },
+	{ "tx_1024to2047byte", RMON_T_P1024TO2047 },
+	{ "tx_GTE2048byte", RMON_T_P_GTE2048 },
+	{ "tx_octets", RMON_T_OCTETS },
+
+	/* IEEE TX */
+	{ "IEEE_tx_drop", IEEE_T_DROP },
+	{ "IEEE_tx_frame_ok", IEEE_T_FRAME_OK },
+	{ "IEEE_tx_1col", IEEE_T_1COL },
+	{ "IEEE_tx_mcol", IEEE_T_MCOL },
+	{ "IEEE_tx_def", IEEE_T_DEF },
+	{ "IEEE_tx_lcol", IEEE_T_LCOL },
+	{ "IEEE_tx_excol", IEEE_T_EXCOL },
+	{ "IEEE_tx_macerr", IEEE_T_MACERR },
+	{ "IEEE_tx_cserr", IEEE_T_CSERR },
+	{ "IEEE_tx_sqe", IEEE_T_SQE },
+	{ "IEEE_tx_fdxfc", IEEE_T_FDXFC },
+	{ "IEEE_tx_octets_ok", IEEE_T_OCTETS_OK },
+
+	/* RMON RX */
+	{ "rx_packets", RMON_R_PACKETS },
+	{ "rx_broadcast", RMON_R_BC_PKT },
+	{ "rx_multicast", RMON_R_MC_PKT },
+	{ "rx_crc_errors", RMON_R_CRC_ALIGN },
+	{ "rx_undersize", RMON_R_UNDERSIZE },
+	{ "rx_oversize", RMON_R_OVERSIZE },
+	{ "rx_fragment", RMON_R_FRAG },
+	{ "rx_jabber", RMON_R_JAB },
+	{ "rx_64byte", RMON_R_P64 },
+	{ "rx_65to127byte", RMON_R_P65TO127 },
+	{ "rx_128to255byte", RMON_R_P128TO255 },
+	{ "rx_256to511byte", RMON_R_P256TO511 },
+	{ "rx_512to1023byte", RMON_R_P512TO1023 },
+	{ "rx_1024to2047byte", RMON_R_P1024TO2047 },
+	{ "rx_GTE2048byte", RMON_R_P_GTE2048 },
+	{ "rx_octets", RMON_R_OCTETS },
+
+	/* IEEE RX */
+	{ "IEEE_rx_drop", IEEE_R_DROP },
+	{ "IEEE_rx_frame_ok", IEEE_R_FRAME_OK },
+	{ "IEEE_rx_crc", IEEE_R_CRC },
+	{ "IEEE_rx_align", IEEE_R_ALIGN },
+	{ "IEEE_rx_macerr", IEEE_R_MACERR },
+	{ "IEEE_rx_fdxfc", IEEE_R_FDXFC },
+	{ "IEEE_rx_octets_ok", IEEE_R_OCTETS_OK },
+};
+
+static void pfe_eth_fill_stats(struct net_device *ndev, struct ethtool_stats
+				*stats, u64 *data)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+	int i;
+	u64 pfe_crc_validated = 0;
+	int id;
+
+	for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) {
+		pfe_crc_validated += be32_to_cpu(pe_dmem_read(id,
+			CLASS_DM_CRC_VALIDATED + (priv->id * 4), 4));
+	}
+
+	for (i = 0; i < ARRAY_SIZE(fec_stats); i++) {
+		data[i] = readl(priv->EMAC_baseaddr + fec_stats[i].offset);
+
+		if (fec_stats[i].offset == IEEE_R_DROP)
+			data[i] -= pfe_crc_validated;
+	}
+}
+
+static void pfe_eth_gstrings(struct net_device *netdev,
+			     u32 stringset, u8 *data)
+{
+	int i;
+
+	switch (stringset) {
+	case ETH_SS_STATS:
+		for (i = 0; i < ARRAY_SIZE(fec_stats); i++)
+			memcpy(data + i * ETH_GSTRING_LEN,
+			       fec_stats[i].name, ETH_GSTRING_LEN);
+		break;
+	}
+}
+
+static int pfe_eth_stats_count(struct net_device *ndev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_STATS:
+		return ARRAY_SIZE(fec_stats);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+/*
+ * pfe_eth_gemac_reglen - Return the length of the register structure.
+ *
+ */
+static int pfe_eth_gemac_reglen(struct net_device *ndev)
+{
+	pr_info("%s()\n", __func__);
+	return (sizeof(gemac_regs) / sizeof(u32));
+}
+
+/*
+ * pfe_eth_gemac_get_regs - Return the gemac register structure.
+ *
+ */
+static void  pfe_eth_gemac_get_regs(struct net_device *ndev, struct ethtool_regs
+					*regs, void *regbuf)
+{
+	int i;
+
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+	u32 *buf = (u32 *)regbuf;
+
+	pr_info("%s()\n", __func__);
+	for (i = 0; i < sizeof(gemac_regs) / sizeof(u32); i++)
+		buf[i] = readl(priv->EMAC_baseaddr + gemac_regs[i]);
+}
+
+/*
+ * pfe_eth_set_wol - Set the magic packet option, in WoL register.
+ *
+ */
+static int pfe_eth_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+
+	if (wol->wolopts & ~WAKE_MAGIC)
+		return -EOPNOTSUPP;
+
+	/* for MTIP we store wol->wolopts */
+	priv->wol = wol->wolopts;
+
+	device_set_wakeup_enable(&ndev->dev, wol->wolopts & WAKE_MAGIC);
+
+	return 0;
+}
+
+/*
+ *
+ * pfe_eth_get_wol - Get the WoL options.
+ *
+ */
+static void pfe_eth_get_wol(struct net_device *ndev, struct ethtool_wolinfo
+				*wol)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+
+	wol->supported = WAKE_MAGIC;
+	wol->wolopts = 0;
+
+	if (priv->wol & WAKE_MAGIC)
+		wol->wolopts = WAKE_MAGIC;
+
+	memset(&wol->sopass, 0, sizeof(wol->sopass));
+}
+
+/*
+ * pfe_eth_get_drvinfo -  Fills in the drvinfo structure with some basic info
+ *
+ */
+static void pfe_eth_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo
+				*drvinfo)
+{
+	strscpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver));
+	strscpy(drvinfo->version, DRV_VERSION, sizeof(drvinfo->version));
+	strscpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
+	strscpy(drvinfo->bus_info, "N/A", sizeof(drvinfo->bus_info));
+}
+
+/*
+ * pfe_eth_set_settings - Used to send commands to PHY.
+ *
+ */
+static int pfe_eth_set_settings(struct net_device *ndev,
+				const struct ethtool_link_ksettings *cmd)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+	struct phy_device *phydev = priv->phydev;
+
+	if (!phydev)
+		return -ENODEV;
+
+	return phy_ethtool_ksettings_set(phydev, cmd);
+}
+
+/*
+ * pfe_eth_getsettings - Return the current settings in the ethtool_cmd
+ * structure.
+ *
+ */
+static int pfe_eth_get_settings(struct net_device *ndev,
+				struct ethtool_link_ksettings *cmd)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+	struct phy_device *phydev = priv->phydev;
+
+	if (!phydev)
+		return -ENODEV;
+
+	phy_ethtool_ksettings_get(phydev, cmd);
+
+	return 0;
+}
+
+/*
+ * pfe_eth_get_msglevel - Gets the debug message mask.
+ *
+ */
+static uint32_t pfe_eth_get_msglevel(struct net_device *ndev)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+
+	return priv->msg_enable;
+}
+
+/*
+ * pfe_eth_set_msglevel - Sets the debug message mask.
+ *
+ */
+static void pfe_eth_set_msglevel(struct net_device *ndev, uint32_t data)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+
+	priv->msg_enable = data;
+}
+
+#define HIF_RX_COAL_MAX_CLKS		(~(1 << 31))
+#define HIF_RX_COAL_CLKS_PER_USEC	(pfe->ctrl.sys_clk / 1000)
+#define HIF_RX_COAL_MAX_USECS		(HIF_RX_COAL_MAX_CLKS	/ \
+						HIF_RX_COAL_CLKS_PER_USEC)
+
+/*
+ * pfe_eth_set_coalesce - Sets rx interrupt coalescing timer.
+ *
+ */
+static int pfe_eth_set_coalesce(struct net_device *ndev,
+				struct ethtool_coalesce *ec,
+				struct kernel_ethtool_coalesce *kernel_coal,
+				struct netlink_ext_ack *extack)
+{
+	if (ec->rx_coalesce_usecs > HIF_RX_COAL_MAX_USECS)
+		return -EINVAL;
+
+	if (!ec->rx_coalesce_usecs) {
+		writel(0, HIF_INT_COAL);
+		return 0;
+	}
+
+	writel((ec->rx_coalesce_usecs * HIF_RX_COAL_CLKS_PER_USEC) |
+			HIF_INT_COAL_ENABLE, HIF_INT_COAL);
+
+	return 0;
+}
+
+/*
+ * pfe_eth_get_coalesce - Gets rx interrupt coalescing timer value.
+ *
+ */
+static int pfe_eth_get_coalesce(struct net_device *ndev,
+				struct ethtool_coalesce *ec,
+				struct kernel_ethtool_coalesce *kernel_coal,
+				struct netlink_ext_ack *extack)
+{
+	int reg_val = readl(HIF_INT_COAL);
+
+	if (reg_val & HIF_INT_COAL_ENABLE)
+		ec->rx_coalesce_usecs = (reg_val & HIF_RX_COAL_MAX_CLKS) /
+						HIF_RX_COAL_CLKS_PER_USEC;
+	else
+		ec->rx_coalesce_usecs = 0;
+
+	return 0;
+}
+
+/*
+ * pfe_eth_set_pauseparam - Sets pause parameters
+ *
+ */
+static int pfe_eth_set_pauseparam(struct net_device *ndev,
+				  struct ethtool_pauseparam *epause)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+
+	if (epause->tx_pause != epause->rx_pause) {
+		netdev_info(ndev,
+			    "hardware only support enable/disable both tx and rx\n");
+		return -EINVAL;
+	}
+
+	priv->pause_flag = 0;
+	priv->pause_flag |= epause->rx_pause ? PFE_PAUSE_FLAG_ENABLE : 0;
+	priv->pause_flag |= epause->autoneg ? PFE_PAUSE_FLAG_AUTONEG : 0;
+
+	if (epause->rx_pause || epause->autoneg) {
+		gemac_enable_pause_rx(priv->EMAC_baseaddr);
+		writel((readl(priv->GPI_baseaddr + GPI_TX_PAUSE_TIME) |
+					EGPI_PAUSE_ENABLE),
+				priv->GPI_baseaddr + GPI_TX_PAUSE_TIME);
+		if (priv->phydev) {
+			linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
+					 priv->phydev->supported);
+			linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+					 priv->phydev->supported);
+			linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
+					 priv->phydev->advertising);
+			linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+					 priv->phydev->advertising);
+		}
+	} else {
+		gemac_disable_pause_rx(priv->EMAC_baseaddr);
+		writel((readl(priv->GPI_baseaddr + GPI_TX_PAUSE_TIME) &
+					~EGPI_PAUSE_ENABLE),
+				priv->GPI_baseaddr + GPI_TX_PAUSE_TIME);
+		if (priv->phydev) {
+			linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT,
+					   priv->phydev->supported);
+			linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+					   priv->phydev->supported);
+			linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT,
+					   priv->phydev->advertising);
+			linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+					   priv->phydev->advertising);
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * pfe_eth_get_pauseparam - Gets pause parameters
+ *
+ */
+static void pfe_eth_get_pauseparam(struct net_device *ndev,
+				   struct ethtool_pauseparam *epause)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+
+	epause->autoneg = (priv->pause_flag & PFE_PAUSE_FLAG_AUTONEG) != 0;
+	epause->tx_pause = (priv->pause_flag & PFE_PAUSE_FLAG_ENABLE) != 0;
+	epause->rx_pause = epause->tx_pause;
+}
+
+/*
+ * pfe_eth_get_hash
+ */
+#define PFE_HASH_BITS	6		/* #bits in hash */
+#define CRC32_POLY	0xEDB88320
+
+static int pfe_eth_get_hash(u8 *addr)
+{
+	unsigned int i, bit, data, crc, hash;
+
+	/* calculate crc32 value of mac address */
+	crc = 0xffffffff;
+
+	for (i = 0; i < 6; i++) {
+		data = addr[i];
+		for (bit = 0; bit < 8; bit++, data >>= 1) {
+			crc = (crc >> 1) ^
+				(((crc ^ data) & 1) ? CRC32_POLY : 0);
+		}
+	}
+
+	/*
+	 * only upper 6 bits (PFE_HASH_BITS) are used
+	 * which point to specific bit in the hash registers
+	 */
+	hash = (crc >> (32 - PFE_HASH_BITS)) & 0x3f;
+
+	return hash;
+}
+
+const struct ethtool_ops pfe_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS,
+	.get_drvinfo = pfe_eth_get_drvinfo,
+	.get_regs_len = pfe_eth_gemac_reglen,
+	.get_regs = pfe_eth_gemac_get_regs,
+	.get_link = ethtool_op_get_link,
+	.get_wol  = pfe_eth_get_wol,
+	.set_wol  = pfe_eth_set_wol,
+	.set_pauseparam = pfe_eth_set_pauseparam,
+	.get_pauseparam = pfe_eth_get_pauseparam,
+	.get_strings = pfe_eth_gstrings,
+	.get_sset_count = pfe_eth_stats_count,
+	.get_ethtool_stats = pfe_eth_fill_stats,
+	.get_msglevel = pfe_eth_get_msglevel,
+	.set_msglevel = pfe_eth_set_msglevel,
+	.set_coalesce = pfe_eth_set_coalesce,
+	.get_coalesce = pfe_eth_get_coalesce,
+	.get_link_ksettings = pfe_eth_get_settings,
+	.set_link_ksettings = pfe_eth_set_settings,
+};
+
+/* pfe_eth_mdio_reset
+ */
+int pfe_eth_mdio_reset(struct mii_bus *bus)
+{
+	struct pfe_mdio_priv_s *priv = (struct pfe_mdio_priv_s *)bus->priv;
+	u32 phy_speed;
+
+
+	mutex_lock(&bus->mdio_lock);
+
+	/*
+	 * Set MII speed to 2.5 MHz (= clk_get_rate() / 2 * phy_speed)
+	 *
+	 * The formula for FEC MDC is 'ref_freq / (MII_SPEED x 2)' while
+	 * for ENET-MAC is 'ref_freq / ((MII_SPEED + 1) x 2)'.
+	 */
+	phy_speed = (DIV_ROUND_UP((pfe->ctrl.sys_clk * 1000), 4000000)
+		     << EMAC_MII_SPEED_SHIFT);
+	phy_speed |= EMAC_HOLDTIME(0x5);
+	__raw_writel(phy_speed, priv->mdio_base + EMAC_MII_CTRL_REG);
+
+	mutex_unlock(&bus->mdio_lock);
+
+	return 0;
+}
+
+/* pfe_eth_mdio_timeout
+ *
+ */
+static int pfe_eth_mdio_timeout(struct pfe_mdio_priv_s *priv, int timeout)
+{
+	while (!(__raw_readl(priv->mdio_base + EMAC_IEVENT_REG) &
+			EMAC_IEVENT_MII)) {
+		if (timeout-- <= 0)
+			return -1;
+		usleep_range(10, 20);
+	}
+	__raw_writel(EMAC_IEVENT_MII, priv->mdio_base + EMAC_IEVENT_REG);
+	return 0;
+}
+
+static int pfe_eth_mdio_mux(u8 muxval)
+{
+	struct i2c_adapter *a;
+	struct i2c_msg msg;
+	unsigned char buf[2];
+	int ret;
+
+	a = i2c_get_adapter(0);
+	if (!a)
+		return -ENODEV;
+
+	/* set bit 1 (the second bit) of chip at 0x09, register 0x13 */
+	buf[0] = 0x54; /* reg number */
+	buf[1] = (muxval << 6) | 0x3; /* data */
+	msg.addr = 0x66;
+	msg.buf = buf;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	i2c_put_adapter(a);
+	if (ret != 1)
+		return -ENODEV;
+	return 0;
+}
+
+static int pfe_eth_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
+			      u16 value)
+{
+	struct pfe_mdio_priv_s *priv = (struct pfe_mdio_priv_s *)bus->priv;
+
+	/*To access external PHYs on QDS board mux needs to be configured*/
+	if ((mii_id) && (pfe->mdio_muxval[mii_id]))
+		pfe_eth_mdio_mux(pfe->mdio_muxval[mii_id]);
+
+	/* start a write op */
+	__raw_writel(EMAC_MII_DATA_ST | EMAC_MII_DATA_OP_WR |
+		     EMAC_MII_DATA_PA(mii_id) |
+		     EMAC_MII_DATA_RA(regnum) |
+		     EMAC_MII_DATA_TA | EMAC_MII_DATA(value),
+		     priv->mdio_base + EMAC_MII_DATA_REG);
+
+	if (pfe_eth_mdio_timeout(priv, EMAC_MDIO_TIMEOUT)) {
+		dev_err(&bus->dev, "%s: phy MDIO write timeout\n", __func__);
+		return -1;
+	}
+	return 0;
+}
+
+static int pfe_eth_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+	struct pfe_mdio_priv_s *priv = (struct pfe_mdio_priv_s *)bus->priv;
+	u16 value = 0;
+
+	/*To access external PHYs on QDS board mux needs to be configured*/
+	if ((mii_id) && (pfe->mdio_muxval[mii_id]))
+		pfe_eth_mdio_mux(pfe->mdio_muxval[mii_id]);
+
+	/* start a read op */
+	__raw_writel(EMAC_MII_DATA_ST | EMAC_MII_DATA_OP_RD |
+		     EMAC_MII_DATA_PA(mii_id) |
+		     EMAC_MII_DATA_RA(regnum) |
+		     EMAC_MII_DATA_TA, priv->mdio_base +
+		     EMAC_MII_DATA_REG);
+
+	if (pfe_eth_mdio_timeout(priv, EMAC_MDIO_TIMEOUT)) {
+		dev_err(&bus->dev, "%s: phy MDIO read timeout\n", __func__);
+		return -1;
+	}
+
+	value = EMAC_MII_DATA(__raw_readl(priv->mdio_base +
+						EMAC_MII_DATA_REG));
+	return value;
+}
+
+static int pfe_eth_mdio_init(struct pfe *pfe,
+			     struct ls1012a_pfe_platform_data *pfe_info,
+			     int ii)
+{
+	struct pfe_mdio_priv_s *priv = NULL;
+	struct ls1012a_mdio_platform_data *mdio_info;
+	struct mii_bus *bus;
+	struct device_node *mdio_node;
+	int rc = 0;
+
+	mdio_info = (struct ls1012a_mdio_platform_data *)
+					pfe_info->ls1012a_mdio_pdata;
+	mdio_info->id = ii;
+
+	bus = mdiobus_alloc_size(sizeof(struct pfe_mdio_priv_s));
+	if (!bus) {
+		pr_err("mdiobus_alloc() failed\n");
+		rc = -ENOMEM;
+		goto err_mdioalloc;
+	}
+
+	bus->name = "ls1012a MDIO Bus";
+	snprintf(bus->id, MII_BUS_ID_SIZE, "ls1012a-%x", mdio_info->id);
+
+	bus->read = &pfe_eth_mdio_read;
+	bus->write = &pfe_eth_mdio_write;
+	bus->reset = &pfe_eth_mdio_reset;
+	bus->parent = pfe->dev;
+	bus->phy_mask = mdio_info->phy_mask;
+	bus->irq[0] = mdio_info->irq[0];
+	priv = bus->priv;
+	priv->mdio_base = cbus_emac_base[ii];
+
+	priv->mdc_div = mdio_info->mdc_div;
+	if (!priv->mdc_div)
+		priv->mdc_div = 64;
+
+	dev_info(bus->parent, "%s: mdc_div: %d, phy_mask: %x\n",
+		 __func__, priv->mdc_div, bus->phy_mask);
+	mdio_node = of_get_child_by_name(pfe->dev->of_node, "mdio");
+	if ((mdio_info->id == 0) && mdio_node) {
+		rc = of_mdiobus_register(bus, mdio_node);
+		of_node_put(mdio_node);
+	} else {
+		rc = mdiobus_register(bus);
+	}
+
+	if (rc) {
+		dev_err(bus->parent, "mdiobus_register(%s) failed\n",
+			bus->name);
+		goto err_mdioregister;
+	}
+
+	priv->mii_bus = bus;
+	pfe->mdio.mdio_priv[ii] = priv;
+
+	pfe_eth_mdio_reset(bus);
+
+	return 0;
+
+err_mdioregister:
+	mdiobus_free(bus);
+err_mdioalloc:
+	return rc;
+}
+
+/* pfe_eth_mdio_exit
+ */
+static void pfe_eth_mdio_exit(struct pfe *pfe,
+			      int ii)
+{
+	struct pfe_mdio_priv_s *mdio_priv = pfe->mdio.mdio_priv[ii];
+	struct mii_bus *bus = mdio_priv->mii_bus;
+
+	if (!bus)
+		return;
+	mdiobus_unregister(bus);
+	mdiobus_free(bus);
+}
+
+/* pfe_get_phydev_speed
+ */
+static int pfe_get_phydev_speed(struct phy_device *phydev)
+{
+	switch (phydev->speed) {
+	case 10:
+			return SPEED_10M;
+	case 100:
+			return SPEED_100M;
+	case 1000:
+	default:
+			return SPEED_1000M;
+	}
+}
+
+/* pfe_set_rgmii_speed
+ */
+#define RGMIIPCR	0x434
+/* RGMIIPCR bit definitions*/
+#define SCFG_RGMIIPCR_EN_AUTO           (0x00000008)
+#define SCFG_RGMIIPCR_SETSP_1000M       (0x00000004)
+#define SCFG_RGMIIPCR_SETSP_100M        (0x00000000)
+#define SCFG_RGMIIPCR_SETSP_10M         (0x00000002)
+#define SCFG_RGMIIPCR_SETFD             (0x00000001)
+
+#define MDIOSELCR	0x484
+#define MDIOSEL_SERDES	0x0
+#define MDIOSEL_EXTPHY  0x80000000
+
+static void pfe_set_rgmii_speed(struct phy_device *phydev)
+{
+	u32 rgmii_pcr;
+
+	regmap_read(pfe->scfg, RGMIIPCR, &rgmii_pcr);
+	rgmii_pcr  &= ~(SCFG_RGMIIPCR_SETSP_1000M | SCFG_RGMIIPCR_SETSP_10M);
+
+	switch (phydev->speed) {
+	case 10:
+			rgmii_pcr |= SCFG_RGMIIPCR_SETSP_10M;
+			break;
+	case 1000:
+			rgmii_pcr |= SCFG_RGMIIPCR_SETSP_1000M;
+			break;
+	case 100:
+	default:
+			/* Default is 100M */
+			break;
+	}
+	regmap_write(pfe->scfg, RGMIIPCR, rgmii_pcr);
+}
+
+/* pfe_get_phydev_duplex
+ */
+static int pfe_get_phydev_duplex(struct phy_device *phydev)
+{
+	/*return (phydev->duplex == DUPLEX_HALF) ? DUP_HALF:DUP_FULL ; */
+	return DUPLEX_FULL;
+}
+
+/* pfe_eth_adjust_link
+ */
+static void pfe_eth_adjust_link(struct net_device *ndev)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+	unsigned long flags;
+	struct phy_device *phydev = priv->phydev;
+	int new_state = 0;
+
+	netif_info(priv, drv, ndev, "%s\n", __func__);
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	if (phydev->link) {
+		/*
+		 * Now we make sure that we can be in full duplex mode.
+		 * If not, we operate in half-duplex mode.
+		 */
+		if (phydev->duplex != priv->oldduplex) {
+			new_state = 1;
+			gemac_set_duplex(priv->EMAC_baseaddr,
+					 pfe_get_phydev_duplex(phydev));
+			priv->oldduplex = phydev->duplex;
+		}
+
+		if (phydev->speed != priv->oldspeed) {
+			new_state = 1;
+			gemac_set_speed(priv->EMAC_baseaddr,
+					pfe_get_phydev_speed(phydev));
+			if (priv->einfo->mii_config ==
+					PHY_INTERFACE_MODE_RGMII_ID)
+				pfe_set_rgmii_speed(phydev);
+			priv->oldspeed = phydev->speed;
+		}
+
+		if (!priv->oldlink) {
+			new_state = 1;
+			priv->oldlink = 1;
+		}
+
+	} else if (priv->oldlink) {
+		new_state = 1;
+		priv->oldlink = 0;
+		priv->oldspeed = 0;
+		priv->oldduplex = -1;
+	}
+
+	if (new_state && netif_msg_link(priv))
+		phy_print_status(phydev);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	/* Now, dump the details to the cdev.
+	 * XXX: Locking would be required? (uniprocess arch)
+	 *      Or, maybe move it in spinlock above
+	 */
+	if (us && priv->einfo->gem_id < PFE_CDEV_ETH_COUNT) {
+		pr_debug("Changing link state from (%u) to (%u) for ID=(%u)\n",
+			 link_states[priv->einfo->gem_id].state,
+			 phydev->link,
+			 priv->einfo->gem_id);
+		link_states[priv->einfo->gem_id].phy_id = priv->einfo->gem_id;
+		link_states[priv->einfo->gem_id].state = phydev->link;
+	}
+}
+
+/* pfe_phy_exit
+ */
+static void pfe_phy_exit(struct net_device *ndev)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+
+	netif_info(priv, drv, ndev, "%s\n", __func__);
+
+	phy_disconnect(priv->phydev);
+	priv->phydev = NULL;
+}
+
+/* pfe_eth_stop
+ */
+static void pfe_eth_stop(struct net_device *ndev, int wake)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+
+	netif_info(priv, drv, ndev, "%s\n", __func__);
+
+	if (wake) {
+		gemac_tx_disable(priv->EMAC_baseaddr);
+	} else {
+		gemac_disable(priv->EMAC_baseaddr);
+		gpi_disable(priv->GPI_baseaddr);
+
+		if (priv->phydev)
+			phy_stop(priv->phydev);
+	}
+}
+
+/* pfe_eth_start
+ */
+static int pfe_eth_start(struct pfe_eth_priv_s *priv)
+{
+	netif_info(priv, drv, priv->ndev, "%s\n", __func__);
+
+	if (priv->phydev)
+		phy_start(priv->phydev);
+
+	gpi_enable(priv->GPI_baseaddr);
+	gemac_enable(priv->EMAC_baseaddr);
+
+	return 0;
+}
+
+/*
+ * Configure on chip serdes through mdio
+ */
+static void ls1012a_configure_serdes(struct net_device *ndev)
+{
+	struct pfe_eth_priv_s *eth_priv = netdev_priv(ndev);
+	struct pfe_mdio_priv_s *mdio_priv = pfe->mdio.mdio_priv[eth_priv->id];
+	int sgmii_2500 = 0;
+	struct mii_bus *bus = mdio_priv->mii_bus;
+	u16 value = 0;
+
+	if (eth_priv->einfo->mii_config == PHY_INTERFACE_MODE_2500SGMII)
+		sgmii_2500 = 1;
+
+	netif_info(eth_priv, drv, ndev, "%s\n", __func__);
+	/* PCS configuration done with corresponding GEMAC */
+
+	pfe_eth_mdio_read(bus, 0, MDIO_SGMII_CR);
+	pfe_eth_mdio_read(bus, 0, MDIO_SGMII_SR);
+
+	pfe_eth_mdio_write(bus, 0, MDIO_SGMII_CR, SGMII_CR_RST);
+
+	if (sgmii_2500) {
+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_IF_MODE, SGMII_SPEED_1GBPS
+							       | SGMII_EN);
+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_DEV_ABIL_SGMII,
+				   SGMII_DEV_ABIL_ACK | SGMII_DEV_ABIL_SGMII);
+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_LINK_TMR_L, 0xa120);
+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_LINK_TMR_H, 0x7);
+		/* Autonegotiation need to be disabled for 2.5G SGMII mode*/
+		value = SGMII_CR_FD | SGMII_CR_SPEED_SEL1_1G;
+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_CR, value);
+	} else {
+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_IF_MODE,
+				   SGMII_SPEED_1GBPS
+				   | SGMII_USE_SGMII_AN
+				   | SGMII_EN);
+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_DEV_ABIL_SGMII,
+				   SGMII_DEV_ABIL_EEE_CLK_STP_EN
+				   | 0xa0
+				   | SGMII_DEV_ABIL_SGMII);
+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_LINK_TMR_L, 0x400);
+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_LINK_TMR_H, 0x0);
+		value = SGMII_CR_AN_EN | SGMII_CR_FD | SGMII_CR_SPEED_SEL1_1G;
+		pfe_eth_mdio_write(bus, 0, MDIO_SGMII_CR, value);
+	}
+}
+
+/*
+ * pfe_phy_init
+ *
+ */
+static int pfe_phy_init(struct net_device *ndev)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+	struct phy_device *phydev;
+	char phy_id[MII_BUS_ID_SIZE + 3];
+	char bus_id[MII_BUS_ID_SIZE];
+	phy_interface_t interface;
+
+	priv->oldlink = 0;
+	priv->oldspeed = 0;
+	priv->oldduplex = -1;
+
+	snprintf(bus_id, MII_BUS_ID_SIZE, "ls1012a-%d", 0);
+	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
+		 priv->einfo->phy_id);
+	netif_info(priv, drv, ndev, "%s: %s\n", __func__, phy_id);
+	interface = priv->einfo->mii_config;
+	if ((interface == PHY_INTERFACE_MODE_SGMII) ||
+	    (interface == PHY_INTERFACE_MODE_2500SGMII)) {
+		/*Configure SGMII PCS */
+		if (pfe->scfg) {
+			/* Config MDIO from serdes */
+			regmap_write(pfe->scfg, MDIOSELCR, MDIOSEL_SERDES);
+		}
+		ls1012a_configure_serdes(ndev);
+	}
+
+	if (pfe->scfg) {
+		/*Config MDIO from PAD */
+		regmap_write(pfe->scfg, MDIOSELCR, MDIOSEL_EXTPHY);
+	}
+
+	priv->oldlink = 0;
+	priv->oldspeed = 0;
+	priv->oldduplex = -1;
+	pr_info("%s interface %x\n", __func__, interface);
+
+	if (priv->phy_node) {
+		phydev = of_phy_connect(ndev, priv->phy_node,
+					pfe_eth_adjust_link, 0,
+					priv->einfo->mii_config);
+		if (!(phydev)) {
+			netdev_err(ndev, "Unable to connect to phy\n");
+			return -ENODEV;
+		}
+
+	} else {
+		phydev = phy_connect(ndev, phy_id,
+				     &pfe_eth_adjust_link, interface);
+		if (IS_ERR(phydev)) {
+			netdev_err(ndev, "Unable to connect to phy\n");
+			return PTR_ERR(phydev);
+		}
+	}
+
+	priv->phydev = phydev;
+	phydev->irq = PHY_POLL;
+
+	return 0;
+}
+
+/* pfe_gemac_init
+ */
+static int pfe_gemac_init(struct pfe_eth_priv_s *priv)
+{
+	struct gemac_cfg cfg;
+
+	netif_info(priv, ifup, priv->ndev, "%s\n", __func__);
+
+	cfg.mode = 0;
+	cfg.speed = SPEED_1000M;
+	cfg.duplex = DUPLEX_FULL;
+
+	gemac_set_config(priv->EMAC_baseaddr, &cfg);
+	gemac_allow_broadcast(priv->EMAC_baseaddr);
+	gemac_enable_1536_rx(priv->EMAC_baseaddr);
+	gemac_enable_stacked_vlan(priv->EMAC_baseaddr);
+	gemac_enable_pause_rx(priv->EMAC_baseaddr);
+	gemac_set_bus_width(priv->EMAC_baseaddr, 64);
+
+	/*GEM will perform checksum verifications*/
+	if (priv->ndev->features & NETIF_F_RXCSUM)
+		gemac_enable_rx_checksum_offload(priv->EMAC_baseaddr);
+	else
+		gemac_disable_rx_checksum_offload(priv->EMAC_baseaddr);
+
+	return 0;
+}
+
+/* pfe_eth_event_handler
+ */
+static int pfe_eth_event_handler(void *data, int event, int qno)
+{
+	struct pfe_eth_priv_s *priv = data;
+
+	switch (event) {
+	case EVENT_RX_PKT_IND:
+
+		if (qno == 0) {
+			if (napi_schedule_prep(&priv->high_napi)) {
+				netif_info(priv, intr, priv->ndev,
+					   "%s: schedule high prio poll\n"
+					   , __func__);
+
+#ifdef PFE_ETH_NAPI_STATS
+				priv->napi_counters[NAPI_SCHED_COUNT]++;
+#endif
+
+				__napi_schedule(&priv->high_napi);
+			}
+		} else if (qno == 1) {
+			if (napi_schedule_prep(&priv->low_napi)) {
+				netif_info(priv, intr, priv->ndev,
+					   "%s: schedule low prio poll\n"
+					   , __func__);
+
+#ifdef PFE_ETH_NAPI_STATS
+				priv->napi_counters[NAPI_SCHED_COUNT]++;
+#endif
+				__napi_schedule(&priv->low_napi);
+			}
+		} else if (qno == 2) {
+			if (napi_schedule_prep(&priv->lro_napi)) {
+				netif_info(priv, intr, priv->ndev,
+					   "%s: schedule lro prio poll\n"
+					   , __func__);
+
+#ifdef PFE_ETH_NAPI_STATS
+				priv->napi_counters[NAPI_SCHED_COUNT]++;
+#endif
+				__napi_schedule(&priv->lro_napi);
+			}
+		}
+
+		break;
+
+	case EVENT_TXDONE_IND:
+		pfe_eth_flush_tx(priv);
+		hif_lib_event_handler_start(&priv->client, EVENT_TXDONE_IND, 0);
+		break;
+	case EVENT_HIGH_RX_WM:
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int pfe_eth_change_mtu(struct net_device *ndev, int new_mtu)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+
+	ndev->mtu = new_mtu;
+	new_mtu += ETH_HLEN + ETH_FCS_LEN;
+	gemac_set_rx_max_fl(priv->EMAC_baseaddr, new_mtu);
+
+	return 0;
+}
+
+/* pfe_eth_open
+ */
+static int pfe_eth_open(struct net_device *ndev)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+	struct hif_client_s *client;
+	int rc;
+
+	netif_info(priv, ifup, ndev, "%s\n", __func__);
+
+	/* Register client driver with HIF */
+	client = &priv->client;
+	memset(client, 0, sizeof(*client));
+	client->id = PFE_CL_GEM0 + priv->id;
+	client->tx_qn = emac_txq_cnt;
+	client->rx_qn = EMAC_RXQ_CNT;
+	client->priv = priv;
+	client->pfe = priv->pfe;
+	client->event_handler = pfe_eth_event_handler;
+
+	client->tx_qsize = EMAC_TXQ_DEPTH;
+	client->rx_qsize = EMAC_RXQ_DEPTH;
+
+	rc = hif_lib_client_register(client);
+	if (rc) {
+		netdev_err(ndev, "%s: hif_lib_client_register(%d) failed\n",
+			   __func__, client->id);
+		goto err0;
+	}
+
+	netif_info(priv, drv, ndev, "%s: registered client: %p\n", __func__,
+		   client);
+
+	pfe_gemac_init(priv);
+
+	if (!is_valid_ether_addr(ndev->dev_addr)) {
+		netdev_err(ndev, "%s: invalid MAC address\n", __func__);
+		rc = -EADDRNOTAVAIL;
+		goto err1;
+	}
+
+	gemac_set_laddrN(priv->EMAC_baseaddr,
+			 (struct pfe_mac_addr *)ndev->dev_addr, 1);
+
+	napi_enable(&priv->high_napi);
+	napi_enable(&priv->low_napi);
+	napi_enable(&priv->lro_napi);
+
+	rc = pfe_eth_start(priv);
+
+	netif_tx_wake_all_queues(ndev);
+
+	return rc;
+
+err1:
+	hif_lib_client_unregister(&priv->client);
+
+err0:
+	return rc;
+}
+
+/*
+ *  pfe_eth_shutdown
+ */
+static int pfe_eth_shutdown(struct net_device *ndev, int wake)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+	int i, qstatus, id;
+	unsigned long next_poll = jiffies + 1, end = jiffies +
+				(TX_POLL_TIMEOUT_MS * HZ) / 1000;
+	int tx_pkts, prv_tx_pkts;
+
+	netif_info(priv, ifdown, ndev, "%s\n", __func__);
+
+	for (i = 0; i < emac_txq_cnt; i++)
+		hrtimer_cancel(&priv->fast_tx_timeout[i].timer);
+
+	netif_tx_stop_all_queues(ndev);
+
+	do {
+		tx_pkts = 0;
+		pfe_eth_flush_tx(priv);
+
+		for (i = 0; i < emac_txq_cnt; i++)
+			tx_pkts += hif_lib_tx_pending(&priv->client, i);
+
+		if (tx_pkts) {
+			/*Don't wait forever, break if we cross max timeout */
+			if (time_after(jiffies, end)) {
+				pr_err(
+					"(%s)Tx is not complete after %dmsec\n",
+					ndev->name, TX_POLL_TIMEOUT_MS);
+				break;
+			}
+
+			pr_info("%s : (%s) Waiting for tx packets to free. Pending tx pkts = %d.\n"
+				, __func__, ndev->name, tx_pkts);
+			if (need_resched())
+				schedule();
+		}
+
+	} while (tx_pkts);
+
+	end = jiffies + (TX_POLL_TIMEOUT_MS * HZ) / 1000;
+
+	prv_tx_pkts = tmu_pkts_processed(priv->id);
+	/*
+	 * Wait till TMU transmits all pending packets
+	 * poll tmu_qstatus and pkts processed by TMU for every 10ms
+	 * Consider TMU is busy, If we see TMU qeueu pending or any packets
+	 * processed by TMU
+	 */
+	while (1) {
+		if (time_after(jiffies, next_poll)) {
+			tx_pkts = tmu_pkts_processed(priv->id);
+			qstatus = tmu_qstatus(priv->id) & 0x7ffff;
+
+			if (!qstatus && (tx_pkts == prv_tx_pkts))
+				break;
+			/* Don't wait forever, break if we cross max
+			 * timeout(TX_POLL_TIMEOUT_MS)
+			 */
+			if (time_after(jiffies, end)) {
+				pr_err("TMU%d is busy after %dmsec\n",
+				       priv->id, TX_POLL_TIMEOUT_MS);
+				break;
+			}
+			prv_tx_pkts = tx_pkts;
+			next_poll++;
+		}
+		if (need_resched())
+			schedule();
+	}
+	/* Wait for some more time to complete transmitting packet if any */
+	next_poll = jiffies + 1;
+	while (1) {
+		if (time_after(jiffies, next_poll))
+			break;
+		if (need_resched())
+			schedule();
+	}
+
+	pfe_eth_stop(ndev, wake);
+
+	napi_disable(&priv->lro_napi);
+	napi_disable(&priv->low_napi);
+	napi_disable(&priv->high_napi);
+
+	for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) {
+		pe_dmem_write(id, 0, CLASS_DM_CRC_VALIDATED
+			      + (priv->id * 4), 4);
+	}
+
+	hif_lib_client_unregister(&priv->client);
+
+	return 0;
+}
+
+/* pfe_eth_close
+ *
+ */
+static int pfe_eth_close(struct net_device *ndev)
+{
+	pfe_eth_shutdown(ndev, 0);
+
+	return 0;
+}
+
+/* pfe_eth_suspend
+ *
+ * return value : 1 if netdevice is configured to wakeup system
+ *                0 otherwise
+ */
+int pfe_eth_suspend(struct net_device *ndev)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+	int retval = 0;
+
+	if (priv->wol) {
+		gemac_set_wol(priv->EMAC_baseaddr, priv->wol);
+		retval = 1;
+	}
+	pfe_eth_shutdown(ndev, priv->wol);
+
+	return retval;
+}
+
+/* pfe_eth_resume
+ *
+ */
+int pfe_eth_resume(struct net_device *ndev)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+
+	if (priv->wol)
+		gemac_set_wol(priv->EMAC_baseaddr, 0);
+	gemac_tx_enable(priv->EMAC_baseaddr);
+
+	return pfe_eth_open(ndev);
+}
+
+/* pfe_eth_get_queuenum
+ */
+static int pfe_eth_get_queuenum(struct pfe_eth_priv_s *priv, struct sk_buff
+					*skb)
+{
+	int queuenum = 0;
+	unsigned long flags;
+
+	/* Get the Fast Path queue number */
+	/*
+	 * Use conntrack mark (if conntrack exists), then packet mark (if any),
+	 * then fallback to default
+	 */
+#if defined(CONFIG_IP_NF_CONNTRACK_MARK) || defined(CONFIG_NF_CONNTRACK_MARK)
+	if (skb->_nfct) {
+		enum ip_conntrack_info cinfo;
+		struct nf_conn *ct;
+
+		ct = nf_ct_get(skb, &cinfo);
+
+		if (ct) {
+			u32 connmark;
+
+			connmark = ct->mark;
+
+			if ((connmark & 0x80000000) && priv->id != 0)
+				connmark >>= 16;
+
+			queuenum = connmark & EMAC_QUEUENUM_MASK;
+		}
+	} else  {/* continued after #endif ... */
+#endif
+		if (skb->mark) {
+			queuenum = skb->mark & EMAC_QUEUENUM_MASK;
+		} else {
+			spin_lock_irqsave(&priv->lock, flags);
+			queuenum = priv->default_priority & EMAC_QUEUENUM_MASK;
+			spin_unlock_irqrestore(&priv->lock, flags);
+		}
+#if defined(CONFIG_IP_NF_CONNTRACK_MARK) || defined(CONFIG_NF_CONNTRACK_MARK)
+	}
+#endif
+	return queuenum;
+}
+
+/* pfe_eth_might_stop_tx
+ *
+ */
+static int pfe_eth_might_stop_tx(struct pfe_eth_priv_s *priv, int queuenum,
+				 struct netdev_queue *tx_queue,
+				 unsigned int n_desc,
+				 unsigned int n_segs)
+{
+	ktime_t kt;
+	int tried = 0;
+
+try_again:
+	if (unlikely((__hif_tx_avail(&pfe->hif) < n_desc) ||
+	(hif_lib_tx_avail(&priv->client, queuenum) < n_desc) ||
+	(hif_lib_tx_credit_avail(pfe, priv->id, queuenum) < n_segs))) {
+		if (!tried) {
+			__hif_lib_update_credit(&priv->client, queuenum);
+			tried = 1;
+			goto try_again;
+		}
+#ifdef PFE_ETH_TX_STATS
+		if (__hif_tx_avail(&pfe->hif) < n_desc) {
+			priv->stop_queue_hif[queuenum]++;
+		} else if (hif_lib_tx_avail(&priv->client, queuenum) < n_desc) {
+			priv->stop_queue_hif_client[queuenum]++;
+		} else if (hif_lib_tx_credit_avail(pfe, priv->id, queuenum) <
+			n_segs) {
+			priv->stop_queue_credit[queuenum]++;
+		}
+		priv->stop_queue_total[queuenum]++;
+#endif
+		netif_tx_stop_queue(tx_queue);
+
+		kt = ktime_set(0, LS1012A_TX_FAST_RECOVERY_TIMEOUT_MS *
+				NSEC_PER_MSEC);
+		hrtimer_start(&priv->fast_tx_timeout[queuenum].timer, kt,
+			      HRTIMER_MODE_REL);
+		return -1;
+	} else {
+		return 0;
+	}
+}
+
+#define SA_MAX_OP 2
+/* pfe_hif_send_packet
+ *
+ * At this level if TX fails we drop the packet
+ */
+static void pfe_hif_send_packet(struct sk_buff *skb, struct  pfe_eth_priv_s
+					*priv, int queuenum)
+{
+	struct skb_shared_info *sh = skb_shinfo(skb);
+	unsigned int nr_frags;
+	u32 ctrl = 0;
+
+	netif_info(priv, tx_queued, priv->ndev, "%s\n", __func__);
+
+	if (skb_is_gso(skb)) {
+		priv->stats.tx_dropped++;
+		return;
+	}
+
+	if (skb->ip_summed == CHECKSUM_PARTIAL)
+		ctrl = HIF_CTRL_TX_CHECKSUM;
+
+	nr_frags = sh->nr_frags;
+
+	if (nr_frags) {
+		skb_frag_t *f;
+		int i;
+
+		__hif_lib_xmit_pkt(&priv->client, queuenum, skb->data,
+				   skb_headlen(skb), ctrl, HIF_FIRST_BUFFER,
+				   skb);
+
+		for (i = 0; i < nr_frags - 1; i++) {
+			f = &sh->frags[i];
+			__hif_lib_xmit_pkt(&priv->client, queuenum,
+					   skb_frag_address(f),
+					   skb_frag_size(f),
+					   0x0, 0x0, skb);
+		}
+
+		f = &sh->frags[i];
+
+		__hif_lib_xmit_pkt(&priv->client, queuenum,
+				   skb_frag_address(f), skb_frag_size(f),
+				   0x0, HIF_LAST_BUFFER | HIF_DATA_VALID,
+				   skb);
+
+		netif_info(priv, tx_queued, priv->ndev,
+			   "%s: pkt sent successfully skb:%p nr_frags:%d len:%d\n",
+			   __func__, skb, nr_frags, skb->len);
+	} else {
+		__hif_lib_xmit_pkt(&priv->client, queuenum, skb->data,
+				   skb->len, ctrl, HIF_FIRST_BUFFER |
+				   HIF_LAST_BUFFER | HIF_DATA_VALID,
+				   skb);
+		netif_info(priv, tx_queued, priv->ndev,
+			   "%s: pkt sent successfully skb:%p len:%d\n",
+			   __func__, skb, skb->len);
+	}
+	hif_tx_dma_start();
+	priv->stats.tx_packets++;
+	priv->stats.tx_bytes += skb->len;
+	hif_lib_tx_credit_use(pfe, priv->id, queuenum, 1);
+}
+
+/* pfe_eth_flush_txQ
+ */
+static void pfe_eth_flush_txQ(struct pfe_eth_priv_s *priv, int tx_q_num, int
+				from_tx, int n_desc)
+{
+	struct sk_buff *skb;
+	struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev,
+								tx_q_num);
+	unsigned int flags;
+
+	netif_info(priv, tx_done, priv->ndev, "%s\n", __func__);
+
+	if (!from_tx)
+		__netif_tx_lock_bh(tx_queue);
+
+	/* Clean HIF and client queue */
+	while ((skb = hif_lib_tx_get_next_complete(&priv->client,
+						   tx_q_num, &flags,
+						   HIF_TX_DESC_NT))) {
+		if (flags & HIF_DATA_VALID)
+			dev_kfree_skb_any(skb);
+	}
+	if (!from_tx)
+		__netif_tx_unlock_bh(tx_queue);
+}
+
+/* pfe_eth_flush_tx
+ */
+static void pfe_eth_flush_tx(struct pfe_eth_priv_s *priv)
+{
+	int ii;
+
+	netif_info(priv, tx_done, priv->ndev, "%s\n", __func__);
+
+	for (ii = 0; ii < emac_txq_cnt; ii++) {
+		pfe_eth_flush_txQ(priv, ii, 0, 0);
+		__hif_lib_update_credit(&priv->client, ii);
+	}
+}
+
+static void pfe_tx_get_req_desc(struct sk_buff *skb, unsigned int *n_desc, unsigned int
+				*n_segs)
+{
+	struct skb_shared_info *sh = skb_shinfo(skb);
+
+	/* Scattered data */
+	if (sh->nr_frags) {
+		*n_desc = sh->nr_frags + 1;
+		*n_segs = 1;
+	/* Regular case */
+	} else {
+		*n_desc = 1;
+		*n_segs = 1;
+	}
+}
+
+/* pfe_eth_send_packet
+ */
+static int pfe_eth_send_packet(struct sk_buff *skb, struct net_device *ndev)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+	int tx_q_num = skb_get_queue_mapping(skb);
+	int n_desc, n_segs;
+	struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev,
+								tx_q_num);
+
+	netif_info(priv, tx_queued, ndev, "%s\n", __func__);
+
+	if ((!skb_is_gso(skb)) && (skb_headroom(skb) < (PFE_PKT_HEADER_SZ +
+			sizeof(unsigned long)))) {
+		netif_warn(priv, tx_err, priv->ndev, "%s: copying skb\n",
+			   __func__);
+
+		if (pskb_expand_head(skb, (PFE_PKT_HEADER_SZ + sizeof(unsigned
+					long)), 0, GFP_ATOMIC)) {
+			/* No need to re-transmit, no way to recover*/
+			kfree_skb(skb);
+			priv->stats.tx_dropped++;
+			return NETDEV_TX_OK;
+		}
+	}
+
+	pfe_tx_get_req_desc(skb, &n_desc, &n_segs);
+
+	hif_tx_lock(&pfe->hif);
+	if (unlikely(pfe_eth_might_stop_tx(priv, tx_q_num, tx_queue, n_desc,
+					   n_segs))) {
+#ifdef PFE_ETH_TX_STATS
+		if (priv->was_stopped[tx_q_num]) {
+			priv->clean_fail[tx_q_num]++;
+			priv->was_stopped[tx_q_num] = 0;
+		}
+#endif
+		hif_tx_unlock(&pfe->hif);
+		return NETDEV_TX_BUSY;
+	}
+
+	pfe_hif_send_packet(skb, priv, tx_q_num);
+
+	hif_tx_unlock(&pfe->hif);
+
+	tx_queue->trans_start = jiffies;
+
+#ifdef PFE_ETH_TX_STATS
+	priv->was_stopped[tx_q_num] = 0;
+#endif
+
+	return NETDEV_TX_OK;
+}
+
+/* pfe_eth_select_queue
+ *
+ */
+static u16 pfe_eth_select_queue(struct net_device *ndev, struct sk_buff *skb,
+				struct net_device *sb_dev)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+
+	return pfe_eth_get_queuenum(priv, skb);
+}
+
+/* pfe_eth_get_stats
+ */
+static struct net_device_stats *pfe_eth_get_stats(struct net_device *ndev)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+
+	netif_info(priv, drv, ndev, "%s\n", __func__);
+
+	return &priv->stats;
+}
+
+/* pfe_eth_set_mac_address
+ */
+static int pfe_eth_set_mac_address(struct net_device *ndev, void *addr)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+	struct sockaddr *sa = addr;
+
+	netif_info(priv, drv, ndev, "%s\n", __func__);
+
+	if (!is_valid_ether_addr(sa->sa_data))
+		return -EADDRNOTAVAIL;
+
+	dev_addr_set(ndev, sa->sa_data);
+
+	gemac_set_laddrN(priv->EMAC_baseaddr,
+			 (struct pfe_mac_addr *)ndev->dev_addr, 1);
+
+	return 0;
+}
+
+/* pfe_eth_enet_addr_byte_mac
+ */
+static int pfe_eth_enet_addr_byte_mac(u8 *enet_byte_addr,
+				      struct pfe_mac_addr *enet_addr)
+{
+	if (!enet_byte_addr || !enet_addr) {
+		return -1;
+
+	} else {
+		enet_addr->bottom = enet_byte_addr[0] |
+			(enet_byte_addr[1] << 8) |
+			(enet_byte_addr[2] << 16) |
+			(enet_byte_addr[3] << 24);
+		enet_addr->top = enet_byte_addr[4] |
+			(enet_byte_addr[5] << 8);
+		return 0;
+	}
+}
+
+/* pfe_eth_set_multi
+ */
+static void pfe_eth_set_multi(struct net_device *ndev)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+	struct pfe_mac_addr    hash_addr; /* hash register structure */
+	/* specific mac address	register structure */
+	struct pfe_mac_addr    spec_addr;
+	int		result; /* index into hash register to set.. */
+	int		uc_count = 0;
+	struct netdev_hw_addr *ha;
+
+	if (ndev->flags & IFF_PROMISC) {
+		netif_info(priv, drv, ndev, "entering promiscuous mode\n");
+
+		priv->promisc = 1;
+		gemac_enable_copy_all(priv->EMAC_baseaddr);
+	} else {
+		priv->promisc = 0;
+		gemac_disable_copy_all(priv->EMAC_baseaddr);
+	}
+
+	/* Enable broadcast frame reception if required. */
+	if (ndev->flags & IFF_BROADCAST) {
+		gemac_allow_broadcast(priv->EMAC_baseaddr);
+	} else {
+		netif_info(priv, drv, ndev,
+			   "disabling broadcast frame reception\n");
+
+		gemac_no_broadcast(priv->EMAC_baseaddr);
+	}
+
+	if (ndev->flags & IFF_ALLMULTI) {
+		/* Set the hash to rx all multicast frames */
+		hash_addr.bottom = 0xFFFFFFFF;
+		hash_addr.top = 0xFFFFFFFF;
+		gemac_set_hash(priv->EMAC_baseaddr, &hash_addr);
+		netdev_for_each_uc_addr(ha, ndev) {
+			if (uc_count >= MAX_UC_SPEC_ADDR_REG)
+				break;
+			pfe_eth_enet_addr_byte_mac(ha->addr, &spec_addr);
+			gemac_set_laddrN(priv->EMAC_baseaddr, &spec_addr,
+					 uc_count + 2);
+			uc_count++;
+		}
+	} else if ((netdev_mc_count(ndev) > 0)  || (netdev_uc_count(ndev))) {
+		u8 *addr;
+
+		hash_addr.bottom = 0;
+		hash_addr.top = 0;
+
+		netdev_for_each_mc_addr(ha, ndev) {
+			addr = ha->addr;
+
+			netif_info(priv, drv, ndev,
+				   "adding multicast address %X:%X:%X:%X:%X:%X to gem filter\n",
+				addr[0], addr[1], addr[2],
+				addr[3], addr[4], addr[5]);
+
+			result = pfe_eth_get_hash(addr);
+
+			if (result < EMAC_HASH_REG_BITS) {
+				if (result < 32)
+					hash_addr.bottom |= (1 << result);
+				else
+					hash_addr.top |= (1 << (result - 32));
+			} else {
+				break;
+			}
+		}
+
+		uc_count = -1;
+		netdev_for_each_uc_addr(ha, ndev) {
+			addr = ha->addr;
+
+			if (++uc_count < MAX_UC_SPEC_ADDR_REG)   {
+				netdev_info(ndev,
+					    "adding unicast address %02x:%02x:%02x:%02x:%02x:%02x to gem filter\n",
+					    addr[0], addr[1], addr[2],
+					    addr[3], addr[4], addr[5]);
+				pfe_eth_enet_addr_byte_mac(addr, &spec_addr);
+				gemac_set_laddrN(priv->EMAC_baseaddr,
+						 &spec_addr, uc_count + 2);
+			} else {
+				netif_info(priv, drv, ndev,
+					   "adding unicast address %02x:%02x:%02x:%02x:%02x:%02x to gem hash\n",
+					   addr[0], addr[1], addr[2],
+					   addr[3], addr[4], addr[5]);
+
+				result = pfe_eth_get_hash(addr);
+				if (result >= EMAC_HASH_REG_BITS) {
+					break;
+
+				} else {
+					if (result < 32)
+						hash_addr.bottom |= (1 <<
+								result);
+					else
+						hash_addr.top |= (1 <<
+								(result - 32));
+				}
+			}
+		}
+
+		gemac_set_hash(priv->EMAC_baseaddr, &hash_addr);
+	}
+
+	if (!(netdev_uc_count(ndev) >= MAX_UC_SPEC_ADDR_REG)) {
+		/*
+		 *  Check if there are any specific address HW registers that
+		 * need to be flushed
+		 */
+		for (uc_count = netdev_uc_count(ndev); uc_count <
+			MAX_UC_SPEC_ADDR_REG; uc_count++)
+			gemac_clear_laddrN(priv->EMAC_baseaddr, uc_count + 2);
+	}
+
+	if (ndev->flags & IFF_LOOPBACK)
+		gemac_set_loop(priv->EMAC_baseaddr, LB_LOCAL);
+}
+
+/* pfe_eth_set_features
+ */
+static int pfe_eth_set_features(struct net_device *ndev, netdev_features_t
+					features)
+{
+	struct pfe_eth_priv_s *priv = netdev_priv(ndev);
+	int rc = 0;
+
+	if (features & NETIF_F_RXCSUM)
+		gemac_enable_rx_checksum_offload(priv->EMAC_baseaddr);
+	else
+		gemac_disable_rx_checksum_offload(priv->EMAC_baseaddr);
+	return rc;
+}
+
+/* pfe_eth_fast_tx_timeout
+ */
+static enum hrtimer_restart pfe_eth_fast_tx_timeout(struct hrtimer *timer)
+{
+	struct pfe_eth_fast_timer *fast_tx_timeout = container_of(timer, struct
+							pfe_eth_fast_timer,
+							timer);
+	struct pfe_eth_priv_s *priv =  container_of(fast_tx_timeout->base,
+							struct pfe_eth_priv_s,
+							fast_tx_timeout);
+	struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev,
+						fast_tx_timeout->queuenum);
+
+	if (netif_tx_queue_stopped(tx_queue)) {
+#ifdef PFE_ETH_TX_STATS
+		priv->was_stopped[fast_tx_timeout->queuenum] = 1;
+#endif
+		netif_tx_wake_queue(tx_queue);
+	}
+
+	return HRTIMER_NORESTART;
+}
+
+/* pfe_eth_fast_tx_timeout_init
+ */
+static void pfe_eth_fast_tx_timeout_init(struct pfe_eth_priv_s *priv)
+{
+	int i;
+
+	for (i = 0; i < emac_txq_cnt; i++) {
+		priv->fast_tx_timeout[i].queuenum = i;
+		hrtimer_init(&priv->fast_tx_timeout[i].timer, CLOCK_MONOTONIC,
+			     HRTIMER_MODE_REL);
+		priv->fast_tx_timeout[i].timer.function =
+				pfe_eth_fast_tx_timeout;
+		priv->fast_tx_timeout[i].base = priv->fast_tx_timeout;
+	}
+}
+
+static struct sk_buff *pfe_eth_rx_skb(struct net_device *ndev,
+				      struct	pfe_eth_priv_s *priv,
+				      unsigned int qno)
+{
+	void *buf_addr;
+	unsigned int rx_ctrl;
+	unsigned int desc_ctrl = 0;
+	struct hif_ipsec_hdr *ipsec_hdr = NULL;
+	struct sk_buff *skb;
+	struct sk_buff *skb_frag, *skb_frag_last = NULL;
+	int length = 0, offset;
+
+	skb = priv->skb_inflight[qno];
+
+	if (skb) {
+		skb_frag_last = skb_shinfo(skb)->frag_list;
+		if (skb_frag_last) {
+			while (skb_frag_last->next)
+				skb_frag_last = skb_frag_last->next;
+		}
+	}
+
+	while (!(desc_ctrl & CL_DESC_LAST)) {
+		buf_addr = hif_lib_receive_pkt(&priv->client, qno, &length,
+					       &offset, &rx_ctrl, &desc_ctrl,
+					       (void **)&ipsec_hdr);
+		if (!buf_addr)
+			goto incomplete;
+
+#ifdef PFE_ETH_NAPI_STATS
+		priv->napi_counters[NAPI_DESC_COUNT]++;
+#endif
+
+		/* First frag */
+		if (desc_ctrl & CL_DESC_FIRST) {
+			skb = build_skb(buf_addr, 0);
+			if (unlikely(!skb))
+				goto pkt_drop;
+
+			skb_reserve(skb, offset);
+			skb_put(skb, length);
+			skb->dev = ndev;
+
+			if ((ndev->features & NETIF_F_RXCSUM) && (rx_ctrl &
+					HIF_CTRL_RX_CHECKSUMMED))
+				skb->ip_summed = CHECKSUM_UNNECESSARY;
+			else
+				skb_checksum_none_assert(skb);
+
+		} else {
+			/* Next frags */
+			if (unlikely(!skb)) {
+				pr_err("%s: NULL skb_inflight\n",
+				       __func__);
+				goto pkt_drop;
+			}
+
+			skb_frag = build_skb(buf_addr, 0);
+
+			if (unlikely(!skb_frag)) {
+				kfree(buf_addr);
+				goto pkt_drop;
+			}
+
+			skb_reserve(skb_frag, offset);
+			skb_put(skb_frag, length);
+
+			skb_frag->dev = ndev;
+
+			if (skb_shinfo(skb)->frag_list)
+				skb_frag_last->next = skb_frag;
+			else
+				skb_shinfo(skb)->frag_list = skb_frag;
+
+			skb->truesize += skb_frag->truesize;
+			skb->data_len += length;
+			skb->len += length;
+			skb_frag_last = skb_frag;
+		}
+	}
+
+	priv->skb_inflight[qno] = NULL;
+	return skb;
+
+incomplete:
+	priv->skb_inflight[qno] = skb;
+	return NULL;
+
+pkt_drop:
+	priv->skb_inflight[qno] = NULL;
+
+	if (skb)
+		kfree_skb(skb);
+	else
+		kfree(buf_addr);
+
+	priv->stats.rx_errors++;
+
+	return NULL;
+}
+
+/* pfe_eth_poll
+ */
+static int pfe_eth_poll(struct pfe_eth_priv_s *priv, struct napi_struct *napi,
+			unsigned int qno, int budget)
+{
+	struct net_device *ndev = priv->ndev;
+	struct sk_buff *skb;
+	int work_done = 0;
+	unsigned int len;
+
+	netif_info(priv, intr, priv->ndev, "%s\n", __func__);
+
+#ifdef PFE_ETH_NAPI_STATS
+	priv->napi_counters[NAPI_POLL_COUNT]++;
+#endif
+
+	do {
+		skb = pfe_eth_rx_skb(ndev, priv, qno);
+
+		if (!skb)
+			break;
+
+		len = skb->len;
+
+		/* Packet will be processed */
+		skb->protocol = eth_type_trans(skb, ndev);
+
+		netif_receive_skb(skb);
+
+		priv->stats.rx_packets++;
+		priv->stats.rx_bytes += len;
+
+		work_done++;
+
+#ifdef PFE_ETH_NAPI_STATS
+		priv->napi_counters[NAPI_PACKET_COUNT]++;
+#endif
+
+	} while (work_done < budget);
+
+	/*
+	 * If no Rx receive nor cleanup work was done, exit polling mode.
+	 * No more netif_running(dev) check is required here , as this is
+	 * checked in net/core/dev.c (2.6.33.5 kernel specific).
+	 */
+	if (work_done < budget) {
+		napi_complete(napi);
+
+		hif_lib_event_handler_start(&priv->client, EVENT_RX_PKT_IND,
+					    qno);
+	}
+#ifdef PFE_ETH_NAPI_STATS
+	else
+		priv->napi_counters[NAPI_FULL_BUDGET_COUNT]++;
+#endif
+
+	return work_done;
+}
+
+/*
+ * pfe_eth_lro_poll
+ */
+static int pfe_eth_lro_poll(struct napi_struct *napi, int budget)
+{
+	struct pfe_eth_priv_s *priv = container_of(napi, struct pfe_eth_priv_s,
+							lro_napi);
+
+	netif_info(priv, intr, priv->ndev, "%s\n", __func__);
+
+	return pfe_eth_poll(priv, napi, 2, budget);
+}
+
+/* pfe_eth_low_poll
+ */
+static int pfe_eth_low_poll(struct napi_struct *napi, int budget)
+{
+	struct pfe_eth_priv_s *priv = container_of(napi, struct pfe_eth_priv_s,
+							low_napi);
+
+	netif_info(priv, intr, priv->ndev, "%s\n", __func__);
+
+	return pfe_eth_poll(priv, napi, 1, budget);
+}
+
+/* pfe_eth_high_poll
+ */
+static int pfe_eth_high_poll(struct napi_struct *napi, int budget)
+{
+	struct pfe_eth_priv_s *priv = container_of(napi, struct pfe_eth_priv_s,
+							high_napi);
+
+	netif_info(priv, intr, priv->ndev, "%s\n", __func__);
+
+	return pfe_eth_poll(priv, napi, 0, budget);
+}
+
+static const struct net_device_ops pfe_netdev_ops = {
+	.ndo_open = pfe_eth_open,
+	.ndo_stop = pfe_eth_close,
+	.ndo_start_xmit = pfe_eth_send_packet,
+	.ndo_select_queue = pfe_eth_select_queue,
+	.ndo_set_rx_mode = pfe_eth_set_multi,
+	.ndo_set_mac_address = pfe_eth_set_mac_address,
+	.ndo_validate_addr = eth_validate_addr,
+	.ndo_change_mtu = pfe_eth_change_mtu,
+	.ndo_get_stats = pfe_eth_get_stats,
+	.ndo_set_features = pfe_eth_set_features,
+};
+
+/* pfe_eth_init_one
+ */
+static int pfe_eth_init_one(struct pfe *pfe,
+			    struct ls1012a_pfe_platform_data *pfe_info,
+			    int id)
+{
+	struct net_device *ndev = NULL;
+	struct pfe_eth_priv_s *priv = NULL;
+	struct ls1012a_eth_platform_data *einfo;
+	int err;
+
+	einfo = (struct ls1012a_eth_platform_data *)
+				pfe_info->ls1012a_eth_pdata;
+
+	/* einfo never be NULL, but no harm in having this check */
+	if (!einfo) {
+		pr_err(
+			"%s: pfe missing additional gemacs platform data\n"
+			, __func__);
+		err = -ENODEV;
+		goto err0;
+	}
+
+	if (us)
+		emac_txq_cnt = EMAC_TXQ_CNT;
+	/* Create an ethernet device instance */
+	ndev = alloc_etherdev_mq(sizeof(*priv), emac_txq_cnt);
+
+	if (!ndev) {
+		pr_err("%s: gemac %d device allocation failed\n",
+		       __func__, einfo[id].gem_id);
+		err = -ENOMEM;
+		goto err0;
+	}
+
+	priv = netdev_priv(ndev);
+	priv->ndev = ndev;
+	priv->id = einfo[id].gem_id;
+	priv->pfe = pfe;
+	priv->phy_node = einfo[id].phy_node;
+
+	SET_NETDEV_DEV(priv->ndev, priv->pfe->dev);
+
+	pfe->eth.eth_priv[id] = priv;
+
+	/* Set the info in the priv to the current info */
+	priv->einfo = &einfo[id];
+	priv->EMAC_baseaddr = cbus_emac_base[id];
+	priv->GPI_baseaddr = cbus_gpi_base[id];
+
+	spin_lock_init(&priv->lock);
+
+	pfe_eth_fast_tx_timeout_init(priv);
+
+	/* Copy the station address into the dev structure, */
+	dev_addr_set(ndev, einfo[id].mac_addr);
+
+	if (us)
+		goto phy_init;
+
+	ndev->mtu = 1500;
+
+	/* Set MTU limits */
+	ndev->min_mtu = ETH_MIN_MTU;
+
+/*
+ * Jumbo frames are not supported on LS1012A rev-1.0.
+ * So max mtu should be restricted to supported frame length.
+ */
+	if (pfe_errata_a010897)
+		ndev->max_mtu = JUMBO_FRAME_SIZE_V1 - ETH_HLEN - ETH_FCS_LEN;
+	else
+		ndev->max_mtu = JUMBO_FRAME_SIZE_V2 - ETH_HLEN - ETH_FCS_LEN;
+
+	/*Enable after checksum offload is validated */
+	ndev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM |
+		NETIF_F_IPV6_CSUM | NETIF_F_SG;
+
+	/* enabled by default */
+	ndev->features = ndev->hw_features;
+
+	priv->usr_features = ndev->features;
+
+	ndev->netdev_ops = &pfe_netdev_ops;
+
+	ndev->ethtool_ops = &pfe_ethtool_ops;
+
+	/* Enable basic messages by default */
+	priv->msg_enable = NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK |
+				NETIF_MSG_PROBE;
+
+	netif_napi_add(ndev, &priv->low_napi, pfe_eth_low_poll);
+	netif_napi_add(ndev, &priv->high_napi, pfe_eth_high_poll);
+	netif_napi_add(ndev, &priv->lro_napi, pfe_eth_lro_poll);
+
+	err = register_netdev(ndev);
+	if (err) {
+		netdev_err(ndev, "register_netdev() failed\n");
+		goto err1;
+	}
+
+	if ((!(pfe_use_old_dts_phy) && !(priv->phy_node)) ||
+	    ((pfe_use_old_dts_phy) &&
+	      (priv->einfo->phy_flags & GEMAC_NO_PHY))) {
+		pr_info("%s: No PHY or fixed-link\n", __func__);
+		goto skip_phy_init;
+	}
+
+phy_init:
+	device_init_wakeup(&ndev->dev, true);
+
+	err = pfe_phy_init(ndev);
+	if (err) {
+		netdev_err(ndev, "%s: pfe_phy_init() failed\n",
+			   __func__);
+		goto err2;
+	}
+
+	if (us) {
+		if (priv->phydev)
+			phy_start(priv->phydev);
+		return 0;
+	}
+
+	netif_carrier_on(ndev);
+
+skip_phy_init:
+	/* Create all the sysfs files */
+	if (pfe_eth_sysfs_init(ndev))
+		goto err3;
+
+	netif_info(priv, probe, ndev, "%s: created interface, baseaddr: %p\n",
+		   __func__, priv->EMAC_baseaddr);
+
+	return 0;
+
+err3:
+	pfe_phy_exit(priv->ndev);
+err2:
+	if (us)
+		goto err1;
+	unregister_netdev(ndev);
+err1:
+	free_netdev(priv->ndev);
+err0:
+	return err;
+}
+
+/* pfe_eth_init
+ */
+int pfe_eth_init(struct pfe *pfe)
+{
+	int ii = 0;
+	int err;
+	struct ls1012a_pfe_platform_data *pfe_info;
+
+	pr_info("%s\n", __func__);
+
+	cbus_emac_base[0] = EMAC1_BASE_ADDR;
+	cbus_emac_base[1] = EMAC2_BASE_ADDR;
+
+	cbus_gpi_base[0] = EGPI1_BASE_ADDR;
+	cbus_gpi_base[1] = EGPI2_BASE_ADDR;
+
+	pfe_info = (struct ls1012a_pfe_platform_data *)
+					pfe->dev->platform_data;
+	if (!pfe_info) {
+		pr_err("%s: pfe missing additional platform data\n", __func__);
+		err = -ENODEV;
+		goto err_pdata;
+	}
+
+	for (ii = 0; ii < NUM_GEMAC_SUPPORT; ii++) {
+		err = pfe_eth_mdio_init(pfe, pfe_info, ii);
+		if (err) {
+			pr_err("%s: pfe_eth_mdio_init() failed\n", __func__);
+			goto err_mdio_init;
+		}
+	}
+
+	if (soc_device_match(ls1012a_rev1_soc_attr))
+		pfe_errata_a010897 = true;
+	else
+		pfe_errata_a010897 = false;
+
+	for (ii = 0; ii < NUM_GEMAC_SUPPORT; ii++) {
+		err = pfe_eth_init_one(pfe, pfe_info, ii);
+		if (err)
+			goto err_eth_init;
+	}
+
+	return 0;
+
+err_eth_init:
+	while (ii--) {
+		pfe_eth_exit_one(pfe->eth.eth_priv[ii]);
+		pfe_eth_mdio_exit(pfe, ii);
+	}
+
+err_mdio_init:
+err_pdata:
+	return err;
+}
+
+/* pfe_eth_exit_one
+ */
+static void pfe_eth_exit_one(struct pfe_eth_priv_s *priv)
+{
+	netif_info(priv, probe, priv->ndev, "%s\n", __func__);
+
+	if (!us)
+		pfe_eth_sysfs_exit(priv->ndev);
+
+	if ((!(pfe_use_old_dts_phy) && !(priv->phy_node)) ||
+	    ((pfe_use_old_dts_phy) &&
+	      (priv->einfo->phy_flags & GEMAC_NO_PHY))) {
+		pr_info("%s: No PHY or fixed-link\n", __func__);
+		goto skip_phy_exit;
+	}
+
+	pfe_phy_exit(priv->ndev);
+
+skip_phy_exit:
+	if (!us)
+		unregister_netdev(priv->ndev);
+
+	free_netdev(priv->ndev);
+}
+
+/* pfe_eth_exit
+ */
+void pfe_eth_exit(struct pfe *pfe)
+{
+	int ii;
+
+	pr_info("%s\n", __func__);
+
+	for (ii = NUM_GEMAC_SUPPORT - 1; ii >= 0; ii--)
+		pfe_eth_exit_one(pfe->eth.eth_priv[ii]);
+
+	for (ii = NUM_GEMAC_SUPPORT - 1; ii >= 0; ii--)
+		pfe_eth_mdio_exit(pfe, ii);
+}
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_eth.h
@@ -0,0 +1,175 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#ifndef _PFE_ETH_H_
+#define _PFE_ETH_H_
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+
+#define PFE_ETH_NAPI_STATS
+#define PFE_ETH_TX_STATS
+
+#define PFE_ETH_FRAGS_MAX (65536 / HIF_RX_PKT_MIN_SIZE)
+#define LRO_LEN_COUNT_MAX	32
+#define LRO_NB_COUNT_MAX	32
+
+#define PFE_PAUSE_FLAG_ENABLE		1
+#define PFE_PAUSE_FLAG_AUTONEG		2
+
+/* GEMAC configured by SW */
+/* GEMAC configured by phy lines (not for MII/GMII) */
+
+#define GEMAC_SW_FULL_DUPLEX    BIT(9)
+#define GEMAC_SW_SPEED_10M      (0 << 12)
+#define GEMAC_SW_SPEED_100M     BIT(12)
+#define GEMAC_SW_SPEED_1G       (2 << 12)
+
+#define GEMAC_NO_PHY            BIT(0)
+
+struct ls1012a_eth_platform_data {
+	/* board specific information */
+	phy_interface_t mii_config;
+	u32 phy_flags;
+	u32 gem_id;
+	u32 phy_id;
+	u32 mdio_muxval;
+	u8 mac_addr[ETH_ALEN];
+	struct device_node	*phy_node;
+};
+
+struct ls1012a_mdio_platform_data {
+	int id;
+	int irq[32];
+	u32 phy_mask;
+	int mdc_div;
+};
+
+struct ls1012a_pfe_platform_data {
+	struct ls1012a_eth_platform_data ls1012a_eth_pdata[3];
+	struct ls1012a_mdio_platform_data ls1012a_mdio_pdata[3];
+};
+
+#define NUM_GEMAC_SUPPORT	2
+#define DRV_NAME		"pfe-eth"
+#define DRV_VERSION		"1.0"
+
+#define LS1012A_TX_FAST_RECOVERY_TIMEOUT_MS	3
+#define TX_POLL_TIMEOUT_MS	1000
+
+#define EMAC_TXQ_CNT	16
+#define EMAC_TXQ_DEPTH	(HIF_TX_DESC_NT)
+
+#define JUMBO_FRAME_SIZE_V1	1900
+#define JUMBO_FRAME_SIZE_V2	10258
+/*
+ * Client Tx queue threshold, for txQ flush condition.
+ * It must be smaller than the queue size (in case we ever change it in the
+ * future).
+ */
+#define HIF_CL_TX_FLUSH_MARK	32
+
+/*
+ * Max number of TX resources (HIF descriptors or skbs) that will be released
+ * in a single go during batch recycling.
+ * Should be lower than the flush mark so the SW can provide the HW with a
+ * continuous stream of packets instead of bursts.
+ */
+#define TX_FREE_MAX_COUNT 16
+#define EMAC_RXQ_CNT	3
+#define EMAC_RXQ_DEPTH	HIF_RX_DESC_NT
+/* make sure clients can receive a full burst of packets */
+#define EMAC_RMON_TXBYTES_POS	0x00
+#define EMAC_RMON_RXBYTES_POS	0x14
+
+#define EMAC_QUEUENUM_MASK      (emac_txq_cnt - 1)
+#define EMAC_MDIO_TIMEOUT	1000
+#define MAX_UC_SPEC_ADDR_REG 31
+
+struct pfe_eth_fast_timer {
+	int queuenum;
+	struct hrtimer timer;
+	void *base;
+};
+
+struct  pfe_eth_priv_s {
+	struct pfe		*pfe;
+	struct hif_client_s	client;
+	struct napi_struct	lro_napi;
+	struct napi_struct	low_napi;
+	struct napi_struct	high_napi;
+	int			low_tmu_q;
+	int			high_tmu_q;
+	struct net_device_stats stats;
+	struct net_device	*ndev;
+	int			id;
+	int			promisc;
+	unsigned int		msg_enable;
+	unsigned int		usr_features;
+
+	spinlock_t		lock; /* protect member variables */
+	unsigned int		event_status;
+	int			irq;
+	void			*EMAC_baseaddr;
+	void			*GPI_baseaddr;
+	/* PHY stuff */
+	struct phy_device	*phydev;
+	int			oldspeed;
+	int			oldduplex;
+	int			oldlink;
+	struct device_node	*phy_node;
+	struct clk		*gemtx_clk;
+	int			wol;
+	int			pause_flag;
+
+	int			default_priority;
+	struct pfe_eth_fast_timer fast_tx_timeout[EMAC_TXQ_CNT];
+
+	struct ls1012a_eth_platform_data *einfo;
+	struct sk_buff *skb_inflight[EMAC_RXQ_CNT + 6];
+
+#ifdef PFE_ETH_TX_STATS
+	unsigned int stop_queue_total[EMAC_TXQ_CNT];
+	unsigned int stop_queue_hif[EMAC_TXQ_CNT];
+	unsigned int stop_queue_hif_client[EMAC_TXQ_CNT];
+	unsigned int stop_queue_credit[EMAC_TXQ_CNT];
+	unsigned int clean_fail[EMAC_TXQ_CNT];
+	unsigned int was_stopped[EMAC_TXQ_CNT];
+#endif
+
+#ifdef PFE_ETH_NAPI_STATS
+	unsigned int napi_counters[NAPI_MAX_COUNT];
+#endif
+	unsigned int frags_inflight[EMAC_RXQ_CNT + 6];
+};
+
+struct pfe_eth {
+	struct pfe_eth_priv_s *eth_priv[3];
+};
+
+struct pfe_mdio_priv_s {
+	void __iomem *mdio_base;
+	int			mdc_div;
+	struct mii_bus		*mii_bus;
+};
+
+struct pfe_mdio {
+	struct pfe_mdio_priv_s *mdio_priv[3];
+};
+
+int pfe_eth_init(struct pfe *pfe);
+void pfe_eth_exit(struct pfe *pfe);
+int pfe_eth_suspend(struct net_device *dev);
+int pfe_eth_resume(struct net_device *dev);
+int pfe_eth_mdio_reset(struct mii_bus *bus);
+
+#endif /* _PFE_ETH_H_ */
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_firmware.c
@@ -0,0 +1,398 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+/*
+ * @file
+ * Contains all the functions to handle parsing and loading of PE firmware
+ * files.
+ */
+#include <linux/firmware.h>
+
+#include "pfe_mod.h"
+#include "pfe_firmware.h"
+#include "pfe/pfe.h"
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+
+static struct elf32_shdr *get_elf_section_header(const u8 *fw,
+						 const char *section)
+{
+	struct elf32_hdr *elf_hdr = (struct elf32_hdr *)fw;
+	struct elf32_shdr *shdr;
+	struct elf32_shdr *shdr_shstr;
+	Elf32_Off e_shoff = be32_to_cpu(elf_hdr->e_shoff);
+	Elf32_Half e_shentsize = be16_to_cpu(elf_hdr->e_shentsize);
+	Elf32_Half e_shnum = be16_to_cpu(elf_hdr->e_shnum);
+	Elf32_Half e_shstrndx = be16_to_cpu(elf_hdr->e_shstrndx);
+	Elf32_Off shstr_offset;
+	Elf32_Word sh_name;
+	const char *name;
+	int i;
+
+	/* Section header strings */
+	shdr_shstr = (struct elf32_shdr *)((u8 *)elf_hdr + e_shoff + e_shstrndx
+					* e_shentsize);
+	shstr_offset = be32_to_cpu(shdr_shstr->sh_offset);
+
+	for (i = 0; i < e_shnum; i++) {
+		shdr = (struct elf32_shdr *)((u8 *)elf_hdr + e_shoff
+					     + i * e_shentsize);
+
+		sh_name = be32_to_cpu(shdr->sh_name);
+
+		name = (const char *)((u8 *)elf_hdr + shstr_offset + sh_name);
+
+		if (!strcmp(name, section))
+			return shdr;
+	}
+
+	pr_err("%s: didn't find section %s\n", __func__, section);
+
+	return NULL;
+}
+
+#if defined(CFG_DIAGS)
+static int pfe_get_diags_info(const u8 *fw, struct pfe_diags_info
+				*diags_info)
+{
+	struct elf32_shdr *shdr;
+	unsigned long offset, size;
+
+	shdr = get_elf_section_header(fw, ".pfe_diags_str");
+	if (shdr) {
+		offset = be32_to_cpu(shdr->sh_offset);
+		size = be32_to_cpu(shdr->sh_size);
+		diags_info->diags_str_base = be32_to_cpu(shdr->sh_addr);
+		diags_info->diags_str_size = size;
+		diags_info->diags_str_array = kmalloc(size, GFP_KERNEL);
+		memcpy(diags_info->diags_str_array, fw + offset, size);
+
+		return 0;
+	} else {
+		return -1;
+	}
+}
+#endif
+
+static void pfe_check_version_info(const u8 *fw)
+{
+	/*static char *version = NULL;*/
+	const u8 *elf_data = fw;
+	static char *version;
+
+	struct elf32_shdr *shdr = get_elf_section_header(fw, ".version");
+
+	if (shdr) {
+		if (!version) {
+			/*
+			 * this is the first fw we load, use its version
+			 * string as reference (whatever it is)
+			 */
+			version = (char *)(elf_data +
+					be32_to_cpu(shdr->sh_offset));
+
+			pr_info("PFE binary version: %s\n", version);
+		} else {
+			/*
+			 * already have loaded at least one firmware, check
+			 * sequence can start now
+			 */
+			if (strcmp(version, (char *)(elf_data +
+				be32_to_cpu(shdr->sh_offset)))) {
+				pr_info(
+				"WARNING: PFE firmware binaries from incompatible version\n");
+			}
+		}
+	} else {
+		/*
+		 * version cannot be verified, a potential issue that should
+		 * be reported
+		 */
+		pr_info(
+			 "WARNING: PFE firmware binaries from incompatible version\n");
+	}
+}
+
+/* PFE elf firmware loader.
+ * Loads an elf firmware image into a list of PE's (specified using a bitmask)
+ *
+ * @param pe_mask	Mask of PE id's to load firmware to
+ * @param fw		Pointer to the firmware image
+ *
+ * @return		0 on success, a negative value on error
+ *
+ */
+static int pfe_load_elf(int pe_mask, const u8 *fw, struct pfe *pfe)
+{
+	struct elf32_hdr *elf_hdr = (struct elf32_hdr *)fw;
+	Elf32_Half sections = be16_to_cpu(elf_hdr->e_shnum);
+	struct elf32_shdr *shdr = (struct elf32_shdr *)(fw +
+					be32_to_cpu(elf_hdr->e_shoff));
+	int id, section;
+	int rc;
+
+	pr_info("%s\n", __func__);
+
+	/* Some sanity checks */
+	if (strncmp(&elf_hdr->e_ident[EI_MAG0], ELFMAG, SELFMAG)) {
+		pr_err("%s: incorrect elf magic number\n", __func__);
+		return -EINVAL;
+	}
+
+	if (elf_hdr->e_ident[EI_CLASS] != ELFCLASS32) {
+		pr_err("%s: incorrect elf class(%x)\n", __func__,
+		       elf_hdr->e_ident[EI_CLASS]);
+		return -EINVAL;
+	}
+
+	if (elf_hdr->e_ident[EI_DATA] != ELFDATA2MSB) {
+		pr_err("%s: incorrect elf data(%x)\n", __func__,
+		       elf_hdr->e_ident[EI_DATA]);
+		return -EINVAL;
+	}
+
+	if (be16_to_cpu(elf_hdr->e_type) != ET_EXEC) {
+		pr_err("%s: incorrect elf file type(%x)\n", __func__,
+		       be16_to_cpu(elf_hdr->e_type));
+		return -EINVAL;
+	}
+
+	for (section = 0; section < sections; section++, shdr++) {
+		if (!(be32_to_cpu(shdr->sh_flags) & (SHF_WRITE | SHF_ALLOC |
+			SHF_EXECINSTR)))
+			continue;
+
+		for (id = 0; id < MAX_PE; id++)
+			if (pe_mask & (1 << id)) {
+				rc = pe_load_elf_section(id, elf_hdr, shdr,
+							 pfe->dev);
+				if (rc < 0)
+					goto err;
+			}
+	}
+
+	pfe_check_version_info(fw);
+
+	return 0;
+
+err:
+	return rc;
+}
+
+static int get_firmware_in_fdt(const u8 **pe_fw, const char *name)
+{
+	struct device_node *np;
+	const unsigned int *len;
+	const void *data;
+
+	if (!strcmp(name, CLASS_FIRMWARE_FILENAME)) {
+		/* The firmware should be inside the device tree. */
+		np = of_find_compatible_node(NULL, NULL,
+					     "fsl,pfe-class-firmware");
+		if (!np) {
+			pr_info("Failed to find the node\n");
+			return -ENOENT;
+		}
+
+		data = of_get_property(np, "fsl,class-firmware", NULL);
+		if (data) {
+			len = of_get_property(np, "length", NULL);
+			pr_info("CLASS fw of length %d bytes loaded from FDT.\n",
+				be32_to_cpu(*len));
+		} else {
+			pr_info("fsl,class-firmware not found!!!!\n");
+			return -ENOENT;
+		}
+		of_node_put(np);
+		*pe_fw = data;
+	} else if (!strcmp(name, TMU_FIRMWARE_FILENAME)) {
+		np = of_find_compatible_node(NULL, NULL,
+					     "fsl,pfe-tmu-firmware");
+		if (!np) {
+			pr_info("Failed to find the node\n");
+			return -ENOENT;
+		}
+
+		data = of_get_property(np, "fsl,tmu-firmware", NULL);
+		if (data) {
+			len = of_get_property(np, "length", NULL);
+			pr_info("TMU fw of length %d bytes loaded from FDT.\n",
+				be32_to_cpu(*len));
+		} else {
+			pr_info("fsl,tmu-firmware not found!!!!\n");
+			return -ENOENT;
+		}
+		of_node_put(np);
+		*pe_fw = data;
+	} else if (!strcmp(name, UTIL_FIRMWARE_FILENAME)) {
+		np = of_find_compatible_node(NULL, NULL,
+					     "fsl,pfe-util-firmware");
+		if (!np) {
+			pr_info("Failed to find the node\n");
+			return -ENOENT;
+		}
+
+		data = of_get_property(np, "fsl,util-firmware", NULL);
+		if (data) {
+			len = of_get_property(np, "length", NULL);
+			pr_info("UTIL fw of length %d bytes loaded from FDT.\n",
+				be32_to_cpu(*len));
+		} else {
+			pr_info("fsl,util-firmware not found!!!!\n");
+			return -ENOENT;
+		}
+		of_node_put(np);
+		*pe_fw = data;
+	} else {
+		pr_err("firmware:%s not known\n", name);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* PFE firmware initialization.
+ * Loads different firmware files from filesystem.
+ * Initializes PE IMEM/DMEM and UTIL-PE DDR
+ * Initializes control path symbol addresses (by looking them up in the elf
+ * firmware files
+ * Takes PE's out of reset
+ *
+ * @return	0 on success, a negative value on error
+ *
+ */
+int pfe_firmware_init(struct pfe *pfe)
+{
+	const struct firmware *class_fw, *tmu_fw;
+	const u8 *class_elf_fw, *tmu_elf_fw;
+	int rc = 0, fs_load = 0;
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+	const struct firmware *util_fw;
+	const u8 *util_elf_fw;
+
+#endif
+
+	pr_info("%s\n", __func__);
+
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+	if (get_firmware_in_fdt(&class_elf_fw, CLASS_FIRMWARE_FILENAME) ||
+	    get_firmware_in_fdt(&tmu_elf_fw, TMU_FIRMWARE_FILENAME) ||
+	    get_firmware_in_fdt(&util_elf_fw, UTIL_FIRMWARE_FILENAME))
+#else
+	if (get_firmware_in_fdt(&class_elf_fw, CLASS_FIRMWARE_FILENAME) ||
+	    get_firmware_in_fdt(&tmu_elf_fw, TMU_FIRMWARE_FILENAME))
+#endif
+	{
+		pr_info("%s:PFE firmware not found in FDT.\n", __func__);
+		pr_info("%s:Trying to load firmware from filesystem...!\n", __func__);
+
+		/* look for firmware in filesystem...!*/
+		fs_load = 1;
+		if (request_firmware(&class_fw, CLASS_FIRMWARE_FILENAME, pfe->dev)) {
+			pr_err("%s: request firmware %s failed\n", __func__,
+			       CLASS_FIRMWARE_FILENAME);
+			rc = -ETIMEDOUT;
+			goto err0;
+		}
+		class_elf_fw = class_fw->data;
+
+		if (request_firmware(&tmu_fw, TMU_FIRMWARE_FILENAME, pfe->dev)) {
+			pr_err("%s: request firmware %s failed\n", __func__,
+			       TMU_FIRMWARE_FILENAME);
+			rc = -ETIMEDOUT;
+			goto err1;
+		}
+		tmu_elf_fw = tmu_fw->data;
+
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+		if (request_firmware(&util_fw, UTIL_FIRMWARE_FILENAME, pfe->dev)) {
+			pr_err("%s: request firmware %s failed\n", __func__,
+			       UTIL_FIRMWARE_FILENAME);
+			rc = -ETIMEDOUT;
+			goto err2;
+		}
+		util_elf_fw = util_fw->data;
+#endif
+	}
+
+	rc = pfe_load_elf(CLASS_MASK, class_elf_fw, pfe);
+	if (rc < 0) {
+		pr_err("%s: class firmware load failed\n", __func__);
+		goto err3;
+	}
+
+#if defined(CFG_DIAGS)
+	rc = pfe_get_diags_info(class_elf_fw, &pfe->diags.class_diags_info);
+	if (rc < 0) {
+		pr_warn(
+			"PFE diags won't be available for class PEs\n");
+		rc = 0;
+	}
+#endif
+
+	rc = pfe_load_elf(TMU_MASK, tmu_elf_fw, pfe);
+	if (rc < 0) {
+		pr_err("%s: tmu firmware load failed\n", __func__);
+		goto err3;
+	}
+
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+	rc = pfe_load_elf(UTIL_MASK, util_elf_fw, pfe);
+	if (rc < 0) {
+		pr_err("%s: util firmware load failed\n", __func__);
+		goto err3;
+	}
+
+#if defined(CFG_DIAGS)
+	rc = pfe_get_diags_info(util_elf_fw, &pfe->diags.util_diags_info);
+	if (rc < 0) {
+		pr_warn(
+			"PFE diags won't be available for util PE\n");
+		rc = 0;
+	}
+#endif
+
+	util_enable();
+#endif
+
+	tmu_enable(0xf);
+	class_enable();
+
+err3:
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+	if (fs_load)
+		release_firmware(util_fw);
+err2:
+#endif
+	if (fs_load)
+		release_firmware(tmu_fw);
+
+err1:
+	if (fs_load)
+		release_firmware(class_fw);
+
+err0:
+	return rc;
+}
+
+/* PFE firmware cleanup
+ * Puts PE's in reset
+ *
+ *
+ */
+void pfe_firmware_exit(struct pfe *pfe)
+{
+	pr_info("%s\n", __func__);
+
+	if (pe_reset_all(&pfe->ctrl) != 0)
+		pr_err("Error: Failed to stop PEs, PFE reload may not work correctly\n");
+
+	class_disable();
+	tmu_disable(0xf);
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+	util_disable();
+#endif
+}
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_firmware.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#ifndef _PFE_FIRMWARE_H_
+#define _PFE_FIRMWARE_H_
+
+#define CLASS_FIRMWARE_FILENAME		"ppfe_class_ls1012a.elf"
+#define TMU_FIRMWARE_FILENAME		"ppfe_tmu_ls1012a.elf"
+#define UTIL_FIRMWARE_FILENAME		"ppfe_util_ls1012a.elf"
+
+#define PFE_FW_CHECK_PASS		0
+#define PFE_FW_CHECK_FAIL		1
+#define NUM_PFE_FW				3
+
+int pfe_firmware_init(struct pfe *pfe);
+void pfe_firmware_exit(struct pfe *pfe);
+
+#endif /* _PFE_FIRMWARE_H_ */
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_hal.c
@@ -0,0 +1,1517 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#include "pfe_mod.h"
+#include "pfe/pfe.h"
+
+/* A-010897: Jumbo frame is not supported */
+extern bool pfe_errata_a010897;
+
+#define PFE_RCR_MAX_FL_MASK	0xC000FFFF
+
+void *cbus_base_addr;
+void *ddr_base_addr;
+unsigned long ddr_phys_base_addr;
+unsigned int ddr_size;
+
+static struct pe_info pe[MAX_PE];
+
+/* Initializes the PFE library.
+ * Must be called before using any of the library functions.
+ *
+ * @param[in] cbus_base		CBUS virtual base address (as mapped in
+ * the host CPU address space)
+ * @param[in] ddr_base		PFE DDR range virtual base address (as
+ * mapped in the host CPU address space)
+ * @param[in] ddr_phys_base	PFE DDR range physical base address (as
+ * mapped in platform)
+ * @param[in] size		PFE DDR range size (as defined by the host
+ * software)
+ */
+void pfe_lib_init(void *cbus_base, void *ddr_base, unsigned long ddr_phys_base,
+		  unsigned int size)
+{
+	cbus_base_addr = cbus_base;
+	ddr_base_addr = ddr_base;
+	ddr_phys_base_addr = ddr_phys_base;
+	ddr_size = size;
+
+	pe[CLASS0_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(0);
+	pe[CLASS0_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(0);
+	pe[CLASS0_ID].pmem_size = CLASS_IMEM_SIZE;
+	pe[CLASS0_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA;
+	pe[CLASS0_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR;
+	pe[CLASS0_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA;
+
+	pe[CLASS1_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(1);
+	pe[CLASS1_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(1);
+	pe[CLASS1_ID].pmem_size = CLASS_IMEM_SIZE;
+	pe[CLASS1_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA;
+	pe[CLASS1_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR;
+	pe[CLASS1_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA;
+
+	pe[CLASS2_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(2);
+	pe[CLASS2_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(2);
+	pe[CLASS2_ID].pmem_size = CLASS_IMEM_SIZE;
+	pe[CLASS2_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA;
+	pe[CLASS2_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR;
+	pe[CLASS2_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA;
+
+	pe[CLASS3_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(3);
+	pe[CLASS3_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(3);
+	pe[CLASS3_ID].pmem_size = CLASS_IMEM_SIZE;
+	pe[CLASS3_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA;
+	pe[CLASS3_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR;
+	pe[CLASS3_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA;
+
+	pe[CLASS4_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(4);
+	pe[CLASS4_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(4);
+	pe[CLASS4_ID].pmem_size = CLASS_IMEM_SIZE;
+	pe[CLASS4_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA;
+	pe[CLASS4_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR;
+	pe[CLASS4_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA;
+
+	pe[CLASS5_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(5);
+	pe[CLASS5_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(5);
+	pe[CLASS5_ID].pmem_size = CLASS_IMEM_SIZE;
+	pe[CLASS5_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA;
+	pe[CLASS5_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR;
+	pe[CLASS5_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA;
+
+	pe[TMU0_ID].dmem_base_addr = TMU_DMEM_BASE_ADDR(0);
+	pe[TMU0_ID].pmem_base_addr = TMU_IMEM_BASE_ADDR(0);
+	pe[TMU0_ID].pmem_size = TMU_IMEM_SIZE;
+	pe[TMU0_ID].mem_access_wdata = TMU_MEM_ACCESS_WDATA;
+	pe[TMU0_ID].mem_access_addr = TMU_MEM_ACCESS_ADDR;
+	pe[TMU0_ID].mem_access_rdata = TMU_MEM_ACCESS_RDATA;
+
+	pe[TMU1_ID].dmem_base_addr = TMU_DMEM_BASE_ADDR(1);
+	pe[TMU1_ID].pmem_base_addr = TMU_IMEM_BASE_ADDR(1);
+	pe[TMU1_ID].pmem_size = TMU_IMEM_SIZE;
+	pe[TMU1_ID].mem_access_wdata = TMU_MEM_ACCESS_WDATA;
+	pe[TMU1_ID].mem_access_addr = TMU_MEM_ACCESS_ADDR;
+	pe[TMU1_ID].mem_access_rdata = TMU_MEM_ACCESS_RDATA;
+
+	pe[TMU3_ID].dmem_base_addr = TMU_DMEM_BASE_ADDR(3);
+	pe[TMU3_ID].pmem_base_addr = TMU_IMEM_BASE_ADDR(3);
+	pe[TMU3_ID].pmem_size = TMU_IMEM_SIZE;
+	pe[TMU3_ID].mem_access_wdata = TMU_MEM_ACCESS_WDATA;
+	pe[TMU3_ID].mem_access_addr = TMU_MEM_ACCESS_ADDR;
+	pe[TMU3_ID].mem_access_rdata = TMU_MEM_ACCESS_RDATA;
+
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+	pe[UTIL_ID].dmem_base_addr = UTIL_DMEM_BASE_ADDR;
+	pe[UTIL_ID].mem_access_wdata = UTIL_MEM_ACCESS_WDATA;
+	pe[UTIL_ID].mem_access_addr = UTIL_MEM_ACCESS_ADDR;
+	pe[UTIL_ID].mem_access_rdata = UTIL_MEM_ACCESS_RDATA;
+#endif
+}
+
+/* Writes a buffer to PE internal memory from the host
+ * through indirect access registers.
+ *
+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
+ * ..., UTIL_ID)
+ * @param[in] src		Buffer source address
+ * @param[in] mem_access_addr	DMEM destination address (must be 32bit
+ * aligned)
+ * @param[in] len		Number of bytes to copy
+ */
+static void pe_mem_memcpy_to32(int id, u32 mem_access_addr, const void *src,
+			       unsigned int len)
+{
+	u32 offset = 0, val, addr;
+	unsigned int len32 = len >> 2;
+	int i;
+
+	addr = mem_access_addr | PE_MEM_ACCESS_WRITE |
+		PE_MEM_ACCESS_BYTE_ENABLE(0, 4);
+
+	for (i = 0; i < len32; i++, offset += 4, src += 4) {
+		val = *(u32 *)src;
+		writel(cpu_to_be32(val), pe[id].mem_access_wdata);
+		writel(addr + offset, pe[id].mem_access_addr);
+	}
+
+	len = (len & 0x3);
+	if (len) {
+		val = 0;
+
+		addr = (mem_access_addr | PE_MEM_ACCESS_WRITE |
+			PE_MEM_ACCESS_BYTE_ENABLE(0, len)) + offset;
+
+		for (i = 0; i < len; i++, src++)
+			val |= (*(u8 *)src) << (8 * i);
+
+		writel(cpu_to_be32(val), pe[id].mem_access_wdata);
+		writel(addr, pe[id].mem_access_addr);
+	}
+}
+
+/* Writes a buffer to PE internal data memory (DMEM) from the host
+ * through indirect access registers.
+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
+ * ..., UTIL_ID)
+ * @param[in] src		Buffer source address
+ * @param[in] dst		DMEM destination address (must be 32bit
+ * aligned)
+ * @param[in] len		Number of bytes to copy
+ */
+void pe_dmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len)
+{
+	pe_mem_memcpy_to32(id, pe[id].dmem_base_addr | dst |
+				PE_MEM_ACCESS_DMEM, src, len);
+}
+
+/* Writes a buffer to PE internal program memory (PMEM) from the host
+ * through indirect access registers.
+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
+ * ..., TMU3_ID)
+ * @param[in] src		Buffer source address
+ * @param[in] dst		PMEM destination address (must be 32bit
+ * aligned)
+ * @param[in] len		Number of bytes to copy
+ */
+void pe_pmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len)
+{
+	pe_mem_memcpy_to32(id, pe[id].pmem_base_addr | (dst & (pe[id].pmem_size
+				- 1)) | PE_MEM_ACCESS_IMEM, src, len);
+}
+
+/* Reads PE internal program memory (IMEM) from the host
+ * through indirect access registers.
+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
+ * ..., TMU3_ID)
+ * @param[in] addr		PMEM read address (must be aligned on size)
+ * @param[in] size		Number of bytes to read (maximum 4, must not
+ * cross 32bit boundaries)
+ * @return			the data read (in PE endianness, i.e BE).
+ */
+u32 pe_pmem_read(int id, u32 addr, u8 size)
+{
+	u32 offset = addr & 0x3;
+	u32 mask = 0xffffffff >> ((4 - size) << 3);
+	u32 val;
+
+	addr = pe[id].pmem_base_addr | ((addr & ~0x3) & (pe[id].pmem_size - 1))
+		| PE_MEM_ACCESS_IMEM | PE_MEM_ACCESS_BYTE_ENABLE(offset, size);
+
+	writel(addr, pe[id].mem_access_addr);
+	val = be32_to_cpu(readl(pe[id].mem_access_rdata));
+
+	return (val >> (offset << 3)) & mask;
+}
+
+/* Writes PE internal data memory (DMEM) from the host
+ * through indirect access registers.
+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
+ * ..., UTIL_ID)
+ * @param[in] addr		DMEM write address (must be aligned on size)
+ * @param[in] val		Value to write (in PE endianness, i.e BE)
+ * @param[in] size		Number of bytes to write (maximum 4, must not
+ * cross 32bit boundaries)
+ */
+void pe_dmem_write(int id, u32 val, u32 addr, u8 size)
+{
+	u32 offset = addr & 0x3;
+
+	addr = pe[id].dmem_base_addr | (addr & ~0x3) | PE_MEM_ACCESS_WRITE |
+		PE_MEM_ACCESS_DMEM | PE_MEM_ACCESS_BYTE_ENABLE(offset, size);
+
+	/* Indirect access interface is byte swapping data being written */
+	writel(cpu_to_be32(val << (offset << 3)), pe[id].mem_access_wdata);
+	writel(addr, pe[id].mem_access_addr);
+}
+
+/* Reads PE internal data memory (DMEM) from the host
+ * through indirect access registers.
+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
+ * ..., UTIL_ID)
+ * @param[in] addr		DMEM read address (must be aligned on size)
+ * @param[in] size		Number of bytes to read (maximum 4, must not
+ * cross 32bit boundaries)
+ * @return			the data read (in PE endianness, i.e BE).
+ */
+u32 pe_dmem_read(int id, u32 addr, u8 size)
+{
+	u32 offset = addr & 0x3;
+	u32 mask = 0xffffffff >> ((4 - size) << 3);
+	u32 val;
+
+	addr = pe[id].dmem_base_addr | (addr & ~0x3) | PE_MEM_ACCESS_DMEM |
+			PE_MEM_ACCESS_BYTE_ENABLE(offset, size);
+
+	writel(addr, pe[id].mem_access_addr);
+
+	/* Indirect access interface is byte swapping data being read */
+	val = be32_to_cpu(readl(pe[id].mem_access_rdata));
+
+	return (val >> (offset << 3)) & mask;
+}
+
+/* This function is used to write to CLASS internal bus peripherals (ccu,
+ * pe-lem) from the host
+ * through indirect access registers.
+ * @param[in]	val	value to write
+ * @param[in]	addr	Address to write to (must be aligned on size)
+ * @param[in]	size	Number of bytes to write (1, 2 or 4)
+ *
+ */
+void class_bus_write(u32 val, u32 addr, u8 size)
+{
+	u32 offset = addr & 0x3;
+
+	writel((addr & CLASS_BUS_ACCESS_BASE_MASK), CLASS_BUS_ACCESS_BASE);
+
+	addr = (addr & ~CLASS_BUS_ACCESS_BASE_MASK) | PE_MEM_ACCESS_WRITE |
+			(size << 24);
+
+	writel(cpu_to_be32(val << (offset << 3)), CLASS_BUS_ACCESS_WDATA);
+	writel(addr, CLASS_BUS_ACCESS_ADDR);
+}
+
+/* Reads from CLASS internal bus peripherals (ccu, pe-lem) from the host
+ * through indirect access registers.
+ * @param[in] addr	Address to read from (must be aligned on size)
+ * @param[in] size	Number of bytes to read (1, 2 or 4)
+ * @return		the read data
+ *
+ */
+u32 class_bus_read(u32 addr, u8 size)
+{
+	u32 offset = addr & 0x3;
+	u32 mask = 0xffffffff >> ((4 - size) << 3);
+	u32 val;
+
+	writel((addr & CLASS_BUS_ACCESS_BASE_MASK), CLASS_BUS_ACCESS_BASE);
+
+	addr = (addr & ~CLASS_BUS_ACCESS_BASE_MASK) | (size << 24);
+
+	writel(addr, CLASS_BUS_ACCESS_ADDR);
+	val = be32_to_cpu(readl(CLASS_BUS_ACCESS_RDATA));
+
+	return (val >> (offset << 3)) & mask;
+}
+
+/* Writes data to the cluster memory (PE_LMEM)
+ * @param[in] dst	PE LMEM destination address (must be 32bit aligned)
+ * @param[in] src	Buffer source address
+ * @param[in] len	Number of bytes to copy
+ */
+void class_pe_lmem_memcpy_to32(u32 dst, const void *src, unsigned int len)
+{
+	u32 len32 = len >> 2;
+	int i;
+
+	for (i = 0; i < len32; i++, src += 4, dst += 4)
+		class_bus_write(*(u32 *)src, dst, 4);
+
+	if (len & 0x2) {
+		class_bus_write(*(u16 *)src, dst, 2);
+		src += 2;
+		dst += 2;
+	}
+
+	if (len & 0x1) {
+		class_bus_write(*(u8 *)src, dst, 1);
+		src++;
+		dst++;
+	}
+}
+
+/* Writes value to the cluster memory (PE_LMEM)
+ * @param[in] dst	PE LMEM destination address (must be 32bit aligned)
+ * @param[in] val	Value to write
+ * @param[in] len	Number of bytes to write
+ */
+void class_pe_lmem_memset(u32 dst, int val, unsigned int len)
+{
+	u32 len32 = len >> 2;
+	int i;
+
+	val = val | (val << 8) | (val << 16) | (val << 24);
+
+	for (i = 0; i < len32; i++, dst += 4)
+		class_bus_write(val, dst, 4);
+
+	if (len & 0x2) {
+		class_bus_write(val, dst, 2);
+		dst += 2;
+	}
+
+	if (len & 0x1) {
+		class_bus_write(val, dst, 1);
+		dst++;
+	}
+}
+
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+
+/* Writes UTIL program memory (DDR) from the host.
+ *
+ * @param[in] addr	Address to write (virtual, must be aligned on size)
+ * @param[in] val		Value to write (in PE endianness, i.e BE)
+ * @param[in] size		Number of bytes to write (2 or 4)
+ */
+static void util_pmem_write(u32 val, void *addr, u8 size)
+{
+	void *addr64 = (void *)((unsigned long)addr & ~0x7);
+	unsigned long off = 8 - ((unsigned long)addr & 0x7) - size;
+
+	/*
+	 * IMEM should  be loaded as a 64bit swapped value in a 64bit aligned
+	 * location
+	 */
+	if (size == 4)
+		writel(be32_to_cpu(val), addr64 + off);
+	else
+		writew(be16_to_cpu((u16)val), addr64 + off);
+}
+
+/* Writes a buffer to UTIL program memory (DDR) from the host.
+ *
+ * @param[in] dst	Address to write (virtual, must be at least 16bit
+ * aligned)
+ * @param[in] src	Buffer to write (in PE endianness, i.e BE, must have
+ * same alignment as dst)
+ * @param[in] len	Number of bytes to write (must be at least 16bit
+ * aligned)
+ */
+static void util_pmem_memcpy(void *dst, const void *src, unsigned int len)
+{
+	unsigned int len32;
+	int i;
+
+	if ((unsigned long)src & 0x2) {
+		util_pmem_write(*(u16 *)src, dst, 2);
+		src += 2;
+		dst += 2;
+		len -= 2;
+	}
+
+	len32 = len >> 2;
+
+	for (i = 0; i < len32; i++, dst += 4, src += 4)
+		util_pmem_write(*(u32 *)src, dst, 4);
+
+	if (len & 0x2)
+		util_pmem_write(*(u16 *)src, dst, len & 0x2);
+}
+#endif
+
+/* Loads an elf section into pmem
+ * Code needs to be at least 16bit aligned and only PROGBITS sections are
+ * supported
+ *
+ * @param[in] id	PE identification (CLASS0_ID, ..., TMU0_ID, ...,
+ * TMU3_ID)
+ * @param[in] data	pointer to the elf firmware
+ * @param[in] shdr	pointer to the elf section header
+ *
+ */
+static int pe_load_pmem_section(int id, const void *data,
+				struct elf32_shdr *shdr)
+{
+	u32 offset = be32_to_cpu(shdr->sh_offset);
+	u32 addr = be32_to_cpu(shdr->sh_addr);
+	u32 size = be32_to_cpu(shdr->sh_size);
+	u32 type = be32_to_cpu(shdr->sh_type);
+
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+	if (id == UTIL_ID) {
+		pr_err("%s: unsupported pmem section for UTIL\n",
+		       __func__);
+		return -EINVAL;
+	}
+#endif
+
+	if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3)) {
+		pr_err(
+			"%s: load address(%x) and elf file address(%lx) don't have the same alignment\n"
+			, __func__, addr, (unsigned long)data + offset);
+
+		return -EINVAL;
+	}
+
+	if (addr & 0x1) {
+		pr_err("%s: load address(%x) is not 16bit aligned\n",
+		       __func__, addr);
+		return -EINVAL;
+	}
+
+	if (size & 0x1) {
+		pr_err("%s: load size(%x) is not 16bit aligned\n",
+		       __func__, size);
+		return -EINVAL;
+	}
+
+	switch (type) {
+	case SHT_PROGBITS:
+		pe_pmem_memcpy_to32(id, addr, data + offset, size);
+
+		break;
+
+	default:
+		pr_err("%s: unsupported section type(%x)\n", __func__,
+		       type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* Loads an elf section into dmem
+ * Data needs to be at least 32bit aligned, NOBITS sections are correctly
+ * initialized to 0
+ *
+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
+ * ..., UTIL_ID)
+ * @param[in] data		pointer to the elf firmware
+ * @param[in] shdr		pointer to the elf section header
+ *
+ */
+static int pe_load_dmem_section(int id, const void *data,
+				struct elf32_shdr *shdr)
+{
+	u32 offset = be32_to_cpu(shdr->sh_offset);
+	u32 addr = be32_to_cpu(shdr->sh_addr);
+	u32 size = be32_to_cpu(shdr->sh_size);
+	u32 type = be32_to_cpu(shdr->sh_type);
+	u32 size32 = size >> 2;
+	int i;
+
+	if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3)) {
+		pr_err(
+			"%s: load address(%x) and elf file address(%lx) don't have the same alignment\n",
+			__func__, addr, (unsigned long)data + offset);
+
+		return -EINVAL;
+	}
+
+	if (addr & 0x3) {
+		pr_err("%s: load address(%x) is not 32bit aligned\n",
+		       __func__, addr);
+		return -EINVAL;
+	}
+
+	switch (type) {
+	case SHT_PROGBITS:
+		pe_dmem_memcpy_to32(id, addr, data + offset, size);
+		break;
+
+	case SHT_NOBITS:
+		for (i = 0; i < size32; i++, addr += 4)
+			pe_dmem_write(id, 0, addr, 4);
+
+		if (size & 0x3)
+			pe_dmem_write(id, 0, addr, size & 0x3);
+
+		break;
+
+	default:
+		pr_err("%s: unsupported section type(%x)\n", __func__,
+		       type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* Loads an elf section into DDR
+ * Data needs to be at least 32bit aligned, NOBITS sections are correctly
+ * initialized to 0
+ *
+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
+ * ..., UTIL_ID)
+ * @param[in] data		pointer to the elf firmware
+ * @param[in] shdr		pointer to the elf section header
+ *
+ */
+static int pe_load_ddr_section(int id, const void *data,
+			       struct elf32_shdr *shdr,
+			       struct device *dev) {
+	u32 offset = be32_to_cpu(shdr->sh_offset);
+	u32 addr = be32_to_cpu(shdr->sh_addr);
+	u32 size = be32_to_cpu(shdr->sh_size);
+	u32 type = be32_to_cpu(shdr->sh_type);
+	u32 flags = be32_to_cpu(shdr->sh_flags);
+
+	switch (type) {
+	case SHT_PROGBITS:
+		if (flags & SHF_EXECINSTR) {
+			if (id <= CLASS_MAX_ID) {
+				/* DO the loading only once in DDR */
+				if (id == CLASS0_ID) {
+					pr_err(
+						"%s: load address(%x) and elf file address(%lx) rcvd\n",
+						__func__, addr,
+						(unsigned long)data + offset);
+					if (((unsigned long)(data + offset)
+						& 0x3) != (addr & 0x3)) {
+						pr_err(
+							"%s: load address(%x) and elf file address(%lx) don't have the same alignment\n"
+							, __func__, addr,
+						(unsigned long)data + offset);
+
+						return -EINVAL;
+					}
+
+					if (addr & 0x1) {
+						pr_err(
+							"%s: load address(%x) is not 16bit aligned\n"
+							, __func__, addr);
+						return -EINVAL;
+					}
+
+					if (size & 0x1) {
+						pr_err(
+							"%s: load length(%x) is not 16bit aligned\n"
+							, __func__, size);
+						return -EINVAL;
+					}
+					memcpy(DDR_PHYS_TO_VIRT(
+						DDR_PFE_TO_PHYS(addr)),
+						data + offset, size);
+				}
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+			} else if (id == UTIL_ID) {
+				if (((unsigned long)(data + offset) & 0x3)
+					!= (addr & 0x3)) {
+					pr_err(
+						"%s: load address(%x) and elf file address(%lx) don't have the same alignment\n"
+						, __func__, addr,
+						(unsigned long)data + offset);
+
+					return -EINVAL;
+				}
+
+				if (addr & 0x1) {
+					pr_err(
+						"%s: load address(%x) is not 16bit aligned\n"
+						, __func__, addr);
+					return -EINVAL;
+				}
+
+				if (size & 0x1) {
+					pr_err(
+						"%s: load length(%x) is not 16bit aligned\n"
+						, __func__, size);
+					return -EINVAL;
+				}
+
+				util_pmem_memcpy(DDR_PHYS_TO_VIRT(
+							DDR_PFE_TO_PHYS(addr)),
+							data + offset, size);
+			}
+#endif
+			} else {
+				pr_err(
+					"%s: unsupported ddr section type(%x) for PE(%d)\n"
+						, __func__, type, id);
+				return -EINVAL;
+			}
+
+		} else {
+			memcpy(DDR_PHYS_TO_VIRT(DDR_PFE_TO_PHYS(addr)), data
+				+ offset, size);
+		}
+
+		break;
+
+	case SHT_NOBITS:
+		memset(DDR_PHYS_TO_VIRT(DDR_PFE_TO_PHYS(addr)), 0, size);
+
+		break;
+
+	default:
+		pr_err("%s: unsupported section type(%x)\n", __func__,
+		       type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* Loads an elf section into pe lmem
+ * Data needs to be at least 32bit aligned, NOBITS sections are correctly
+ * initialized to 0
+ *
+ * @param[in] id		PE identification (CLASS0_ID,..., CLASS5_ID)
+ * @param[in] data		pointer to the elf firmware
+ * @param[in] shdr		pointer to the elf section header
+ *
+ */
+static int pe_load_pe_lmem_section(int id, const void *data,
+				   struct elf32_shdr *shdr)
+{
+	u32 offset = be32_to_cpu(shdr->sh_offset);
+	u32 addr = be32_to_cpu(shdr->sh_addr);
+	u32 size = be32_to_cpu(shdr->sh_size);
+	u32 type = be32_to_cpu(shdr->sh_type);
+
+	if (id > CLASS_MAX_ID) {
+		pr_err(
+			"%s: unsupported pe-lmem section type(%x) for PE(%d)\n",
+			 __func__, type, id);
+		return -EINVAL;
+	}
+
+	if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3)) {
+		pr_err(
+			"%s: load address(%x) and elf file address(%lx) don't have the same alignment\n",
+			__func__, addr, (unsigned long)data + offset);
+
+		return -EINVAL;
+	}
+
+	if (addr & 0x3) {
+		pr_err("%s: load address(%x) is not 32bit aligned\n",
+		       __func__, addr);
+		return -EINVAL;
+	}
+
+	switch (type) {
+	case SHT_PROGBITS:
+		class_pe_lmem_memcpy_to32(addr, data + offset, size);
+		break;
+
+	case SHT_NOBITS:
+		class_pe_lmem_memset(addr, 0, size);
+		break;
+
+	default:
+		pr_err("%s: unsupported section type(%x)\n", __func__,
+		       type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* Loads an elf section into a PE
+ * For now only supports loading a section to dmem (all PE's), pmem (class and
+ * tmu PE's),
+ * DDDR (util PE code)
+ *
+ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID,
+ * ..., UTIL_ID)
+ * @param[in] data		pointer to the elf firmware
+ * @param[in] shdr		pointer to the elf section header
+ *
+ */
+int pe_load_elf_section(int id, const void *data, struct elf32_shdr *shdr,
+			struct device *dev) {
+	u32 addr = be32_to_cpu(shdr->sh_addr);
+	u32 size = be32_to_cpu(shdr->sh_size);
+
+	if (IS_DMEM(addr, size))
+		return pe_load_dmem_section(id, data, shdr);
+	else if (IS_PMEM(addr, size))
+		return pe_load_pmem_section(id, data, shdr);
+	else if (IS_PFE_LMEM(addr, size))
+		return 0;
+	else if (IS_PHYS_DDR(addr, size))
+		return pe_load_ddr_section(id, data, shdr, dev);
+	else if (IS_PE_LMEM(addr, size))
+		return pe_load_pe_lmem_section(id, data, shdr);
+
+	pr_err("%s: unsupported memory range(%x)\n", __func__,
+	       addr);
+	return 0;
+}
+
+/**************************** BMU ***************************/
+
+/* Initializes a BMU block.
+ * @param[in] base	BMU block base address
+ * @param[in] cfg	BMU configuration
+ */
+void bmu_init(void *base, struct BMU_CFG *cfg)
+{
+	bmu_disable(base);
+
+	bmu_set_config(base, cfg);
+
+	bmu_reset(base);
+}
+
+/* Resets a BMU block.
+ * @param[in] base	BMU block base address
+ */
+void bmu_reset(void *base)
+{
+	writel(CORE_SW_RESET, base + BMU_CTRL);
+
+	/* Wait for self clear */
+	while (readl(base + BMU_CTRL) & CORE_SW_RESET)
+		;
+}
+
+/* Enabled a BMU block.
+ * @param[in] base	BMU block base address
+ */
+void bmu_enable(void *base)
+{
+	writel(CORE_ENABLE, base + BMU_CTRL);
+}
+
+/* Disables a BMU block.
+ * @param[in] base	BMU block base address
+ */
+void bmu_disable(void *base)
+{
+	writel(CORE_DISABLE, base + BMU_CTRL);
+}
+
+/* Sets the configuration of a BMU block.
+ * @param[in] base	BMU block base address
+ * @param[in] cfg	BMU configuration
+ */
+void bmu_set_config(void *base, struct BMU_CFG *cfg)
+{
+	writel(cfg->baseaddr, base + BMU_UCAST_BASE_ADDR);
+	writel(cfg->count & 0xffff, base + BMU_UCAST_CONFIG);
+	writel(cfg->size & 0xffff, base + BMU_BUF_SIZE);
+
+	/* Interrupts are never used */
+	writel(cfg->low_watermark, base + BMU_LOW_WATERMARK);
+	writel(cfg->high_watermark, base + BMU_HIGH_WATERMARK);
+	writel(0x0, base + BMU_INT_ENABLE);
+}
+
+/**************************** MTIP GEMAC ***************************/
+
+/* Enable Rx Checksum Engine. With this enabled, Frame with bad IP,
+ *   TCP or UDP checksums are discarded
+ *
+ * @param[in] base	GEMAC base address.
+ */
+void gemac_enable_rx_checksum_offload(void *base)
+{
+	/*Do not find configuration to do this */
+}
+
+/* Disable Rx Checksum Engine.
+ *
+ * @param[in] base	GEMAC base address.
+ */
+void gemac_disable_rx_checksum_offload(void *base)
+{
+	/*Do not find configuration to do this */
+}
+
+/* GEMAC set speed.
+ * @param[in] base	GEMAC base address
+ * @param[in] speed	GEMAC speed (10, 100 or 1000 Mbps)
+ */
+void gemac_set_speed(void *base, enum mac_speed gem_speed)
+{
+	u32 ecr = readl(base + EMAC_ECNTRL_REG) & ~EMAC_ECNTRL_SPEED;
+	u32 rcr = readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_RMII_10T;
+
+	switch (gem_speed) {
+	case SPEED_10M:
+			rcr |= EMAC_RCNTRL_RMII_10T;
+			break;
+
+	case SPEED_1000M:
+			ecr |= EMAC_ECNTRL_SPEED;
+			break;
+
+	case SPEED_100M:
+	default:
+			/*It is in 100M mode */
+			break;
+	}
+	writel(ecr, (base + EMAC_ECNTRL_REG));
+	writel(rcr, (base + EMAC_RCNTRL_REG));
+}
+
+/* GEMAC set duplex.
+ * @param[in] base	GEMAC base address
+ * @param[in] duplex	GEMAC duplex mode (Full, Half)
+ */
+void gemac_set_duplex(void *base, int duplex)
+{
+	if (duplex == DUPLEX_HALF) {
+		writel(readl(base + EMAC_TCNTRL_REG) & ~EMAC_TCNTRL_FDEN, base
+			+ EMAC_TCNTRL_REG);
+		writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_DRT, (base
+			+ EMAC_RCNTRL_REG));
+	} else{
+		writel(readl(base + EMAC_TCNTRL_REG) | EMAC_TCNTRL_FDEN, base
+			+ EMAC_TCNTRL_REG);
+		writel(readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_DRT, (base
+			+ EMAC_RCNTRL_REG));
+	}
+}
+
+/* GEMAC set mode.
+ * @param[in] base	GEMAC base address
+ * @param[in] mode	GEMAC operation mode (MII, RMII, RGMII, SGMII)
+ */
+void gemac_set_mode(void *base, int mode)
+{
+	u32 val = readl(base + EMAC_RCNTRL_REG);
+
+	/*Remove loopbank*/
+	val &= ~EMAC_RCNTRL_LOOP;
+
+	/* Enable flow control and MII mode.PFE firmware always expects
+       CRC should be forwarded by MAC to validate CRC in software.*/
+	val |= (EMAC_RCNTRL_FCE | EMAC_RCNTRL_MII_MODE);
+
+	writel(val, base + EMAC_RCNTRL_REG);
+}
+
+/* GEMAC enable function.
+ * @param[in] base	GEMAC base address
+ */
+void gemac_enable(void *base)
+{
+	writel(readl(base + EMAC_ECNTRL_REG) | EMAC_ECNTRL_ETHER_EN, base +
+		EMAC_ECNTRL_REG);
+}
+
+/* GEMAC disable function.
+ * @param[in] base	GEMAC base address
+ */
+void gemac_disable(void *base)
+{
+	writel(readl(base + EMAC_ECNTRL_REG) & ~EMAC_ECNTRL_ETHER_EN, base +
+		EMAC_ECNTRL_REG);
+}
+
+/* GEMAC TX disable function.
+ * @param[in] base	GEMAC base address
+ */
+void gemac_tx_disable(void *base)
+{
+	writel(readl(base + EMAC_TCNTRL_REG) | EMAC_TCNTRL_GTS, base +
+		EMAC_TCNTRL_REG);
+}
+
+void gemac_tx_enable(void *base)
+{
+	writel(readl(base + EMAC_TCNTRL_REG) & ~EMAC_TCNTRL_GTS, base +
+			EMAC_TCNTRL_REG);
+}
+
+/* Sets the hash register of the MAC.
+ * This register is used for matching unicast and multicast frames.
+ *
+ * @param[in] base	GEMAC base address.
+ * @param[in] hash	64-bit hash to be configured.
+ */
+void gemac_set_hash(void *base, struct pfe_mac_addr *hash)
+{
+	writel(hash->bottom,  base + EMAC_GALR);
+	writel(hash->top, base + EMAC_GAUR);
+}
+
+void gemac_set_laddrN(void *base, struct pfe_mac_addr *address,
+		      unsigned int entry_index)
+{
+	if ((entry_index < 1) || (entry_index > EMAC_SPEC_ADDR_MAX))
+		return;
+
+	entry_index = entry_index - 1;
+	if (entry_index < 1) {
+		writel(htonl(address->bottom),  base + EMAC_PHY_ADDR_LOW);
+		writel((htonl(address->top) | 0x8808), base +
+			EMAC_PHY_ADDR_HIGH);
+	} else {
+		writel(htonl(address->bottom),  base + ((entry_index - 1) * 8)
+			+ EMAC_SMAC_0_0);
+		writel((htonl(address->top) | 0x8808), base + ((entry_index -
+			1) * 8) + EMAC_SMAC_0_1);
+	}
+}
+
+void gemac_clear_laddrN(void *base, unsigned int entry_index)
+{
+	if ((entry_index < 1) || (entry_index > EMAC_SPEC_ADDR_MAX))
+		return;
+
+	entry_index = entry_index - 1;
+	if (entry_index < 1) {
+		writel(0, base + EMAC_PHY_ADDR_LOW);
+		writel(0, base + EMAC_PHY_ADDR_HIGH);
+	} else {
+		writel(0,  base + ((entry_index - 1) * 8) + EMAC_SMAC_0_0);
+		writel(0, base + ((entry_index - 1) * 8) + EMAC_SMAC_0_1);
+	}
+}
+
+/* Set the loopback mode of the MAC.  This can be either no loopback for
+ * normal operation, local loopback through MAC internal loopback module or PHY
+ *   loopback for external loopback through a PHY.  This asserts the external
+ * loop pin.
+ *
+ * @param[in] base	GEMAC base address.
+ * @param[in] gem_loop	Loopback mode to be enabled. LB_LOCAL - MAC
+ * Loopback,
+ *			LB_EXT - PHY Loopback.
+ */
+void gemac_set_loop(void *base, enum mac_loop gem_loop)
+{
+	pr_info("%s()\n", __func__);
+	writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_LOOP, (base +
+		EMAC_RCNTRL_REG));
+}
+
+/* GEMAC allow frames
+ * @param[in] base	GEMAC base address
+ */
+void gemac_enable_copy_all(void *base)
+{
+	writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_PROM, (base +
+		EMAC_RCNTRL_REG));
+}
+
+/* GEMAC do not allow frames
+ * @param[in] base	GEMAC base address
+ */
+void gemac_disable_copy_all(void *base)
+{
+	writel(readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_PROM, (base +
+		EMAC_RCNTRL_REG));
+}
+
+/* GEMAC allow broadcast function.
+ * @param[in] base	GEMAC base address
+ */
+void gemac_allow_broadcast(void *base)
+{
+	writel(readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_BC_REJ, base +
+		EMAC_RCNTRL_REG);
+}
+
+/* GEMAC no broadcast function.
+ * @param[in] base	GEMAC base address
+ */
+void gemac_no_broadcast(void *base)
+{
+	writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_BC_REJ, base +
+		EMAC_RCNTRL_REG);
+}
+
+/* GEMAC enable 1536 rx function.
+ * @param[in]	base	GEMAC base address
+ */
+void gemac_enable_1536_rx(void *base)
+{
+	/* Set 1536 as Maximum frame length */
+	writel((readl(base + EMAC_RCNTRL_REG) & PFE_RCR_MAX_FL_MASK)
+		| (1536 << 16), base +	EMAC_RCNTRL_REG);
+}
+
+/* GEMAC set rx Max frame length.
+ * @param[in]	base	GEMAC base address
+ * @param[in]	mtu	new mtu
+ */
+void gemac_set_rx_max_fl(void *base, int mtu)
+{
+	/* Set mtu as Maximum frame length */
+	writel((readl(base + EMAC_RCNTRL_REG) & PFE_RCR_MAX_FL_MASK)
+		| (mtu << 16), base + EMAC_RCNTRL_REG);
+}
+
+/* GEMAC enable stacked vlan function.
+ * @param[in]	base	GEMAC base address
+ */
+void gemac_enable_stacked_vlan(void *base)
+{
+	/* MTIP doesn't support stacked vlan */
+}
+
+/* GEMAC enable pause rx function.
+ * @param[in] base	GEMAC base address
+ */
+void gemac_enable_pause_rx(void *base)
+{
+	writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_FCE,
+	       base + EMAC_RCNTRL_REG);
+}
+
+/* GEMAC disable pause rx function.
+ * @param[in] base	GEMAC base address
+ */
+void gemac_disable_pause_rx(void *base)
+{
+	writel(readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_FCE,
+	       base + EMAC_RCNTRL_REG);
+}
+
+/* GEMAC enable pause tx function.
+ * @param[in] base GEMAC base address
+ */
+static void __maybe_unused gemac_enable_pause_tx(void *base)
+{
+	writel(EMAC_RX_SECTION_EMPTY_V, base + EMAC_RX_SECTION_EMPTY);
+}
+
+/* GEMAC disable pause tx function.
+ * @param[in] base GEMAC base address
+ */
+static void __maybe_unused gemac_disable_pause_tx(void *base)
+{
+	writel(0x0, base + EMAC_RX_SECTION_EMPTY);
+}
+
+/* GEMAC wol configuration
+ * @param[in] base	GEMAC base address
+ * @param[in] wol_conf	WoL register configuration
+ */
+void gemac_set_wol(void *base, u32 wol_conf)
+{
+	u32  val = readl(base + EMAC_ECNTRL_REG);
+
+	if (wol_conf)
+		val |= (EMAC_ECNTRL_MAGIC_ENA | EMAC_ECNTRL_SLEEP);
+	else
+		val &= ~(EMAC_ECNTRL_MAGIC_ENA | EMAC_ECNTRL_SLEEP);
+	writel(val, base + EMAC_ECNTRL_REG);
+}
+
+/* Sets Gemac bus width to 64bit
+ * @param[in] base       GEMAC base address
+ * @param[in] width     gemac bus width to be set possible values are 32/64/128
+ */
+void gemac_set_bus_width(void *base, int width)
+{
+}
+
+/* Sets Gemac configuration.
+ * @param[in] base	GEMAC base address
+ * @param[in] cfg	GEMAC configuration
+ */
+void gemac_set_config(void *base, struct gemac_cfg *cfg)
+{
+	/*GEMAC config taken from VLSI */
+	writel(0x00000004, base + EMAC_TFWR_STR_FWD);
+	writel(0x00000005, base + EMAC_RX_SECTION_FULL);
+
+	if (pfe_errata_a010897)
+		writel(0x0000076c, base + EMAC_TRUNC_FL);
+	else
+		writel(0x00003fff, base + EMAC_TRUNC_FL);
+
+	writel(0x00000030, base + EMAC_TX_SECTION_EMPTY);
+	writel(0x00000000, base + EMAC_MIB_CTRL_STS_REG);
+
+	gemac_set_mode(base, cfg->mode);
+
+	gemac_set_speed(base, cfg->speed);
+
+	gemac_set_duplex(base, cfg->duplex);
+}
+
+/**************************** GPI ***************************/
+
+/* Initializes a GPI block.
+ * @param[in] base	GPI base address
+ * @param[in] cfg	GPI configuration
+ */
+void gpi_init(void *base, struct gpi_cfg *cfg)
+{
+	gpi_reset(base);
+
+	gpi_disable(base);
+
+	gpi_set_config(base, cfg);
+}
+
+/* Resets a GPI block.
+ * @param[in] base	GPI base address
+ */
+void gpi_reset(void *base)
+{
+	writel(CORE_SW_RESET, base + GPI_CTRL);
+}
+
+/* Enables a GPI block.
+ * @param[in] base	GPI base address
+ */
+void gpi_enable(void *base)
+{
+	writel(CORE_ENABLE, base + GPI_CTRL);
+}
+
+/* Disables a GPI block.
+ * @param[in] base	GPI base address
+ */
+void gpi_disable(void *base)
+{
+	writel(CORE_DISABLE, base + GPI_CTRL);
+}
+
+/* Sets the configuration of a GPI block.
+ * @param[in] base	GPI base address
+ * @param[in] cfg	GPI configuration
+ */
+void gpi_set_config(void *base, struct gpi_cfg *cfg)
+{
+	writel(CBUS_VIRT_TO_PFE(BMU1_BASE_ADDR + BMU_ALLOC_CTRL),	base
+		+ GPI_LMEM_ALLOC_ADDR);
+	writel(CBUS_VIRT_TO_PFE(BMU1_BASE_ADDR + BMU_FREE_CTRL),	base
+		+ GPI_LMEM_FREE_ADDR);
+	writel(CBUS_VIRT_TO_PFE(BMU2_BASE_ADDR + BMU_ALLOC_CTRL),	base
+		+ GPI_DDR_ALLOC_ADDR);
+	writel(CBUS_VIRT_TO_PFE(BMU2_BASE_ADDR + BMU_FREE_CTRL),	base
+		+ GPI_DDR_FREE_ADDR);
+	writel(CBUS_VIRT_TO_PFE(CLASS_INQ_PKTPTR), base + GPI_CLASS_ADDR);
+	writel(DDR_HDR_SIZE, base + GPI_DDR_DATA_OFFSET);
+	writel(LMEM_HDR_SIZE, base + GPI_LMEM_DATA_OFFSET);
+	writel(0, base + GPI_LMEM_SEC_BUF_DATA_OFFSET);
+	writel(0, base + GPI_DDR_SEC_BUF_DATA_OFFSET);
+	writel((DDR_HDR_SIZE << 16) |	LMEM_HDR_SIZE,	base + GPI_HDR_SIZE);
+	writel((DDR_BUF_SIZE << 16) |	LMEM_BUF_SIZE,	base + GPI_BUF_SIZE);
+
+	writel(((cfg->lmem_rtry_cnt << 16) | (GPI_DDR_BUF_EN << 1) |
+		GPI_LMEM_BUF_EN), base + GPI_RX_CONFIG);
+	writel(cfg->tmlf_txthres, base + GPI_TMLF_TX);
+	writel(cfg->aseq_len,	base + GPI_DTX_ASEQ);
+	writel(1, base + GPI_TOE_CHKSUM_EN);
+
+	if (cfg->mtip_pause_reg) {
+		writel(cfg->mtip_pause_reg, base + GPI_CSR_MTIP_PAUSE_REG);
+		writel(EGPI_PAUSE_TIME, base + GPI_TX_PAUSE_TIME);
+	}
+}
+
+/**************************** CLASSIFIER ***************************/
+
+/* Initializes CLASSIFIER block.
+ * @param[in] cfg	CLASSIFIER configuration
+ */
+void class_init(struct class_cfg *cfg)
+{
+	class_reset();
+
+	class_disable();
+
+	class_set_config(cfg);
+}
+
+/* Resets CLASSIFIER block.
+ *
+ */
+void class_reset(void)
+{
+	writel(CORE_SW_RESET, CLASS_TX_CTRL);
+}
+
+/* Enables all CLASS-PE's cores.
+ *
+ */
+void class_enable(void)
+{
+	writel(CORE_ENABLE, CLASS_TX_CTRL);
+}
+
+/* Disables all CLASS-PE's cores.
+ *
+ */
+void class_disable(void)
+{
+	writel(CORE_DISABLE, CLASS_TX_CTRL);
+}
+
+/*
+ * Sets the configuration of the CLASSIFIER block.
+ * @param[in] cfg	CLASSIFIER configuration
+ */
+void class_set_config(struct class_cfg *cfg)
+{
+	u32 val;
+
+	/* Initialize route table */
+	if (!cfg->resume)
+		memset(DDR_PHYS_TO_VIRT(cfg->route_table_baseaddr), 0, (1 <<
+		cfg->route_table_hash_bits) * CLASS_ROUTE_SIZE);
+
+#if !defined(LS1012A_PFE_RESET_WA)
+	writel(cfg->pe_sys_clk_ratio,	CLASS_PE_SYS_CLK_RATIO);
+#endif
+
+	writel((DDR_HDR_SIZE << 16) | LMEM_HDR_SIZE,	CLASS_HDR_SIZE);
+	writel(LMEM_BUF_SIZE,				CLASS_LMEM_BUF_SIZE);
+	writel(CLASS_ROUTE_ENTRY_SIZE(CLASS_ROUTE_SIZE) |
+		CLASS_ROUTE_HASH_SIZE(cfg->route_table_hash_bits),
+		CLASS_ROUTE_HASH_ENTRY_SIZE);
+	writel(HIF_PKT_CLASS_EN | HIF_PKT_OFFSET(sizeof(struct hif_hdr)),
+	       CLASS_HIF_PARSE);
+
+	val = HASH_CRC_PORT_IP | QB2BUS_LE;
+
+#if defined(CONFIG_IP_ALIGNED)
+	val |= IP_ALIGNED;
+#endif
+
+	/*
+	 *  Class PE packet steering will only work if TOE mode, bridge fetch or
+	 * route fetch are enabled (see class/qb_fet.v). Route fetch would
+	 * trigger additional memory copies (likely from DDR because of hash
+	 * table size, which cannot be reduced because PE software still
+	 * relies on hash value computed in HW), so when not in TOE mode we
+	 * simply enable HW bridge fetch even though we don't use it.
+	 */
+	if (cfg->toe_mode)
+		val |= CLASS_TOE;
+	else
+		val |= HW_BRIDGE_FETCH;
+
+	writel(val, CLASS_ROUTE_MULTI);
+
+	writel(DDR_PHYS_TO_PFE(cfg->route_table_baseaddr),
+	       CLASS_ROUTE_TABLE_BASE);
+	writel(CLASS_PE0_RO_DM_ADDR0_VAL,		CLASS_PE0_RO_DM_ADDR0);
+	writel(CLASS_PE0_RO_DM_ADDR1_VAL,		CLASS_PE0_RO_DM_ADDR1);
+	writel(CLASS_PE0_QB_DM_ADDR0_VAL,		CLASS_PE0_QB_DM_ADDR0);
+	writel(CLASS_PE0_QB_DM_ADDR1_VAL,		CLASS_PE0_QB_DM_ADDR1);
+	writel(CBUS_VIRT_TO_PFE(TMU_PHY_INQ_PKTPTR),	CLASS_TM_INQ_ADDR);
+
+	writel(23, CLASS_AFULL_THRES);
+	writel(23, CLASS_TSQ_FIFO_THRES);
+
+	writel(24, CLASS_MAX_BUF_CNT);
+	writel(24, CLASS_TSQ_MAX_CNT);
+}
+
+/**************************** TMU ***************************/
+
+void tmu_reset(void)
+{
+	writel(SW_RESET, TMU_CTRL);
+}
+
+/* Initializes TMU block.
+ * @param[in] cfg	TMU configuration
+ */
+void tmu_init(struct tmu_cfg *cfg)
+{
+	int q, phyno;
+
+	tmu_disable(0xF);
+	mdelay(10);
+
+#if !defined(LS1012A_PFE_RESET_WA)
+	/* keep in soft reset */
+	writel(SW_RESET, TMU_CTRL);
+#endif
+	writel(0x3, TMU_SYS_GENERIC_CONTROL);
+	writel(750, TMU_INQ_WATERMARK);
+	writel(CBUS_VIRT_TO_PFE(EGPI1_BASE_ADDR +
+		GPI_INQ_PKTPTR),	TMU_PHY0_INQ_ADDR);
+	writel(CBUS_VIRT_TO_PFE(EGPI2_BASE_ADDR +
+		GPI_INQ_PKTPTR),	TMU_PHY1_INQ_ADDR);
+	writel(CBUS_VIRT_TO_PFE(HGPI_BASE_ADDR +
+		GPI_INQ_PKTPTR),	TMU_PHY3_INQ_ADDR);
+	writel(CBUS_VIRT_TO_PFE(HIF_NOCPY_RX_INQ0_PKTPTR), TMU_PHY4_INQ_ADDR);
+	writel(CBUS_VIRT_TO_PFE(UTIL_INQ_PKTPTR), TMU_PHY5_INQ_ADDR);
+	writel(CBUS_VIRT_TO_PFE(BMU2_BASE_ADDR + BMU_FREE_CTRL),
+	       TMU_BMU_INQ_ADDR);
+
+	writel(0x3FF,	TMU_TDQ0_SCH_CTRL);	/*
+						 * enabling all 10
+						 * schedulers [9:0] of each TDQ
+						 */
+	writel(0x3FF,	TMU_TDQ1_SCH_CTRL);
+	writel(0x3FF,	TMU_TDQ3_SCH_CTRL);
+
+#if !defined(LS1012A_PFE_RESET_WA)
+	writel(cfg->pe_sys_clk_ratio,	TMU_PE_SYS_CLK_RATIO);
+#endif
+
+#if !defined(LS1012A_PFE_RESET_WA)
+	writel(DDR_PHYS_TO_PFE(cfg->llm_base_addr),	TMU_LLM_BASE_ADDR);
+	/* Extra packet pointers will be stored from this address onwards */
+
+	writel(cfg->llm_queue_len,	TMU_LLM_QUE_LEN);
+	writel(5,			TMU_TDQ_IIFG_CFG);
+	writel(DDR_BUF_SIZE,		TMU_BMU_BUF_SIZE);
+
+	writel(0x0,			TMU_CTRL);
+
+	/* MEM init */
+	pr_info("%s: mem init\n", __func__);
+	writel(MEM_INIT,	TMU_CTRL);
+
+	while (!(readl(TMU_CTRL) & MEM_INIT_DONE))
+		;
+
+	/* LLM init */
+	pr_info("%s: lmem init\n", __func__);
+	writel(LLM_INIT,	TMU_CTRL);
+
+	while (!(readl(TMU_CTRL) & LLM_INIT_DONE))
+		;
+#endif
+	/* set up each queue for tail drop */
+	for (phyno = 0; phyno < 4; phyno++) {
+		if (phyno == 2)
+			continue;
+		for (q = 0; q < 16; q++) {
+			u32 qdepth;
+
+			writel((phyno << 8) | q, TMU_TEQ_CTRL);
+			writel(1 << 22, TMU_TEQ_QCFG); /*Enable tail drop */
+
+			if (phyno == 3)
+				qdepth = DEFAULT_TMU3_QDEPTH;
+			else
+				qdepth = (q == 0) ? DEFAULT_Q0_QDEPTH :
+						DEFAULT_MAX_QDEPTH;
+
+			/* LOG: 68855 */
+			/*
+			 * The following is a workaround for the reordered
+			 * packet and BMU2 buffer leakage issue.
+			 */
+			if (CHIP_REVISION() == 0)
+				qdepth = 31;
+
+			writel(qdepth << 18, TMU_TEQ_HW_PROB_CFG2);
+			writel(qdepth >> 14, TMU_TEQ_HW_PROB_CFG3);
+		}
+	}
+
+#ifdef CFG_LRO
+	/* Set TMU-3 queue 5 (LRO) in no-drop mode */
+	writel((3 << 8) | TMU_QUEUE_LRO, TMU_TEQ_CTRL);
+	writel(0, TMU_TEQ_QCFG);
+#endif
+
+	writel(0x05, TMU_TEQ_DISABLE_DROPCHK);
+
+	writel(0x0, TMU_CTRL);
+}
+
+/* Enables TMU-PE cores.
+ * @param[in] pe_mask	TMU PE mask
+ */
+void tmu_enable(u32 pe_mask)
+{
+	writel(readl(TMU_TX_CTRL) | (pe_mask & 0xF), TMU_TX_CTRL);
+}
+
+/* Disables TMU cores.
+ * @param[in] pe_mask	TMU PE mask
+ */
+void tmu_disable(u32 pe_mask)
+{
+	writel(readl(TMU_TX_CTRL) & ~(pe_mask & 0xF), TMU_TX_CTRL);
+}
+
+/* This will return the tmu queue status
+ * @param[in] if_id	gem interface id or TMU index
+ * @return		returns the bit mask of busy queues, zero means all
+ * queues are empty
+ */
+u32 tmu_qstatus(u32 if_id)
+{
+	return cpu_to_be32(pe_dmem_read(TMU0_ID + if_id, TMU_DM_PESTATUS +
+		offsetof(struct pe_status, tmu_qstatus), 4));
+}
+
+u32 tmu_pkts_processed(u32 if_id)
+{
+	return cpu_to_be32(pe_dmem_read(TMU0_ID + if_id, TMU_DM_PESTATUS +
+		offsetof(struct pe_status, rx), 4));
+}
+
+/**************************** UTIL ***************************/
+
+/* Resets UTIL block.
+ */
+void util_reset(void)
+{
+	writel(CORE_SW_RESET, UTIL_TX_CTRL);
+}
+
+/* Initializes UTIL block.
+ * @param[in] cfg	UTIL configuration
+ */
+void util_init(struct util_cfg *cfg)
+{
+	writel(cfg->pe_sys_clk_ratio,   UTIL_PE_SYS_CLK_RATIO);
+}
+
+/* Enables UTIL-PE core.
+ *
+ */
+void util_enable(void)
+{
+	writel(CORE_ENABLE, UTIL_TX_CTRL);
+}
+
+/* Disables UTIL-PE core.
+ *
+ */
+void util_disable(void)
+{
+	writel(CORE_DISABLE, UTIL_TX_CTRL);
+}
+
+/**************************** HIF ***************************/
+/* Initializes HIF copy block.
+ *
+ */
+void hif_init(void)
+{
+	/*Initialize HIF registers*/
+	writel((HIF_RX_POLL_CTRL_CYCLE << 16) | HIF_TX_POLL_CTRL_CYCLE,
+	       HIF_POLL_CTRL);
+}
+
+/* Enable hif tx DMA and interrupt
+ *
+ */
+void hif_tx_enable(void)
+{
+	writel(HIF_CTRL_DMA_EN, HIF_TX_CTRL);
+	writel((readl(HIF_INT_ENABLE) | HIF_INT_EN | HIF_TXPKT_INT_EN),
+	       HIF_INT_ENABLE);
+}
+
+/* Disable hif tx DMA and interrupt
+ *
+ */
+void hif_tx_disable(void)
+{
+	u32	hif_int;
+
+	writel(0, HIF_TX_CTRL);
+
+	hif_int = readl(HIF_INT_ENABLE);
+	hif_int &= HIF_TXPKT_INT_EN;
+	writel(hif_int, HIF_INT_ENABLE);
+}
+
+/* Enable hif rx DMA and interrupt
+ *
+ */
+void hif_rx_enable(void)
+{
+	hif_rx_dma_start();
+	writel((readl(HIF_INT_ENABLE) | HIF_INT_EN | HIF_RXPKT_INT_EN),
+	       HIF_INT_ENABLE);
+}
+
+/* Disable hif rx DMA and interrupt
+ *
+ */
+void hif_rx_disable(void)
+{
+	u32	hif_int;
+
+	writel(0, HIF_RX_CTRL);
+
+	hif_int = readl(HIF_INT_ENABLE);
+	hif_int &= HIF_RXPKT_INT_EN;
+	writel(hif_int, HIF_INT_ENABLE);
+}
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_hif.c
@@ -0,0 +1,1063 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/kthread.h>
+#include <linux/slab.h>
+
+#include <linux/io.h>
+#include <asm/irq.h>
+
+#include "pfe_mod.h"
+
+#define HIF_INT_MASK	(HIF_INT | HIF_RXPKT_INT | HIF_TXPKT_INT)
+
+unsigned char napi_first_batch;
+
+static void pfe_tx_do_cleanup(unsigned long data);
+
+static int pfe_hif_alloc_descr(struct pfe_hif *hif)
+{
+	void *addr;
+	dma_addr_t dma_addr;
+	int err = 0;
+
+	pr_info("%s\n", __func__);
+	addr = dma_alloc_coherent(pfe->dev,
+				  HIF_RX_DESC_NT * sizeof(struct hif_desc) +
+				  HIF_TX_DESC_NT * sizeof(struct hif_desc),
+				  &dma_addr, GFP_KERNEL);
+
+	if (!addr) {
+		pr_err("%s: Could not allocate buffer descriptors!\n"
+			, __func__);
+		err = -ENOMEM;
+		goto err0;
+	}
+
+	hif->descr_baseaddr_p = dma_addr;
+	hif->descr_baseaddr_v = addr;
+	hif->rx_ring_size = HIF_RX_DESC_NT;
+	hif->tx_ring_size = HIF_TX_DESC_NT;
+
+	return 0;
+
+err0:
+	return err;
+}
+
+#if defined(LS1012A_PFE_RESET_WA)
+static void pfe_hif_disable_rx_desc(struct pfe_hif *hif)
+{
+	int ii;
+	struct hif_desc	*desc = hif->rx_base;
+
+	/*Mark all descriptors as LAST_BD */
+	for (ii = 0; ii < hif->rx_ring_size; ii++) {
+		desc->ctrl |= BD_CTRL_LAST_BD;
+		desc++;
+	}
+}
+
+struct class_rx_hdr_t {
+	u32     next_ptr;       /* ptr to the start of the first DDR buffer */
+	u16     length;         /* total packet length */
+	u16     phyno;          /* input physical port number */
+	u32     status;         /* gemac status bits */
+	u32     status2;            /* reserved for software usage */
+};
+
+/* STATUS_BAD_FRAME_ERR is set for all errors (including checksums if enabled)
+ * except overflow
+ */
+#define STATUS_BAD_FRAME_ERR            BIT(16)
+#define STATUS_LENGTH_ERR               BIT(17)
+#define STATUS_CRC_ERR                  BIT(18)
+#define STATUS_TOO_SHORT_ERR            BIT(19)
+#define STATUS_TOO_LONG_ERR             BIT(20)
+#define STATUS_CODE_ERR                 BIT(21)
+#define STATUS_MC_HASH_MATCH            BIT(22)
+#define STATUS_CUMULATIVE_ARC_HIT       BIT(23)
+#define STATUS_UNICAST_HASH_MATCH       BIT(24)
+#define STATUS_IP_CHECKSUM_CORRECT      BIT(25)
+#define STATUS_TCP_CHECKSUM_CORRECT     BIT(26)
+#define STATUS_UDP_CHECKSUM_CORRECT     BIT(27)
+#define STATUS_OVERFLOW_ERR             BIT(28) /* GPI error */
+#define MIN_PKT_SIZE			64
+
+static inline void copy_to_lmem(u32 *dst, u32 *src, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i += sizeof(u32))	{
+		*dst = htonl(*src);
+		dst++; src++;
+	}
+}
+
+static void send_dummy_pkt_to_hif(void)
+{
+	void *lmem_ptr, *ddr_ptr, *lmem_virt_addr;
+	u32 physaddr;
+	struct class_rx_hdr_t local_hdr;
+	static u32 dummy_pkt[] =  {
+		0x33221100, 0x2b785544, 0xd73093cb, 0x01000608,
+		0x04060008, 0x2b780200, 0xd73093cb, 0x0a01a8c0,
+		0x33221100, 0xa8c05544, 0x00000301, 0x00000000,
+		0x00000000, 0x00000000, 0x00000000, 0xbe86c51f };
+
+	ddr_ptr = (void *)((u64)readl(BMU2_BASE_ADDR + BMU_ALLOC_CTRL));
+	if (!ddr_ptr)
+		return;
+
+	lmem_ptr = (void *)((u64)readl(BMU1_BASE_ADDR + BMU_ALLOC_CTRL));
+	if (!lmem_ptr)
+		return;
+
+	pr_info("Sending a dummy pkt to HIF %p %p\n", ddr_ptr, lmem_ptr);
+	physaddr = (u32)DDR_VIRT_TO_PFE(ddr_ptr);
+
+	lmem_virt_addr = (void *)CBUS_PFE_TO_VIRT((unsigned long int)lmem_ptr);
+
+	local_hdr.phyno = htons(0); /* RX_PHY_0 */
+	local_hdr.length = htons(MIN_PKT_SIZE);
+
+	local_hdr.next_ptr = htonl((u32)physaddr);
+	/*Mark checksum is correct */
+	local_hdr.status = htonl((STATUS_IP_CHECKSUM_CORRECT |
+				STATUS_UDP_CHECKSUM_CORRECT |
+				STATUS_TCP_CHECKSUM_CORRECT |
+				STATUS_UNICAST_HASH_MATCH |
+				STATUS_CUMULATIVE_ARC_HIT));
+	local_hdr.status2 = 0;
+
+	copy_to_lmem((u32 *)lmem_virt_addr, (u32 *)&local_hdr,
+		     sizeof(local_hdr));
+
+	copy_to_lmem((u32 *)(lmem_virt_addr + LMEM_HDR_SIZE), (u32 *)dummy_pkt,
+		     0x40);
+
+	writel((unsigned long int)lmem_ptr, CLASS_INQ_PKTPTR);
+}
+
+void pfe_hif_rx_idle(struct pfe_hif *hif)
+{
+	int hif_stop_loop = 10;
+	u32 rx_status;
+
+	pfe_hif_disable_rx_desc(hif);
+	pr_info("Bringing hif to idle state...");
+	writel(0, HIF_INT_ENABLE);
+	/*If HIF Rx BDP is busy send a dummy packet */
+	do {
+		rx_status = readl(HIF_RX_STATUS);
+		if (rx_status & BDP_CSR_RX_DMA_ACTV)
+			send_dummy_pkt_to_hif();
+
+		usleep_range(100, 150);
+	} while (--hif_stop_loop);
+
+	if (readl(HIF_RX_STATUS) & BDP_CSR_RX_DMA_ACTV)
+		pr_info("Failed\n");
+	else
+		pr_info("Done\n");
+}
+#endif
+
+static void pfe_hif_free_descr(struct pfe_hif *hif)
+{
+	pr_info("%s\n", __func__);
+
+	dma_free_coherent(pfe->dev,
+			  hif->rx_ring_size * sizeof(struct hif_desc) +
+			  hif->tx_ring_size * sizeof(struct hif_desc),
+			  hif->descr_baseaddr_v, hif->descr_baseaddr_p);
+}
+
+static void __maybe_unused pfe_hif_desc_dump(struct pfe_hif *hif)
+{
+	struct hif_desc	*desc;
+	unsigned long desc_p;
+	int ii = 0;
+
+	pr_info("%s\n", __func__);
+
+	desc = hif->rx_base;
+	desc_p = (u32)((u64)desc - (u64)hif->descr_baseaddr_v +
+			hif->descr_baseaddr_p);
+
+	pr_info("HIF Rx desc base %p physical %x\n", desc, (u32)desc_p);
+	for (ii = 0; ii < hif->rx_ring_size; ii++) {
+		pr_info("status: %08x, ctrl: %08x, data: %08x, next: %x\n",
+			readl(&desc->status), readl(&desc->ctrl),
+			readl(&desc->data), readl(&desc->next));
+			desc++;
+	}
+
+	desc = hif->tx_base;
+	desc_p = ((u64)desc - (u64)hif->descr_baseaddr_v +
+			hif->descr_baseaddr_p);
+
+	pr_info("HIF Tx desc base %p physical %x\n", desc, (u32)desc_p);
+	for (ii = 0; ii < hif->tx_ring_size; ii++) {
+		pr_info("status: %08x, ctrl: %08x, data: %08x, next: %x\n",
+			readl(&desc->status), readl(&desc->ctrl),
+			readl(&desc->data), readl(&desc->next));
+		desc++;
+	}
+}
+
+/* pfe_hif_release_buffers */
+static void pfe_hif_release_buffers(struct pfe_hif *hif)
+{
+	struct hif_desc	*desc;
+	int i = 0;
+
+	hif->rx_base = hif->descr_baseaddr_v;
+
+	pr_info("%s\n", __func__);
+
+	/*Free Rx buffers */
+	desc = hif->rx_base;
+	for (i = 0; i < hif->rx_ring_size; i++) {
+		if (readl(&desc->data)) {
+			if ((i < hif->shm->rx_buf_pool_cnt) &&
+			    (!hif->shm->rx_buf_pool[i])) {
+				/*
+				 * dma_unmap_single(hif->dev, desc->data,
+				 * hif->rx_buf_len[i], DMA_FROM_DEVICE);
+				 */
+				dma_unmap_single(hif->dev,
+						 DDR_PFE_TO_PHYS(
+						 readl(&desc->data)),
+						 hif->rx_buf_len[i],
+						 DMA_FROM_DEVICE);
+				hif->shm->rx_buf_pool[i] = hif->rx_buf_addr[i];
+			} else {
+				pr_err("%s: buffer pool already full\n"
+					, __func__);
+			}
+		}
+
+		writel(0, &desc->data);
+		writel(0, &desc->status);
+		writel(0, &desc->ctrl);
+		desc++;
+	}
+}
+
+/*
+ * pfe_hif_init_buffers
+ * This function initializes the HIF Rx/Tx ring descriptors and
+ * initialize Rx queue with buffers.
+ */
+static int pfe_hif_init_buffers(struct pfe_hif *hif)
+{
+	struct hif_desc	*desc, *first_desc_p;
+	u32 data;
+	int i = 0;
+
+	pr_info("%s\n", __func__);
+
+	/* Check enough Rx buffers available in the shared memory */
+	if (hif->shm->rx_buf_pool_cnt < hif->rx_ring_size)
+		return -ENOMEM;
+
+	hif->rx_base = hif->descr_baseaddr_v;
+	memset(hif->rx_base, 0, hif->rx_ring_size * sizeof(struct hif_desc));
+
+	/*Initialize Rx descriptors */
+	desc = hif->rx_base;
+	first_desc_p = (struct hif_desc *)hif->descr_baseaddr_p;
+
+	for (i = 0; i < hif->rx_ring_size; i++) {
+		/* Initialize Rx buffers from the shared memory */
+
+		data = (u32)dma_map_single(hif->dev, hif->shm->rx_buf_pool[i],
+				pfe_pkt_size, DMA_FROM_DEVICE);
+		hif->rx_buf_addr[i] = hif->shm->rx_buf_pool[i];
+		hif->rx_buf_len[i] = pfe_pkt_size;
+		hif->shm->rx_buf_pool[i] = NULL;
+
+		if (likely(dma_mapping_error(hif->dev, data) == 0)) {
+			writel(DDR_PHYS_TO_PFE(data), &desc->data);
+		} else {
+			pr_err("%s : low on mem\n",  __func__);
+
+			goto err;
+		}
+
+		writel(0, &desc->status);
+
+		/*
+		 * Ensure everything else is written to DDR before
+		 * writing bd->ctrl
+		 */
+		wmb();
+
+		writel((BD_CTRL_PKT_INT_EN | BD_CTRL_LIFM
+			| BD_CTRL_DIR | BD_CTRL_DESC_EN
+			| BD_BUF_LEN(pfe_pkt_size)), &desc->ctrl);
+
+		/* Chain descriptors */
+		writel((u32)DDR_PHYS_TO_PFE(first_desc_p + i + 1), &desc->next);
+		desc++;
+	}
+
+	/* Overwrite last descriptor to chain it to first one*/
+	desc--;
+	writel((u32)DDR_PHYS_TO_PFE(first_desc_p), &desc->next);
+
+	hif->rxtoclean_index = 0;
+
+	/*Initialize Rx buffer descriptor ring base address */
+	writel(DDR_PHYS_TO_PFE(hif->descr_baseaddr_p), HIF_RX_BDP_ADDR);
+
+	hif->tx_base = hif->rx_base + hif->rx_ring_size;
+	first_desc_p = (struct hif_desc *)hif->descr_baseaddr_p +
+				hif->rx_ring_size;
+	memset(hif->tx_base, 0, hif->tx_ring_size * sizeof(struct hif_desc));
+
+	/*Initialize tx descriptors */
+	desc = hif->tx_base;
+
+	for (i = 0; i < hif->tx_ring_size; i++) {
+		/* Chain descriptors */
+		writel((u32)DDR_PHYS_TO_PFE(first_desc_p + i + 1), &desc->next);
+		writel(0, &desc->ctrl);
+		desc++;
+	}
+
+	/* Overwrite last descriptor to chain it to first one */
+	desc--;
+	writel((u32)DDR_PHYS_TO_PFE(first_desc_p), &desc->next);
+	hif->txavail = hif->tx_ring_size;
+	hif->txtosend = 0;
+	hif->txtoclean = 0;
+	hif->txtoflush = 0;
+
+	/*Initialize Tx buffer descriptor ring base address */
+	writel((u32)DDR_PHYS_TO_PFE(first_desc_p), HIF_TX_BDP_ADDR);
+
+	return 0;
+
+err:
+	pfe_hif_release_buffers(hif);
+	return -ENOMEM;
+}
+
+/*
+ * pfe_hif_client_register
+ *
+ * This function used to register a client driver with the HIF driver.
+ *
+ * Return value:
+ * 0 - on Successful registration
+ */
+static int pfe_hif_client_register(struct pfe_hif *hif, u32 client_id,
+				   struct hif_client_shm *client_shm)
+{
+	struct hif_client *client = &hif->client[client_id];
+	u32 i, cnt;
+	struct rx_queue_desc *rx_qbase;
+	struct tx_queue_desc *tx_qbase;
+	struct hif_rx_queue *rx_queue;
+	struct hif_tx_queue *tx_queue;
+	int err = 0;
+
+	pr_info("%s\n", __func__);
+
+	spin_lock_bh(&hif->tx_lock);
+
+	if (test_bit(client_id, &hif->shm->g_client_status[0])) {
+		pr_err("%s: client %d already registered\n",
+		       __func__, client_id);
+		err = -1;
+		goto unlock;
+	}
+
+	memset(client, 0, sizeof(struct hif_client));
+
+	/* Initialize client Rx queues baseaddr, size */
+
+	cnt = CLIENT_CTRL_RX_Q_CNT(client_shm->ctrl);
+	/* Check if client is requesting for more queues than supported */
+	if (cnt > HIF_CLIENT_QUEUES_MAX)
+		cnt = HIF_CLIENT_QUEUES_MAX;
+
+	client->rx_qn = cnt;
+	rx_qbase = (struct rx_queue_desc *)client_shm->rx_qbase;
+	for (i = 0; i < cnt; i++) {
+		rx_queue = &client->rx_q[i];
+		rx_queue->base = rx_qbase + i * client_shm->rx_qsize;
+		rx_queue->size = client_shm->rx_qsize;
+		rx_queue->write_idx = 0;
+	}
+
+	/* Initialize client Tx queues baseaddr, size */
+	cnt = CLIENT_CTRL_TX_Q_CNT(client_shm->ctrl);
+
+	/* Check if client is requesting for more queues than supported */
+	if (cnt > HIF_CLIENT_QUEUES_MAX)
+		cnt = HIF_CLIENT_QUEUES_MAX;
+
+	client->tx_qn = cnt;
+	tx_qbase = (struct tx_queue_desc *)client_shm->tx_qbase;
+	for (i = 0; i < cnt; i++) {
+		tx_queue = &client->tx_q[i];
+		tx_queue->base = tx_qbase + i * client_shm->tx_qsize;
+		tx_queue->size = client_shm->tx_qsize;
+		tx_queue->ack_idx = 0;
+	}
+
+	set_bit(client_id, &hif->shm->g_client_status[0]);
+
+unlock:
+	spin_unlock_bh(&hif->tx_lock);
+
+	return err;
+}
+
+/*
+ * pfe_hif_client_unregister
+ *
+ * This function used to unregister a client  from the HIF driver.
+ *
+ */
+static void pfe_hif_client_unregister(struct pfe_hif *hif, u32 client_id)
+{
+	pr_info("%s\n", __func__);
+
+	/*
+	 * Mark client as no longer available (which prevents further packet
+	 * receive for this client)
+	 */
+	spin_lock_bh(&hif->tx_lock);
+
+	if (!test_bit(client_id, &hif->shm->g_client_status[0])) {
+		pr_err("%s: client %d not registered\n", __func__,
+		       client_id);
+
+		spin_unlock_bh(&hif->tx_lock);
+		return;
+	}
+
+	clear_bit(client_id, &hif->shm->g_client_status[0]);
+
+	spin_unlock_bh(&hif->tx_lock);
+}
+
+/*
+ * client_put_rxpacket-
+ * This functions puts the Rx pkt  in the given client Rx queue.
+ * It actually swap the Rx pkt in the client Rx descriptor buffer
+ * and returns the free buffer from it.
+ *
+ * If the function returns NULL means client Rx queue is full and
+ * packet couldn't send to client queue.
+ */
+static void *client_put_rxpacket(struct hif_rx_queue *queue, void *pkt, u32 len,
+				 u32 flags, u32 client_ctrl, u32 *rem_len)
+{
+	void *free_pkt = NULL;
+	struct rx_queue_desc *desc = queue->base + queue->write_idx;
+
+	if (readl(&desc->ctrl) & CL_DESC_OWN) {
+		if (page_mode) {
+			int rem_page_size = PAGE_SIZE -
+					PRESENT_OFST_IN_PAGE(pkt);
+			int cur_pkt_size = ROUND_MIN_RX_SIZE(len +
+					pfe_pkt_headroom);
+			*rem_len = (rem_page_size - cur_pkt_size);
+			if (*rem_len) {
+				free_pkt = pkt + cur_pkt_size;
+				get_page(virt_to_page(free_pkt));
+			} else {
+				free_pkt = (void
+				*)__get_free_page(GFP_ATOMIC | GFP_DMA_PFE);
+				*rem_len = pfe_pkt_size;
+			}
+		} else {
+			free_pkt = kmalloc(PFE_BUF_SIZE, GFP_ATOMIC |
+					GFP_DMA_PFE);
+			*rem_len = PFE_BUF_SIZE - pfe_pkt_headroom;
+		}
+
+		if (free_pkt) {
+			desc->data = pkt;
+			desc->client_ctrl = client_ctrl;
+			/*
+			 * Ensure everything else is written to DDR before
+			 * writing bd->ctrl
+			 */
+			smp_wmb();
+			writel(CL_DESC_BUF_LEN(len) | flags, &desc->ctrl);
+			queue->write_idx = (queue->write_idx + 1)
+					    & (queue->size - 1);
+
+			free_pkt += pfe_pkt_headroom;
+		}
+	}
+
+	return free_pkt;
+}
+
+/*
+ * pfe_hif_rx_process-
+ * This function does pfe hif rx queue processing.
+ * Dequeue packet from Rx queue and send it to corresponding client queue
+ */
+static int pfe_hif_rx_process(struct pfe_hif *hif, int budget)
+{
+	struct hif_desc	*desc;
+	struct hif_hdr *pkt_hdr;
+	struct __hif_hdr hif_hdr;
+	void *free_buf;
+	int rtc, len, rx_processed = 0;
+	struct __hif_desc local_desc;
+	int flags;
+	unsigned int desc_p;
+	unsigned int buf_size = 0;
+
+	spin_lock_bh(&hif->lock);
+
+	rtc = hif->rxtoclean_index;
+
+	while (rx_processed < budget) {
+		desc = hif->rx_base + rtc;
+
+		__memcpy12(&local_desc, desc);
+
+		/* ACK pending Rx interrupt */
+		if (local_desc.ctrl & BD_CTRL_DESC_EN) {
+			writel(HIF_INT | HIF_RXPKT_INT, HIF_INT_SRC);
+
+			if (rx_processed == 0) {
+				if (napi_first_batch == 1) {
+					desc_p = hif->descr_baseaddr_p +
+					((unsigned long int)(desc) -
+					(unsigned long
+					int)hif->descr_baseaddr_v);
+					napi_first_batch = 0;
+				}
+			}
+
+			__memcpy12(&local_desc, desc);
+
+			if (local_desc.ctrl & BD_CTRL_DESC_EN)
+				break;
+		}
+
+		napi_first_batch = 0;
+
+#ifdef HIF_NAPI_STATS
+		hif->napi_counters[NAPI_DESC_COUNT]++;
+#endif
+		len = BD_BUF_LEN(local_desc.ctrl);
+		/*
+		 * dma_unmap_single(hif->dev, DDR_PFE_TO_PHYS(local_desc.data),
+		 * hif->rx_buf_len[rtc], DMA_FROM_DEVICE);
+		 */
+		dma_unmap_single(hif->dev, DDR_PFE_TO_PHYS(local_desc.data),
+				 hif->rx_buf_len[rtc], DMA_FROM_DEVICE);
+
+		pkt_hdr = (struct hif_hdr *)hif->rx_buf_addr[rtc];
+
+		/* Track last HIF header received */
+		if (!hif->started) {
+			hif->started = 1;
+
+			__memcpy8(&hif_hdr, pkt_hdr);
+
+			hif->qno = hif_hdr.hdr.q_num;
+			hif->client_id = hif_hdr.hdr.client_id;
+			hif->client_ctrl = (hif_hdr.hdr.client_ctrl1 << 16) |
+						hif_hdr.hdr.client_ctrl;
+			flags = CL_DESC_FIRST;
+
+		} else {
+			flags = 0;
+		}
+
+		if (local_desc.ctrl & BD_CTRL_LIFM)
+			flags |= CL_DESC_LAST;
+
+		/* Check for valid client id and still registered */
+		if ((hif->client_id >= HIF_CLIENTS_MAX) ||
+		    !(test_bit(hif->client_id,
+			&hif->shm->g_client_status[0]))) {
+			printk_ratelimited("%s: packet with invalid client id %d q_num %d\n",
+					   __func__,
+					   hif->client_id,
+					   hif->qno);
+
+			free_buf = pkt_hdr;
+
+			goto pkt_drop;
+		}
+
+		/* Check to valid queue number */
+		if (hif->client[hif->client_id].rx_qn <= hif->qno) {
+			pr_info("%s: packet with invalid queue: %d\n"
+				, __func__, hif->qno);
+			hif->qno = 0;
+		}
+
+		free_buf =
+		client_put_rxpacket(&hif->client[hif->client_id].rx_q[hif->qno],
+				    (void *)pkt_hdr, len, flags,
+			hif->client_ctrl, &buf_size);
+
+		hif_lib_indicate_client(hif->client_id, EVENT_RX_PKT_IND,
+					hif->qno);
+
+		if (unlikely(!free_buf)) {
+#ifdef HIF_NAPI_STATS
+			hif->napi_counters[NAPI_CLIENT_FULL_COUNT]++;
+#endif
+			/*
+			 * If we want to keep in polling mode to retry later,
+			 * we need to tell napi that we consumed
+			 * the full budget or we will hit a livelock scenario.
+			 * The core code keeps this napi instance
+			 * at the head of the list and none of the other
+			 * instances get to run
+			 */
+			rx_processed = budget;
+
+			if (flags & CL_DESC_FIRST)
+				hif->started = 0;
+
+			break;
+		}
+
+pkt_drop:
+		/*Fill free buffer in the descriptor */
+		hif->rx_buf_addr[rtc] = free_buf;
+		hif->rx_buf_len[rtc] = min(pfe_pkt_size, buf_size);
+		writel((DDR_PHYS_TO_PFE
+			((u32)dma_map_single(hif->dev,
+			free_buf, hif->rx_buf_len[rtc], DMA_FROM_DEVICE))),
+			&desc->data);
+		/*
+		 * Ensure everything else is written to DDR before
+		 * writing bd->ctrl
+		 */
+		wmb();
+		writel((BD_CTRL_PKT_INT_EN | BD_CTRL_LIFM | BD_CTRL_DIR |
+			BD_CTRL_DESC_EN | BD_BUF_LEN(hif->rx_buf_len[rtc])),
+			&desc->ctrl);
+
+		rtc = (rtc + 1) & (hif->rx_ring_size - 1);
+
+		if (local_desc.ctrl & BD_CTRL_LIFM) {
+			if (!(hif->client_ctrl & HIF_CTRL_RX_CONTINUED)) {
+				rx_processed++;
+
+#ifdef HIF_NAPI_STATS
+				hif->napi_counters[NAPI_PACKET_COUNT]++;
+#endif
+			}
+			hif->started = 0;
+		}
+	}
+
+	hif->rxtoclean_index = rtc;
+	spin_unlock_bh(&hif->lock);
+
+	/* we made some progress, re-start rx dma in case it stopped */
+	hif_rx_dma_start();
+
+	return rx_processed;
+}
+
+/*
+ * client_ack_txpacket-
+ * This function ack the Tx packet in the give client Tx queue by resetting
+ * ownership bit in the descriptor.
+ */
+static int client_ack_txpacket(struct pfe_hif *hif, unsigned int client_id,
+			       unsigned int q_no)
+{
+	struct hif_tx_queue *queue = &hif->client[client_id].tx_q[q_no];
+	struct tx_queue_desc *desc = queue->base + queue->ack_idx;
+
+	if (readl(&desc->ctrl) & CL_DESC_OWN) {
+		writel((readl(&desc->ctrl) & ~CL_DESC_OWN), &desc->ctrl);
+		queue->ack_idx = (queue->ack_idx + 1) & (queue->size - 1);
+
+		return 0;
+
+	} else {
+		/*This should not happen */
+		pr_err("%s: %d %d %d %d %d %p %d\n", __func__,
+		       hif->txtosend, hif->txtoclean, hif->txavail,
+			client_id, q_no, queue, queue->ack_idx);
+		WARN(1, "%s: doesn't own this descriptor", __func__);
+		return 1;
+	}
+}
+
+void __hif_tx_done_process(struct pfe_hif *hif, int count)
+{
+	struct hif_desc *desc;
+	struct hif_desc_sw *desc_sw;
+	int ttc, tx_avl;
+	int pkts_done[HIF_CLIENTS_MAX] = {0, 0};
+
+	ttc = hif->txtoclean;
+	tx_avl = hif->txavail;
+
+	while ((tx_avl < hif->tx_ring_size) && count--) {
+		desc = hif->tx_base + ttc;
+
+		if (readl(&desc->ctrl) & BD_CTRL_DESC_EN)
+			break;
+
+		desc_sw = &hif->tx_sw_queue[ttc];
+
+		if (desc_sw->data) {
+			/*
+			 * dmap_unmap_single(hif->dev, desc_sw->data,
+			 * desc_sw->len, DMA_TO_DEVICE);
+			 */
+			dma_unmap_single(hif->dev, desc_sw->data,
+					 desc_sw->len, DMA_TO_DEVICE);
+		}
+
+		if (desc_sw->client_id >= HIF_CLIENTS_MAX) {
+			pr_err("Invalid cl id %d\n", desc_sw->client_id);
+			break;
+		}
+
+		pkts_done[desc_sw->client_id]++;
+
+		client_ack_txpacket(hif, desc_sw->client_id, desc_sw->q_no);
+
+		ttc = (ttc + 1) & (hif->tx_ring_size - 1);
+		tx_avl++;
+	}
+
+	if (pkts_done[0])
+		hif_lib_indicate_client(0, EVENT_TXDONE_IND, 0);
+	if (pkts_done[1])
+		hif_lib_indicate_client(1, EVENT_TXDONE_IND, 0);
+
+	hif->txtoclean = ttc;
+	hif->txavail = tx_avl;
+
+	if (!count) {
+		tasklet_schedule(&hif->tx_cleanup_tasklet);
+	} else {
+		/*Enable Tx done interrupt */
+		writel(readl_relaxed(HIF_INT_ENABLE) | HIF_TXPKT_INT,
+		       HIF_INT_ENABLE);
+	}
+}
+
+static void pfe_tx_do_cleanup(unsigned long data)
+{
+	struct pfe_hif *hif = (struct pfe_hif *)data;
+
+	writel(HIF_INT | HIF_TXPKT_INT, HIF_INT_SRC);
+
+	hif_tx_done_process(hif, 64);
+}
+
+/*
+ * __hif_xmit_pkt -
+ * This function puts one packet in the HIF Tx queue
+ */
+void __hif_xmit_pkt(struct pfe_hif *hif, unsigned int client_id, unsigned int
+			q_no, void *data, u32 len, unsigned int flags)
+{
+	struct hif_desc	*desc;
+	struct hif_desc_sw *desc_sw;
+
+	desc = hif->tx_base + hif->txtosend;
+	desc_sw = &hif->tx_sw_queue[hif->txtosend];
+
+	desc_sw->len = len;
+	desc_sw->client_id = client_id;
+	desc_sw->q_no = q_no;
+	desc_sw->flags = flags;
+
+	if (flags & HIF_DONT_DMA_MAP) {
+		desc_sw->data = 0;
+		writel((u32)DDR_PHYS_TO_PFE(data), &desc->data);
+	} else {
+		desc_sw->data = dma_map_single(hif->dev, data, len,
+						DMA_TO_DEVICE);
+		writel((u32)DDR_PHYS_TO_PFE(desc_sw->data), &desc->data);
+	}
+
+	hif->txtosend = (hif->txtosend + 1) & (hif->tx_ring_size - 1);
+	hif->txavail--;
+
+	if ((!((flags & HIF_DATA_VALID) && (flags &
+				HIF_LAST_BUFFER))))
+		goto skip_tx;
+
+	/*
+	 * Ensure everything else is written to DDR before
+	 * writing bd->ctrl
+	 */
+	wmb();
+
+	do {
+		desc_sw = &hif->tx_sw_queue[hif->txtoflush];
+		desc = hif->tx_base + hif->txtoflush;
+
+		if (desc_sw->flags & HIF_LAST_BUFFER) {
+			writel((BD_CTRL_LIFM |
+			       BD_CTRL_BRFETCH_DISABLE | BD_CTRL_RTFETCH_DISABLE
+			       | BD_CTRL_PARSE_DISABLE | BD_CTRL_DESC_EN |
+				BD_CTRL_PKT_INT_EN | BD_BUF_LEN(desc_sw->len)),
+				&desc->ctrl);
+		} else {
+			writel((BD_CTRL_DESC_EN |
+				BD_BUF_LEN(desc_sw->len)), &desc->ctrl);
+		}
+		hif->txtoflush = (hif->txtoflush + 1) & (hif->tx_ring_size - 1);
+	}
+	while (hif->txtoflush != hif->txtosend)
+		;
+
+skip_tx:
+	return;
+}
+
+static irqreturn_t wol_isr(int irq, void *dev_id)
+{
+	pr_info("WoL\n");
+	gemac_set_wol(EMAC1_BASE_ADDR, 0);
+	gemac_set_wol(EMAC2_BASE_ADDR, 0);
+	return IRQ_HANDLED;
+}
+
+/*
+ * hif_isr-
+ * This ISR routine processes Rx/Tx done interrupts from the HIF hardware block
+ */
+static irqreturn_t hif_isr(int irq, void *dev_id)
+{
+	struct pfe_hif *hif = (struct pfe_hif *)dev_id;
+	int int_status;
+	int int_enable_mask;
+
+	/*Read hif interrupt source register */
+	int_status = readl_relaxed(HIF_INT_SRC);
+	int_enable_mask = readl_relaxed(HIF_INT_ENABLE);
+
+	if ((int_status & HIF_INT) == 0)
+		return IRQ_NONE;
+
+	int_status &= ~(HIF_INT);
+
+	if (int_status & HIF_RXPKT_INT) {
+		int_status &= ~(HIF_RXPKT_INT);
+		int_enable_mask &= ~(HIF_RXPKT_INT);
+
+		napi_first_batch = 1;
+
+		if (napi_schedule_prep(&hif->napi)) {
+#ifdef HIF_NAPI_STATS
+			hif->napi_counters[NAPI_SCHED_COUNT]++;
+#endif
+			__napi_schedule(&hif->napi);
+		}
+	}
+
+	if (int_status & HIF_TXPKT_INT) {
+		int_status &= ~(HIF_TXPKT_INT);
+		int_enable_mask &= ~(HIF_TXPKT_INT);
+		/*Schedule tx cleanup tassklet */
+		tasklet_schedule(&hif->tx_cleanup_tasklet);
+	}
+
+	/*Disable interrupts, they will be enabled after they are serviced */
+	writel_relaxed(int_enable_mask, HIF_INT_ENABLE);
+
+	if (int_status) {
+		pr_info("%s : Invalid interrupt : %d\n", __func__,
+			int_status);
+		writel(int_status, HIF_INT_SRC);
+	}
+
+	return IRQ_HANDLED;
+}
+
+void hif_process_client_req(struct pfe_hif *hif, int req, int data1, int data2)
+{
+	unsigned int client_id = data1;
+
+	if (client_id >= HIF_CLIENTS_MAX) {
+		pr_err("%s: client id %d out of bounds\n", __func__,
+		       client_id);
+		return;
+	}
+
+	switch (req) {
+	case REQUEST_CL_REGISTER:
+			/* Request for register a client */
+			pr_info("%s: register client_id %d\n",
+				__func__, client_id);
+			pfe_hif_client_register(hif, client_id, (struct
+				hif_client_shm *)&hif->shm->client[client_id]);
+			break;
+
+	case REQUEST_CL_UNREGISTER:
+			pr_info("%s: unregister client_id %d\n",
+				__func__, client_id);
+
+			/* Request for unregister a client */
+			pfe_hif_client_unregister(hif, client_id);
+
+			break;
+
+	default:
+			pr_err("%s: unsupported request %d\n",
+			       __func__, req);
+			break;
+	}
+
+	/*
+	 * Process client Tx queues
+	 * Currently we don't have checking for tx pending
+	 */
+}
+
+/*
+ * pfe_hif_rx_poll
+ *  This function is NAPI poll function to process HIF Rx queue.
+ */
+static int pfe_hif_rx_poll(struct napi_struct *napi, int budget)
+{
+	struct pfe_hif *hif = container_of(napi, struct pfe_hif, napi);
+	int work_done;
+
+#ifdef HIF_NAPI_STATS
+	hif->napi_counters[NAPI_POLL_COUNT]++;
+#endif
+
+	work_done = pfe_hif_rx_process(hif, budget);
+
+	if (work_done < budget) {
+		napi_complete(napi);
+		writel(readl_relaxed(HIF_INT_ENABLE) | HIF_RXPKT_INT,
+		       HIF_INT_ENABLE);
+	}
+#ifdef HIF_NAPI_STATS
+	else
+		hif->napi_counters[NAPI_FULL_BUDGET_COUNT]++;
+#endif
+
+	return work_done;
+}
+
+/*
+ * pfe_hif_init
+ * This function initializes the baseaddresses and irq, etc.
+ */
+int pfe_hif_init(struct pfe *pfe)
+{
+	struct pfe_hif *hif = &pfe->hif;
+	int err;
+
+	pr_info("%s\n", __func__);
+
+	hif->dev = pfe->dev;
+	hif->irq = pfe->hif_irq;
+
+	err = pfe_hif_alloc_descr(hif);
+	if (err)
+		goto err0;
+
+	if (pfe_hif_init_buffers(hif)) {
+		pr_err("%s: Could not initialize buffer descriptors\n"
+			, __func__);
+		err = -ENOMEM;
+		goto err1;
+	}
+
+	/* Initialize NAPI for Rx processing */
+	init_dummy_netdev(&hif->dummy_dev);
+	netif_napi_add(&hif->dummy_dev, &hif->napi, pfe_hif_rx_poll);
+	napi_enable(&hif->napi);
+
+	spin_lock_init(&hif->tx_lock);
+	spin_lock_init(&hif->lock);
+
+	hif_init();
+	hif_rx_enable();
+	hif_tx_enable();
+
+	/* Disable tx done interrupt */
+	writel(HIF_INT_MASK, HIF_INT_ENABLE);
+
+	gpi_enable(HGPI_BASE_ADDR);
+
+	err = request_irq(hif->irq, hif_isr, 0, "pfe_hif", hif);
+	if (err) {
+		pr_err("%s: failed to get the hif IRQ = %d\n",
+		       __func__, hif->irq);
+		goto err1;
+	}
+
+	err = request_irq(pfe->wol_irq, wol_isr, 0, "pfe_wol", pfe);
+	if (err) {
+		pr_err("%s: failed to get the wol IRQ = %d\n",
+		       __func__, pfe->wol_irq);
+		goto err1;
+	}
+
+	tasklet_init(&hif->tx_cleanup_tasklet,
+		     (void(*)(unsigned long))pfe_tx_do_cleanup,
+		     (unsigned long)hif);
+
+	return 0;
+err1:
+	pfe_hif_free_descr(hif);
+err0:
+	return err;
+}
+
+/* pfe_hif_exit- */
+void pfe_hif_exit(struct pfe *pfe)
+{
+	struct pfe_hif *hif = &pfe->hif;
+
+	pr_info("%s\n", __func__);
+
+	tasklet_kill(&hif->tx_cleanup_tasklet);
+
+	spin_lock_bh(&hif->lock);
+	hif->shm->g_client_status[0] = 0;
+	/* Make sure all clients are disabled*/
+	hif->shm->g_client_status[1] = 0;
+
+	spin_unlock_bh(&hif->lock);
+
+	/*Disable Rx/Tx */
+	gpi_disable(HGPI_BASE_ADDR);
+	hif_rx_disable();
+	hif_tx_disable();
+
+	napi_disable(&hif->napi);
+	netif_napi_del(&hif->napi);
+
+	free_irq(pfe->wol_irq, pfe);
+	free_irq(hif->irq, hif);
+
+	pfe_hif_release_buffers(hif);
+	pfe_hif_free_descr(hif);
+}
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_hif.h
@@ -0,0 +1,199 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#ifndef _PFE_HIF_H_
+#define _PFE_HIF_H_
+
+#include <linux/netdevice.h>
+
+#define HIF_NAPI_STATS
+
+#define HIF_CLIENT_QUEUES_MAX	16
+#define HIF_RX_POLL_WEIGHT	64
+
+#define HIF_RX_PKT_MIN_SIZE 0x800 /* 2KB */
+#define HIF_RX_PKT_MIN_SIZE_MASK ~(HIF_RX_PKT_MIN_SIZE - 1)
+#define ROUND_MIN_RX_SIZE(_sz) (((_sz) + (HIF_RX_PKT_MIN_SIZE - 1)) \
+					& HIF_RX_PKT_MIN_SIZE_MASK)
+#define PRESENT_OFST_IN_PAGE(_buf) (((unsigned long int)(_buf) & (PAGE_SIZE \
+					- 1)) & HIF_RX_PKT_MIN_SIZE_MASK)
+
+enum {
+	NAPI_SCHED_COUNT = 0,
+	NAPI_POLL_COUNT,
+	NAPI_PACKET_COUNT,
+	NAPI_DESC_COUNT,
+	NAPI_FULL_BUDGET_COUNT,
+	NAPI_CLIENT_FULL_COUNT,
+	NAPI_MAX_COUNT
+};
+
+/*
+ * HIF_TX_DESC_NT value should be always greter than 4,
+ * Otherwise HIF_TX_POLL_MARK will become zero.
+ */
+#define HIF_RX_DESC_NT		256
+#define HIF_TX_DESC_NT		2048
+
+#define HIF_FIRST_BUFFER	BIT(0)
+#define HIF_LAST_BUFFER		BIT(1)
+#define HIF_DONT_DMA_MAP	BIT(2)
+#define HIF_DATA_VALID		BIT(3)
+#define HIF_TSO			BIT(4)
+
+enum {
+	PFE_CL_GEM0 = 0,
+	PFE_CL_GEM1,
+	HIF_CLIENTS_MAX
+};
+
+/*structure to store client queue info */
+struct hif_rx_queue {
+	struct rx_queue_desc *base;
+	u32	size;
+	u32	write_idx;
+};
+
+struct hif_tx_queue {
+	struct tx_queue_desc *base;
+	u32	size;
+	u32	ack_idx;
+};
+
+/*Structure to store the client info */
+struct hif_client {
+	int	rx_qn;
+	struct hif_rx_queue	rx_q[HIF_CLIENT_QUEUES_MAX];
+	int	tx_qn;
+	struct hif_tx_queue	tx_q[HIF_CLIENT_QUEUES_MAX];
+};
+
+/*HIF hardware buffer descriptor */
+struct hif_desc {
+	u32 ctrl;
+	u32 status;
+	u32 data;
+	u32 next;
+};
+
+struct __hif_desc {
+	u32 ctrl;
+	u32 status;
+	u32 data;
+};
+
+struct hif_desc_sw {
+	dma_addr_t data;
+	u16 len;
+	u8 client_id;
+	u8 q_no;
+	u16 flags;
+};
+
+struct hif_hdr {
+	u8 client_id;
+	u8 q_num;
+	u16 client_ctrl;
+	u16 client_ctrl1;
+};
+
+struct __hif_hdr {
+	union {
+		struct hif_hdr hdr;
+		u32 word[2];
+	};
+};
+
+struct hif_ipsec_hdr {
+	u16	sa_handle[2];
+} __packed;
+
+/*  HIF_CTRL_TX... defines */
+#define HIF_CTRL_TX_CHECKSUM		BIT(2)
+
+/*  HIF_CTRL_RX... defines */
+#define HIF_CTRL_RX_OFFSET_OFST         (24)
+#define HIF_CTRL_RX_CHECKSUMMED		BIT(2)
+#define HIF_CTRL_RX_CONTINUED		BIT(1)
+
+struct pfe_hif {
+	/* To store registered clients in hif layer */
+	struct hif_client client[HIF_CLIENTS_MAX];
+	struct hif_shm *shm;
+	int	irq;
+
+	void	*descr_baseaddr_v;
+	unsigned long	descr_baseaddr_p;
+
+	struct hif_desc *rx_base;
+	u32	rx_ring_size;
+	u32	rxtoclean_index;
+	void	*rx_buf_addr[HIF_RX_DESC_NT];
+	int	rx_buf_len[HIF_RX_DESC_NT];
+	unsigned int qno;
+	unsigned int client_id;
+	unsigned int client_ctrl;
+	unsigned int started;
+
+	struct hif_desc *tx_base;
+	u32	tx_ring_size;
+	u32	txtosend;
+	u32	txtoclean;
+	u32	txavail;
+	u32	txtoflush;
+	struct hif_desc_sw tx_sw_queue[HIF_TX_DESC_NT];
+
+/* tx_lock synchronizes hif packet tx as well as pfe_hif structure access */
+	spinlock_t tx_lock;
+/* lock synchronizes hif rx queue processing */
+	spinlock_t lock;
+	struct net_device	dummy_dev;
+	struct napi_struct	napi;
+	struct device *dev;
+
+#ifdef HIF_NAPI_STATS
+	unsigned int napi_counters[NAPI_MAX_COUNT];
+#endif
+	struct tasklet_struct	tx_cleanup_tasklet;
+};
+
+void __hif_xmit_pkt(struct pfe_hif *hif, unsigned int client_id, unsigned int
+			q_no, void *data, u32 len, unsigned int flags);
+int hif_xmit_pkt(struct pfe_hif *hif, unsigned int client_id, unsigned int q_no,
+		 void *data, unsigned int len);
+void __hif_tx_done_process(struct pfe_hif *hif, int count);
+void hif_process_client_req(struct pfe_hif *hif, int req, int data1, int
+				data2);
+int pfe_hif_init(struct pfe *pfe);
+void pfe_hif_exit(struct pfe *pfe);
+void pfe_hif_rx_idle(struct pfe_hif *hif);
+static inline void hif_tx_done_process(struct pfe_hif *hif, int count)
+{
+	spin_lock_bh(&hif->tx_lock);
+	__hif_tx_done_process(hif, count);
+	spin_unlock_bh(&hif->tx_lock);
+}
+
+static inline void hif_tx_lock(struct pfe_hif *hif)
+{
+	spin_lock_bh(&hif->tx_lock);
+}
+
+static inline void hif_tx_unlock(struct pfe_hif *hif)
+{
+	spin_unlock_bh(&hif->tx_lock);
+}
+
+static inline int __hif_tx_avail(struct pfe_hif *hif)
+{
+	return hif->txavail;
+}
+
+#define __memcpy8(dst, src)		memcpy(dst, src, 8)
+#define __memcpy12(dst, src)		memcpy(dst, src, 12)
+#define __memcpy(dst, src, len)		memcpy(dst, src, len)
+
+#endif /* _PFE_HIF_H_ */
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.c
@@ -0,0 +1,628 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/moduleparam.h>
+#include <linux/cpu.h>
+
+#include "pfe_mod.h"
+#include "pfe_hif.h"
+#include "pfe_hif_lib.h"
+
+unsigned int lro_mode;
+unsigned int page_mode;
+unsigned int tx_qos = 1;
+module_param(tx_qos, uint, 0444);
+MODULE_PARM_DESC(tx_qos, "0: disable ,\n"
+			 "1: enable (default), guarantee no packet drop at TMU level\n");
+unsigned int pfe_pkt_size;
+unsigned int pfe_pkt_headroom;
+unsigned int emac_txq_cnt;
+
+/*
+ * @pfe_hal_lib.c.
+ * Common functions used by HIF client drivers
+ */
+
+/*HIF shared memory Global variable */
+struct hif_shm ghif_shm;
+
+/* Cleanup the HIF shared memory, release HIF rx_buffer_pool.
+ * This function should be called after pfe_hif_exit
+ *
+ * @param[in] hif_shm		Shared memory address location in DDR
+ */
+static void pfe_hif_shm_clean(struct hif_shm *hif_shm)
+{
+	int i;
+	void *pkt;
+
+	for (i = 0; i < hif_shm->rx_buf_pool_cnt; i++) {
+		pkt = hif_shm->rx_buf_pool[i];
+		if (pkt) {
+			hif_shm->rx_buf_pool[i] = NULL;
+			pkt -= pfe_pkt_headroom;
+
+			if (page_mode)
+				put_page(virt_to_page(pkt));
+			else
+				kfree(pkt);
+		}
+	}
+}
+
+/* Initialize shared memory used between HIF driver and clients,
+ * allocate rx_buffer_pool required for HIF Rx descriptors.
+ * This function should be called before initializing HIF driver.
+ *
+ * @param[in] hif_shm		Shared memory address location in DDR
+ * @rerurn			0 - on succes, <0 on fail to initialize
+ */
+static int pfe_hif_shm_init(struct hif_shm *hif_shm)
+{
+	int i;
+	void *pkt;
+
+	memset(hif_shm, 0, sizeof(struct hif_shm));
+	hif_shm->rx_buf_pool_cnt = HIF_RX_DESC_NT;
+
+	for (i = 0; i < hif_shm->rx_buf_pool_cnt; i++) {
+		if (page_mode) {
+			pkt = (void *)__get_free_page(GFP_KERNEL |
+				GFP_DMA_PFE);
+		} else {
+			pkt = kmalloc(PFE_BUF_SIZE, GFP_KERNEL | GFP_DMA_PFE);
+		}
+
+		if (pkt)
+			hif_shm->rx_buf_pool[i] = pkt + pfe_pkt_headroom;
+		else
+			goto err0;
+	}
+
+	return 0;
+
+err0:
+	pr_err("%s Low memory\n", __func__);
+	pfe_hif_shm_clean(hif_shm);
+	return -ENOMEM;
+}
+
+/*This function sends indication to HIF driver
+ *
+ * @param[in] hif	hif context
+ */
+static void hif_lib_indicate_hif(struct pfe_hif *hif, int req, int data1, int
+					data2)
+{
+	hif_process_client_req(hif, req, data1, data2);
+}
+
+void hif_lib_indicate_client(int client_id, int event_type, int qno)
+{
+	struct hif_client_s *client = pfe->hif_client[client_id];
+
+	if (!client || (event_type >= HIF_EVENT_MAX) || (qno >=
+		HIF_CLIENT_QUEUES_MAX))
+		return;
+
+	if (!test_and_set_bit(qno, &client->queue_mask[event_type]))
+		client->event_handler(client->priv, event_type, qno);
+}
+
+/*This function releases Rx queue descriptors memory and pre-filled buffers
+ *
+ * @param[in] client	hif_client context
+ */
+static void hif_lib_client_release_rx_buffers(struct hif_client_s *client)
+{
+	struct rx_queue_desc *desc;
+	int qno, ii;
+	void *buf;
+
+	for (qno = 0; qno < client->rx_qn; qno++) {
+		desc = client->rx_q[qno].base;
+
+		for (ii = 0; ii < client->rx_q[qno].size; ii++) {
+			buf = (void *)desc->data;
+			if (buf) {
+				buf -= pfe_pkt_headroom;
+
+				if (page_mode)
+					free_page((unsigned long)buf);
+				else
+					kfree(buf);
+
+				desc->ctrl = 0;
+			}
+
+			desc++;
+		}
+	}
+
+	kfree(client->rx_qbase);
+}
+
+/*This function allocates memory for the rxq descriptors and pre-fill rx queues
+ * with buffers.
+ * @param[in] client	client context
+ * @param[in] q_size	size of the rxQ, all queues are of same size
+ */
+static int hif_lib_client_init_rx_buffers(struct hif_client_s *client, int
+						q_size)
+{
+	struct rx_queue_desc *desc;
+	struct hif_client_rx_queue *queue;
+	int ii, qno;
+
+	/*Allocate memory for the client queues */
+	client->rx_qbase = kzalloc(client->rx_qn * q_size * sizeof(struct
+				rx_queue_desc), GFP_KERNEL);
+	if (!client->rx_qbase)
+		goto err;
+
+	for (qno = 0; qno < client->rx_qn; qno++) {
+		queue = &client->rx_q[qno];
+
+		queue->base = client->rx_qbase + qno * q_size * sizeof(struct
+				rx_queue_desc);
+		queue->size = q_size;
+		queue->read_idx = 0;
+		queue->write_idx = 0;
+
+		pr_debug("rx queue: %d, base: %p, size: %d\n", qno,
+			 queue->base, queue->size);
+	}
+
+	for (qno = 0; qno < client->rx_qn; qno++) {
+		queue = &client->rx_q[qno];
+		desc = queue->base;
+
+		for (ii = 0; ii < queue->size; ii++) {
+			desc->ctrl = CL_DESC_BUF_LEN(pfe_pkt_size) |
+					CL_DESC_OWN;
+			desc++;
+		}
+	}
+
+	return 0;
+
+err:
+	return 1;
+}
+
+
+static void hif_lib_client_cleanup_tx_queue(struct hif_client_tx_queue *queue)
+{
+	pr_debug("%s\n", __func__);
+
+	/*
+	 * Check if there are any pending packets. Client must flush the tx
+	 * queues before unregistering, by calling by calling
+	 * hif_lib_tx_get_next_complete()
+	 *
+	 * Hif no longer calls since we are no longer registered
+	 */
+	if (queue->tx_pending)
+		pr_err("%s: pending transmit packets\n", __func__);
+}
+
+static void hif_lib_client_release_tx_buffers(struct hif_client_s *client)
+{
+	int qno;
+
+	pr_debug("%s\n", __func__);
+
+	for (qno = 0; qno < client->tx_qn; qno++)
+		hif_lib_client_cleanup_tx_queue(&client->tx_q[qno]);
+
+	kfree(client->tx_qbase);
+}
+
+static int hif_lib_client_init_tx_buffers(struct hif_client_s *client, int
+						q_size)
+{
+	struct hif_client_tx_queue *queue;
+	int qno;
+
+	client->tx_qbase = kzalloc(client->tx_qn * q_size * sizeof(struct
+					tx_queue_desc), GFP_KERNEL);
+	if (!client->tx_qbase)
+		return 1;
+
+	for (qno = 0; qno < client->tx_qn; qno++) {
+		queue = &client->tx_q[qno];
+
+		queue->base = client->tx_qbase + qno * q_size * sizeof(struct
+				tx_queue_desc);
+		queue->size = q_size;
+		queue->read_idx = 0;
+		queue->write_idx = 0;
+		queue->tx_pending = 0;
+		queue->nocpy_flag = 0;
+		queue->prev_tmu_tx_pkts = 0;
+		queue->done_tmu_tx_pkts = 0;
+
+		pr_debug("tx queue: %d, base: %p, size: %d\n", qno,
+			 queue->base, queue->size);
+	}
+
+	return 0;
+}
+
+static int hif_lib_event_dummy(void *priv, int event_type, int qno)
+{
+	return 0;
+}
+
+int hif_lib_client_register(struct hif_client_s *client)
+{
+	struct hif_shm *hif_shm;
+	struct hif_client_shm *client_shm;
+	int err, i;
+	/* int loop_cnt = 0; */
+
+	pr_debug("%s\n", __func__);
+
+	/*Allocate memory before spin_lock*/
+	if (hif_lib_client_init_rx_buffers(client, client->rx_qsize)) {
+		err = -ENOMEM;
+		goto err_rx;
+	}
+
+	if (hif_lib_client_init_tx_buffers(client, client->tx_qsize)) {
+		err = -ENOMEM;
+		goto err_tx;
+	}
+
+	spin_lock_bh(&pfe->hif.lock);
+	if (!(client->pfe) || (client->id >= HIF_CLIENTS_MAX) ||
+	    (pfe->hif_client[client->id])) {
+		err = -EINVAL;
+		goto err;
+	}
+
+	hif_shm = client->pfe->hif.shm;
+
+	if (!client->event_handler)
+		client->event_handler = hif_lib_event_dummy;
+
+	/*Initialize client specific shared memory */
+	client_shm = (struct hif_client_shm *)&hif_shm->client[client->id];
+	client_shm->rx_qbase = (unsigned long int)client->rx_qbase;
+	client_shm->rx_qsize = client->rx_qsize;
+	client_shm->tx_qbase = (unsigned long int)client->tx_qbase;
+	client_shm->tx_qsize = client->tx_qsize;
+	client_shm->ctrl = (client->tx_qn << CLIENT_CTRL_TX_Q_CNT_OFST) |
+				(client->rx_qn << CLIENT_CTRL_RX_Q_CNT_OFST);
+	/* spin_lock_init(&client->rx_lock); */
+
+	for (i = 0; i < HIF_EVENT_MAX; i++) {
+		client->queue_mask[i] = 0;  /*
+					     * By default all events are
+					     * unmasked
+					     */
+	}
+
+	/*Indicate to HIF driver*/
+	hif_lib_indicate_hif(&pfe->hif, REQUEST_CL_REGISTER, client->id, 0);
+
+	pr_debug("%s: client: %p, client_id: %d, tx_qsize: %d, rx_qsize: %d\n",
+		 __func__, client, client->id, client->tx_qsize,
+		 client->rx_qsize);
+
+	client->cpu_id = -1;
+
+	pfe->hif_client[client->id] = client;
+	spin_unlock_bh(&pfe->hif.lock);
+
+	return 0;
+
+err:
+	spin_unlock_bh(&pfe->hif.lock);
+	hif_lib_client_release_tx_buffers(client);
+
+err_tx:
+	hif_lib_client_release_rx_buffers(client);
+
+err_rx:
+	return err;
+}
+
+int hif_lib_client_unregister(struct hif_client_s *client)
+{
+	struct pfe *pfe = client->pfe;
+	u32 client_id = client->id;
+
+	pr_info(
+		"%s : client: %p, client_id: %d, txQ_depth: %d, rxQ_depth: %d\n"
+		, __func__, client, client->id, client->tx_qsize,
+		client->rx_qsize);
+
+	spin_lock_bh(&pfe->hif.lock);
+	hif_lib_indicate_hif(&pfe->hif, REQUEST_CL_UNREGISTER, client->id, 0);
+
+	hif_lib_client_release_tx_buffers(client);
+	hif_lib_client_release_rx_buffers(client);
+	pfe->hif_client[client_id] = NULL;
+	spin_unlock_bh(&pfe->hif.lock);
+
+	return 0;
+}
+
+int hif_lib_event_handler_start(struct hif_client_s *client, int event,
+				int qno)
+{
+	struct hif_client_rx_queue *queue = &client->rx_q[qno];
+	struct rx_queue_desc *desc = queue->base + queue->read_idx;
+
+	if ((event >= HIF_EVENT_MAX) || (qno >= HIF_CLIENT_QUEUES_MAX)) {
+		pr_debug("%s: Unsupported event : %d  queue number : %d\n",
+			 __func__, event, qno);
+		return -1;
+	}
+
+	test_and_clear_bit(qno, &client->queue_mask[event]);
+
+	switch (event) {
+	case EVENT_RX_PKT_IND:
+		if (!(desc->ctrl & CL_DESC_OWN))
+			hif_lib_indicate_client(client->id,
+						EVENT_RX_PKT_IND, qno);
+		break;
+
+	case EVENT_HIGH_RX_WM:
+	case EVENT_TXDONE_IND:
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+/*
+ * This function gets one packet from the specified client queue
+ * It also refill the rx buffer
+ */
+void *hif_lib_receive_pkt(struct hif_client_s *client, int qno, int *len, int
+				*ofst, unsigned int *rx_ctrl,
+				unsigned int *desc_ctrl, void **priv_data)
+{
+	struct hif_client_rx_queue *queue = &client->rx_q[qno];
+	struct rx_queue_desc *desc;
+	void *pkt = NULL;
+
+	/*
+	 * Following lock is to protect rx queue access from,
+	 * hif_lib_event_handler_start.
+	 * In general below lock is not required, because hif_lib_xmit_pkt and
+	 * hif_lib_event_handler_start are called from napi poll and which is
+	 * not re-entrant. But if some client use in different way this lock is
+	 * required.
+	 */
+	/*spin_lock_irqsave(&client->rx_lock, flags); */
+	desc = queue->base + queue->read_idx;
+	if (!(desc->ctrl & CL_DESC_OWN)) {
+		pkt = desc->data - pfe_pkt_headroom;
+
+		*rx_ctrl = desc->client_ctrl;
+		*desc_ctrl = desc->ctrl;
+
+		if (desc->ctrl & CL_DESC_FIRST) {
+			u16 size = *rx_ctrl >> HIF_CTRL_RX_OFFSET_OFST;
+
+			if (size) {
+				size += PFE_PARSE_INFO_SIZE;
+				*len = CL_DESC_BUF_LEN(desc->ctrl) -
+						PFE_PKT_HEADER_SZ - size;
+				*ofst = pfe_pkt_headroom + PFE_PKT_HEADER_SZ
+								+ size;
+				*priv_data = desc->data + PFE_PKT_HEADER_SZ;
+			} else {
+				*len = CL_DESC_BUF_LEN(desc->ctrl) -
+				       PFE_PKT_HEADER_SZ - PFE_PARSE_INFO_SIZE;
+				*ofst = pfe_pkt_headroom
+					+ PFE_PKT_HEADER_SZ
+					+ PFE_PARSE_INFO_SIZE;
+				*priv_data = NULL;
+			}
+
+		} else {
+			*len = CL_DESC_BUF_LEN(desc->ctrl);
+			*ofst = pfe_pkt_headroom;
+		}
+
+		/*
+		 * Needed so we don't free a buffer/page
+		 * twice on module_exit
+		 */
+		desc->data = NULL;
+
+		/*
+		 * Ensure everything else is written to DDR before
+		 * writing bd->ctrl
+		 */
+		smp_wmb();
+
+		desc->ctrl = CL_DESC_BUF_LEN(pfe_pkt_size) | CL_DESC_OWN;
+		queue->read_idx = (queue->read_idx + 1) & (queue->size - 1);
+	}
+
+	/*spin_unlock_irqrestore(&client->rx_lock, flags); */
+	return pkt;
+}
+
+static inline void hif_hdr_write(struct hif_hdr *pkt_hdr, unsigned int
+					client_id, unsigned int qno,
+					u32 client_ctrl)
+{
+	/* Optimize the write since the destinaton may be non-cacheable */
+	if (!((unsigned long)pkt_hdr & 0x3)) {
+		((u32 *)pkt_hdr)[0] = (client_ctrl << 16) | (qno << 8) |
+					client_id;
+	} else {
+		((u16 *)pkt_hdr)[0] = (qno << 8) | (client_id & 0xFF);
+		((u16 *)pkt_hdr)[1] = (client_ctrl & 0xFFFF);
+	}
+}
+
+/*This function puts the given packet in the specific client queue */
+void __hif_lib_xmit_pkt(struct hif_client_s *client, unsigned int qno, void
+				*data, unsigned int len, u32 client_ctrl,
+				unsigned int flags, void *client_data)
+{
+	struct hif_client_tx_queue *queue = &client->tx_q[qno];
+	struct tx_queue_desc *desc = queue->base + queue->write_idx;
+
+	/* First buffer */
+	if (flags & HIF_FIRST_BUFFER) {
+		data -= sizeof(struct hif_hdr);
+		len += sizeof(struct hif_hdr);
+
+		hif_hdr_write(data, client->id, qno, client_ctrl);
+	}
+
+	desc->data = client_data;
+	desc->ctrl = CL_DESC_OWN | CL_DESC_FLAGS(flags);
+
+	__hif_xmit_pkt(&pfe->hif, client->id, qno, data, len, flags);
+
+	queue->write_idx = (queue->write_idx + 1) & (queue->size - 1);
+	queue->tx_pending++;
+	queue->jiffies_last_packet = jiffies;
+}
+
+void *hif_lib_tx_get_next_complete(struct hif_client_s *client, int qno,
+				   unsigned int *flags, int count)
+{
+	struct hif_client_tx_queue *queue = &client->tx_q[qno];
+	struct tx_queue_desc *desc = queue->base + queue->read_idx;
+
+	pr_debug("%s: qno : %d rd_indx: %d pending:%d\n", __func__, qno,
+		 queue->read_idx, queue->tx_pending);
+
+	if (!queue->tx_pending)
+		return NULL;
+
+	if (queue->nocpy_flag && !queue->done_tmu_tx_pkts) {
+		u32 tmu_tx_pkts = be32_to_cpu(pe_dmem_read(TMU0_ID +
+			client->id, TMU_DM_TX_TRANS, 4));
+
+		if (queue->prev_tmu_tx_pkts > tmu_tx_pkts)
+			queue->done_tmu_tx_pkts = UINT_MAX -
+				queue->prev_tmu_tx_pkts + tmu_tx_pkts;
+		else
+			queue->done_tmu_tx_pkts = tmu_tx_pkts -
+						queue->prev_tmu_tx_pkts;
+
+		queue->prev_tmu_tx_pkts  = tmu_tx_pkts;
+
+		if (!queue->done_tmu_tx_pkts)
+			return NULL;
+	}
+
+	if (desc->ctrl & CL_DESC_OWN)
+		return NULL;
+
+	queue->read_idx = (queue->read_idx + 1) & (queue->size - 1);
+	queue->tx_pending--;
+
+	*flags = CL_DESC_GET_FLAGS(desc->ctrl);
+
+	if (queue->done_tmu_tx_pkts && (*flags & HIF_LAST_BUFFER))
+		queue->done_tmu_tx_pkts--;
+
+	return desc->data;
+}
+
+static void hif_lib_tmu_credit_init(struct pfe *pfe)
+{
+	int i, q;
+
+	for (i = 0; i < NUM_GEMAC_SUPPORT; i++)
+		for (q = 0; q < emac_txq_cnt; q++) {
+			pfe->tmu_credit.tx_credit_max[i][q] = (q == 0) ?
+					DEFAULT_Q0_QDEPTH : DEFAULT_MAX_QDEPTH;
+			pfe->tmu_credit.tx_credit[i][q] =
+					pfe->tmu_credit.tx_credit_max[i][q];
+		}
+}
+
+/* __hif_lib_update_credit
+ *
+ * @param[in] client	hif client context
+ * @param[in] queue	queue number in match with TMU
+ */
+void __hif_lib_update_credit(struct hif_client_s *client, unsigned int queue)
+{
+	unsigned int tmu_tx_packets, tmp;
+
+	if (tx_qos) {
+		tmu_tx_packets = be32_to_cpu(pe_dmem_read(TMU0_ID +
+			client->id, (TMU_DM_TX_TRANS + (queue * 4)), 4));
+
+		/* tx_packets counter overflowed */
+		if (tmu_tx_packets >
+		    pfe->tmu_credit.tx_packets[client->id][queue]) {
+			tmp = UINT_MAX - tmu_tx_packets +
+			pfe->tmu_credit.tx_packets[client->id][queue];
+
+			pfe->tmu_credit.tx_credit[client->id][queue] =
+			pfe->tmu_credit.tx_credit_max[client->id][queue] - tmp;
+		} else {
+		/* TMU tx <= pfe_eth tx, normal case or both OF since
+		 * last time
+		 */
+			pfe->tmu_credit.tx_credit[client->id][queue] =
+			pfe->tmu_credit.tx_credit_max[client->id][queue] -
+			(pfe->tmu_credit.tx_packets[client->id][queue] -
+			tmu_tx_packets);
+		}
+	}
+}
+
+int pfe_hif_lib_init(struct pfe *pfe)
+{
+	int rc;
+
+	pr_info("%s\n", __func__);
+
+	if (lro_mode) {
+		page_mode = 1;
+		pfe_pkt_size = min(PAGE_SIZE, MAX_PFE_PKT_SIZE);
+		pfe_pkt_headroom = 0;
+	} else {
+		page_mode = 0;
+		pfe_pkt_size = PFE_PKT_SIZE;
+		pfe_pkt_headroom = PFE_PKT_HEADROOM;
+	}
+
+	if (tx_qos)
+		emac_txq_cnt = EMAC_TXQ_CNT / 2;
+	else
+		emac_txq_cnt = EMAC_TXQ_CNT;
+
+	hif_lib_tmu_credit_init(pfe);
+	pfe->hif.shm = &ghif_shm;
+	rc = pfe_hif_shm_init(pfe->hif.shm);
+
+	return rc;
+}
+
+void pfe_hif_lib_exit(struct pfe *pfe)
+{
+	pr_info("%s\n", __func__);
+
+	pfe_hif_shm_clean(pfe->hif.shm);
+}
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.h
@@ -0,0 +1,229 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#ifndef _PFE_HIF_LIB_H_
+#define _PFE_HIF_LIB_H_
+
+#include "pfe_hif.h"
+
+#define HIF_CL_REQ_TIMEOUT	10
+#define GFP_DMA_PFE 0
+#define PFE_PARSE_INFO_SIZE	16
+
+enum {
+	REQUEST_CL_REGISTER = 0,
+	REQUEST_CL_UNREGISTER,
+	HIF_REQUEST_MAX
+};
+
+enum {
+	/* Event to indicate that client rx queue is reached water mark level */
+	EVENT_HIGH_RX_WM = 0,
+	/* Event to indicate that, packet received for client */
+	EVENT_RX_PKT_IND,
+	/* Event to indicate that, packet tx done for client */
+	EVENT_TXDONE_IND,
+	HIF_EVENT_MAX
+};
+
+/*structure to store client queue info */
+
+/*structure to store client queue info */
+struct hif_client_rx_queue {
+	struct rx_queue_desc *base;
+	u32	size;
+	u32	read_idx;
+	u32	write_idx;
+};
+
+struct hif_client_tx_queue {
+	struct tx_queue_desc *base;
+	u32	size;
+	u32	read_idx;
+	u32	write_idx;
+	u32	tx_pending;
+	unsigned long jiffies_last_packet;
+	u32	nocpy_flag;
+	u32	prev_tmu_tx_pkts;
+	u32	done_tmu_tx_pkts;
+};
+
+struct hif_client_s {
+	int	id;
+	int	tx_qn;
+	int	rx_qn;
+	void	*rx_qbase;
+	void	*tx_qbase;
+	int	tx_qsize;
+	int	rx_qsize;
+	int	cpu_id;
+	struct hif_client_tx_queue tx_q[HIF_CLIENT_QUEUES_MAX];
+	struct hif_client_rx_queue rx_q[HIF_CLIENT_QUEUES_MAX];
+	int (*event_handler)(void *priv, int event, int data);
+	unsigned long queue_mask[HIF_EVENT_MAX];
+	struct pfe *pfe;
+	void *priv;
+};
+
+/*
+ * Client specific shared memory
+ * It contains number of Rx/Tx queues, base addresses and queue sizes
+ */
+struct hif_client_shm {
+	u32 ctrl; /*0-7: number of Rx queues, 8-15: number of tx queues */
+	unsigned long rx_qbase; /*Rx queue base address */
+	u32 rx_qsize; /*each Rx queue size, all Rx queues are of same size */
+	unsigned long tx_qbase; /* Tx queue base address */
+	u32 tx_qsize; /*each Tx queue size, all Tx queues are of same size */
+};
+
+/*Client shared memory ctrl bit description */
+#define CLIENT_CTRL_RX_Q_CNT_OFST	0
+#define CLIENT_CTRL_TX_Q_CNT_OFST	8
+#define CLIENT_CTRL_RX_Q_CNT(ctrl)	(((ctrl) >> CLIENT_CTRL_RX_Q_CNT_OFST) \
+						& 0xFF)
+#define CLIENT_CTRL_TX_Q_CNT(ctrl)	(((ctrl) >> CLIENT_CTRL_TX_Q_CNT_OFST) \
+						& 0xFF)
+
+/*
+ * Shared memory used to communicate between HIF driver and host/client drivers
+ * Before starting the hif driver rx_buf_pool ans rx_buf_pool_cnt should be
+ * initialized with host buffers and buffers count in the pool.
+ * rx_buf_pool_cnt should be >= HIF_RX_DESC_NT.
+ *
+ */
+struct hif_shm {
+	u32 rx_buf_pool_cnt; /*Number of rx buffers available*/
+	/*Rx buffers required to initialize HIF rx descriptors */
+	void *rx_buf_pool[HIF_RX_DESC_NT];
+	unsigned long g_client_status[2]; /*Global client status bit mask */
+	/* Client specific shared memory */
+	struct hif_client_shm client[HIF_CLIENTS_MAX];
+};
+
+#define CL_DESC_OWN	BIT(31)
+/* This sets owner ship to HIF driver */
+#define CL_DESC_LAST	BIT(30)
+/* This indicates last packet for multi buffers handling */
+#define CL_DESC_FIRST	BIT(29)
+/* This indicates first packet for multi buffers handling */
+
+#define CL_DESC_BUF_LEN(x)		((x) & 0xFFFF)
+#define CL_DESC_FLAGS(x)		(((x) & 0xF) << 16)
+#define CL_DESC_GET_FLAGS(x)		(((x) >> 16) & 0xF)
+
+struct rx_queue_desc {
+	void *data;
+	u32	ctrl; /*0-15bit len, 16-20bit flags, 31bit owner*/
+	u32	client_ctrl;
+};
+
+struct tx_queue_desc {
+	void *data;
+	u32	ctrl; /*0-15bit len, 16-20bit flags, 31bit owner*/
+};
+
+/* HIF Rx is not working properly for 2-byte aligned buffers and
+ * ip_header should be 4byte aligned for better iperformance.
+ * "ip_header = 64 + 6(hif_header) + 14 (MAC Header)" will be 4byte aligned.
+ */
+#define PFE_PKT_HEADER_SZ	sizeof(struct hif_hdr)
+/* must be big enough for headroom, pkt size and skb shared info */
+#define PFE_BUF_SIZE		2048
+#define PFE_PKT_HEADROOM	128
+
+#define SKB_SHARED_INFO_SIZE   SKB_DATA_ALIGN(sizeof(struct skb_shared_info))
+#define PFE_PKT_SIZE		(PFE_BUF_SIZE - PFE_PKT_HEADROOM \
+				 - SKB_SHARED_INFO_SIZE)
+#define MAX_L2_HDR_SIZE		14	/* Not correct for VLAN/PPPoE */
+#define MAX_L3_HDR_SIZE		20	/* Not correct for IPv6 */
+#define MAX_L4_HDR_SIZE		60	/* TCP with maximum options */
+#define MAX_HDR_SIZE		(MAX_L2_HDR_SIZE + MAX_L3_HDR_SIZE \
+				 + MAX_L4_HDR_SIZE)
+/* Used in page mode to clamp packet size to the maximum supported by the hif
+ *hw interface (<16KiB)
+ */
+#define MAX_PFE_PKT_SIZE	16380UL
+
+extern unsigned int pfe_pkt_size;
+extern unsigned int pfe_pkt_headroom;
+extern unsigned int page_mode;
+extern unsigned int lro_mode;
+extern unsigned int tx_qos;
+extern unsigned int emac_txq_cnt;
+
+int pfe_hif_lib_init(struct pfe *pfe);
+void pfe_hif_lib_exit(struct pfe *pfe);
+int hif_lib_client_register(struct hif_client_s *client);
+int hif_lib_client_unregister(struct  hif_client_s *client);
+void __hif_lib_xmit_pkt(struct hif_client_s *client, unsigned int qno, void
+				*data, unsigned int len, u32 client_ctrl,
+				unsigned int flags, void *client_data);
+int hif_lib_xmit_pkt(struct hif_client_s *client, unsigned int qno, void *data,
+		     unsigned int len, u32 client_ctrl, void *client_data);
+void hif_lib_indicate_client(int cl_id, int event, int data);
+int hif_lib_event_handler_start(struct hif_client_s *client, int event, int
+					data);
+int hif_lib_tmu_queue_start(struct hif_client_s *client, int qno);
+int hif_lib_tmu_queue_stop(struct hif_client_s *client, int qno);
+void *hif_lib_tx_get_next_complete(struct hif_client_s *client, int qno,
+				   unsigned int *flags, int count);
+void *hif_lib_receive_pkt(struct hif_client_s *client, int qno, int *len, int
+				*ofst, unsigned int *rx_ctrl,
+				unsigned int *desc_ctrl, void **priv_data);
+void __hif_lib_update_credit(struct hif_client_s *client, unsigned int queue);
+void hif_lib_set_rx_cpu_affinity(struct hif_client_s *client, int cpu_id);
+void hif_lib_set_tx_queue_nocpy(struct hif_client_s *client, int qno, int
+					enable);
+static inline int hif_lib_tx_avail(struct hif_client_s *client, unsigned int
+					qno)
+{
+	struct hif_client_tx_queue *queue = &client->tx_q[qno];
+
+	return (queue->size - queue->tx_pending);
+}
+
+static inline int hif_lib_get_tx_wr_index(struct hif_client_s *client, unsigned
+						int qno)
+{
+	struct hif_client_tx_queue *queue = &client->tx_q[qno];
+
+	return queue->write_idx;
+}
+
+static inline int hif_lib_tx_pending(struct hif_client_s *client, unsigned int
+					qno)
+{
+	struct hif_client_tx_queue *queue = &client->tx_q[qno];
+
+	return queue->tx_pending;
+}
+
+#define hif_lib_tx_credit_avail(pfe, id, qno) \
+				((pfe)->tmu_credit.tx_credit[id][qno])
+
+#define hif_lib_tx_credit_max(pfe, id, qno) \
+				((pfe)->tmu_credit.tx_credit_max[id][qno])
+
+/*
+ * Test comment
+ */
+#define hif_lib_tx_credit_use(pfe, id, qno, credit)			\
+	({ typeof(pfe) pfe_ = pfe;					\
+		typeof(id) id_ = id;					\
+		typeof(qno) qno_ = qno;					\
+		typeof(credit) credit_ = credit;			\
+		do {							\
+			if (tx_qos) {					\
+				(pfe_)->tmu_credit.tx_credit[id_][qno_]\
+					 -= credit_;			\
+				(pfe_)->tmu_credit.tx_packets[id_][qno_]\
+					+= credit_;			\
+			}						\
+		} while (0);						\
+	})
+
+#endif /* _PFE_HIF_LIB_H_ */
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_hw.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#include "pfe_mod.h"
+#include "pfe_hw.h"
+
+/* Functions to handle most of pfe hw register initialization */
+int pfe_hw_init(struct pfe *pfe, int resume)
+{
+	struct class_cfg class_cfg = {
+		.pe_sys_clk_ratio = PE_SYS_CLK_RATIO,
+		.route_table_baseaddr = pfe->ddr_phys_baseaddr +
+					ROUTE_TABLE_BASEADDR,
+		.route_table_hash_bits = ROUTE_TABLE_HASH_BITS,
+	};
+
+	struct tmu_cfg tmu_cfg = {
+		.pe_sys_clk_ratio = PE_SYS_CLK_RATIO,
+		.llm_base_addr = pfe->ddr_phys_baseaddr + TMU_LLM_BASEADDR,
+		.llm_queue_len = TMU_LLM_QUEUE_LEN,
+	};
+
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+	struct util_cfg util_cfg = {
+		.pe_sys_clk_ratio = PE_SYS_CLK_RATIO,
+	};
+#endif
+
+	struct BMU_CFG bmu1_cfg = {
+		.baseaddr = CBUS_VIRT_TO_PFE(LMEM_BASE_ADDR +
+						BMU1_LMEM_BASEADDR),
+		.count = BMU1_BUF_COUNT,
+		.size = BMU1_BUF_SIZE,
+		.low_watermark = 10,
+		.high_watermark = 15,
+	};
+
+	struct BMU_CFG bmu2_cfg = {
+		.baseaddr = DDR_PHYS_TO_PFE(pfe->ddr_phys_baseaddr +
+						BMU2_DDR_BASEADDR),
+		.count = BMU2_BUF_COUNT,
+		.size = BMU2_BUF_SIZE,
+		.low_watermark = 250,
+		.high_watermark = 253,
+	};
+
+	struct gpi_cfg egpi1_cfg = {
+		.lmem_rtry_cnt = EGPI1_LMEM_RTRY_CNT,
+		.tmlf_txthres = EGPI1_TMLF_TXTHRES,
+		.aseq_len = EGPI1_ASEQ_LEN,
+		.mtip_pause_reg = CBUS_VIRT_TO_PFE(EMAC1_BASE_ADDR +
+						EMAC_TCNTRL_REG),
+	};
+
+	struct gpi_cfg egpi2_cfg = {
+		.lmem_rtry_cnt = EGPI2_LMEM_RTRY_CNT,
+		.tmlf_txthres = EGPI2_TMLF_TXTHRES,
+		.aseq_len = EGPI2_ASEQ_LEN,
+		.mtip_pause_reg = CBUS_VIRT_TO_PFE(EMAC2_BASE_ADDR +
+						EMAC_TCNTRL_REG),
+	};
+
+	struct gpi_cfg hgpi_cfg = {
+		.lmem_rtry_cnt = HGPI_LMEM_RTRY_CNT,
+		.tmlf_txthres = HGPI_TMLF_TXTHRES,
+		.aseq_len = HGPI_ASEQ_LEN,
+		.mtip_pause_reg = 0,
+	};
+
+	pr_info("%s\n", __func__);
+
+#if !defined(LS1012A_PFE_RESET_WA)
+	/* LS1012A needs this to make PE work correctly */
+	writel(0x3,     CLASS_PE_SYS_CLK_RATIO);
+	writel(0x3,     TMU_PE_SYS_CLK_RATIO);
+	writel(0x3,     UTIL_PE_SYS_CLK_RATIO);
+	usleep_range(10, 20);
+#endif
+
+	pr_info("CLASS version: %x\n", readl(CLASS_VERSION));
+	pr_info("TMU version: %x\n", readl(TMU_VERSION));
+
+	pr_info("BMU1 version: %x\n", readl(BMU1_BASE_ADDR +
+		BMU_VERSION));
+	pr_info("BMU2 version: %x\n", readl(BMU2_BASE_ADDR +
+		BMU_VERSION));
+
+	pr_info("EGPI1 version: %x\n", readl(EGPI1_BASE_ADDR +
+		GPI_VERSION));
+	pr_info("EGPI2 version: %x\n", readl(EGPI2_BASE_ADDR +
+		GPI_VERSION));
+	pr_info("HGPI version: %x\n", readl(HGPI_BASE_ADDR +
+		GPI_VERSION));
+
+	pr_info("HIF version: %x\n", readl(HIF_VERSION));
+	pr_info("HIF NOPCY version: %x\n", readl(HIF_NOCPY_VERSION));
+
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+	pr_info("UTIL version: %x\n", readl(UTIL_VERSION));
+#endif
+	while (!(readl(TMU_CTRL) & ECC_MEM_INIT_DONE))
+		;
+
+	hif_rx_disable();
+	hif_tx_disable();
+
+	bmu_init(BMU1_BASE_ADDR, &bmu1_cfg);
+
+	pr_info("bmu_init(1) done\n");
+
+	bmu_init(BMU2_BASE_ADDR, &bmu2_cfg);
+
+	pr_info("bmu_init(2) done\n");
+
+	class_cfg.resume = resume ? 1 : 0;
+
+	class_init(&class_cfg);
+
+	pr_info("class_init() done\n");
+
+	tmu_init(&tmu_cfg);
+
+	pr_info("tmu_init() done\n");
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+	util_init(&util_cfg);
+
+	pr_info("util_init() done\n");
+#endif
+	gpi_init(EGPI1_BASE_ADDR, &egpi1_cfg);
+
+	pr_info("gpi_init(1) done\n");
+
+	gpi_init(EGPI2_BASE_ADDR, &egpi2_cfg);
+
+	pr_info("gpi_init(2) done\n");
+
+	gpi_init(HGPI_BASE_ADDR, &hgpi_cfg);
+
+	pr_info("gpi_init(hif) done\n");
+
+	bmu_enable(BMU1_BASE_ADDR);
+
+	pr_info("bmu_enable(1) done\n");
+
+	bmu_enable(BMU2_BASE_ADDR);
+
+	pr_info("bmu_enable(2) done\n");
+
+	return 0;
+}
+
+void pfe_hw_exit(struct pfe *pfe)
+{
+	pr_info("%s\n", __func__);
+
+	bmu_disable(BMU1_BASE_ADDR);
+	bmu_reset(BMU1_BASE_ADDR);
+
+	bmu_disable(BMU2_BASE_ADDR);
+	bmu_reset(BMU2_BASE_ADDR);
+}
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_hw.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#ifndef _PFE_HW_H_
+#define _PFE_HW_H_
+
+#define PE_SYS_CLK_RATIO	1	/* SYS/AXI = 250MHz, HFE = 500MHz */
+
+int pfe_hw_init(struct pfe *pfe, int resume);
+void pfe_hw_exit(struct pfe *pfe);
+
+#endif /* _PFE_HW_H_ */
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_net.h>
+#include <linux/of_address.h>
+#include <linux/of_mdio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include "pfe_mod.h"
+
+extern bool pfe_use_old_dts_phy;
+struct ls1012a_pfe_platform_data pfe_platform_data;
+
+static int pfe_get_gemac_if_properties(struct device_node *gem,
+				       int port,
+				       struct ls1012a_pfe_platform_data	*pdata)
+{
+	struct device_node *phy_node = NULL;
+	int size;
+	int phy_id = 0;
+	const u32 *addr;
+	int err;
+
+	addr = of_get_property(gem, "reg", &size);
+	if (addr)
+		port = be32_to_cpup(addr);
+	else
+		goto err;
+
+	pdata->ls1012a_eth_pdata[port].gem_id = port;
+
+	err = of_get_mac_address(gem, pdata->ls1012a_eth_pdata[port].mac_addr);
+
+	phy_node = of_parse_phandle(gem, "phy-handle", 0);
+	pdata->ls1012a_eth_pdata[port].phy_node = phy_node;
+	if (phy_node) {
+		pfe_use_old_dts_phy = false;
+		goto process_phynode;
+	} else if (of_phy_is_fixed_link(gem)) {
+		pfe_use_old_dts_phy = false;
+		if (of_phy_register_fixed_link(gem) < 0) {
+			pr_err("broken fixed-link specification\n");
+			goto err;
+		}
+		phy_node = of_node_get(gem);
+		pdata->ls1012a_eth_pdata[port].phy_node = phy_node;
+	} else if (of_get_property(gem, "fsl,pfe-phy-if-flags", &size)) {
+		pfe_use_old_dts_phy = true;
+		/* Use old dts properties for phy handling */
+		addr = of_get_property(gem, "fsl,pfe-phy-if-flags", &size);
+		pdata->ls1012a_eth_pdata[port].phy_flags = be32_to_cpup(addr);
+
+		addr = of_get_property(gem, "fsl,gemac-phy-id", &size);
+		if (!addr) {
+			pr_err("%s:%d Invalid gemac-phy-id....\n", __func__,
+			       __LINE__);
+		} else {
+			phy_id = be32_to_cpup(addr);
+			pdata->ls1012a_eth_pdata[port].phy_id = phy_id;
+			pdata->ls1012a_mdio_pdata[0].phy_mask &= ~(1 << phy_id);
+		}
+
+		/* If PHY is enabled, read mdio properties */
+		if (pdata->ls1012a_eth_pdata[port].phy_flags & GEMAC_NO_PHY)
+			goto done;
+
+	} else {
+		pr_info("%s: No PHY or fixed-link\n", __func__);
+		return 0;
+	}
+
+process_phynode:
+	err = of_get_phy_mode(gem, &pdata->ls1012a_eth_pdata[port].mii_config);
+	if (err)
+		pr_err("%s:%d Incorrect Phy mode....\n", __func__,
+		       __LINE__);
+
+	addr = of_get_property(gem, "fsl,mdio-mux-val", &size);
+	if (!addr) {
+		pr_err("%s: Invalid mdio-mux-val....\n", __func__);
+	} else {
+		phy_id = be32_to_cpup(addr);
+		pdata->ls1012a_eth_pdata[port].mdio_muxval = phy_id;
+	}
+
+	if (pdata->ls1012a_eth_pdata[port].phy_id < 32)
+		pfe->mdio_muxval[pdata->ls1012a_eth_pdata[port].phy_id] =
+			 pdata->ls1012a_eth_pdata[port].mdio_muxval;
+
+
+	pdata->ls1012a_mdio_pdata[port].irq[0] = PHY_POLL;
+
+done:
+	return 0;
+
+err:
+	return -1;
+}
+
+/*
+ *
+ * pfe_platform_probe -
+ *
+ *
+ */
+static int pfe_platform_probe(struct platform_device *pdev)
+{
+	struct resource res;
+	int ii = 0, rc, interface_count = 0, size = 0;
+	const u32 *prop;
+	struct device_node *np, *gem = NULL;
+	struct clk *pfe_clk;
+
+	np = pdev->dev.of_node;
+
+	if (!np) {
+		pr_err("Invalid device node\n");
+		return -EINVAL;
+	}
+
+	pfe = kzalloc(sizeof(*pfe), GFP_KERNEL);
+	if (!pfe) {
+		rc = -ENOMEM;
+		goto err_alloc;
+	}
+
+	platform_set_drvdata(pdev, pfe);
+
+	if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32))) {
+		rc = -ENOMEM;
+		pr_err("unable to configure DMA mask.\n");
+		goto err_ddr;
+	}
+
+	if (of_address_to_resource(np, 1, &res)) {
+		rc = -ENOMEM;
+		pr_err("failed to get ddr resource\n");
+		goto err_ddr;
+	}
+
+	pfe->ddr_phys_baseaddr = res.start;
+	pfe->ddr_size = resource_size(&res);
+
+	pfe->ddr_baseaddr = memremap(res.start, resource_size(&res),
+				     MEMREMAP_WB);
+	if (!pfe->ddr_baseaddr) {
+		pr_err("memremap() ddr failed\n");
+		rc = -ENOMEM;
+		goto err_ddr;
+	}
+
+	pfe->scfg =
+		syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+						"fsl,pfe-scfg");
+	if (IS_ERR(pfe->scfg)) {
+		dev_err(&pdev->dev, "No syscfg phandle specified\n");
+		return PTR_ERR(pfe->scfg);
+	}
+
+	pfe->cbus_baseaddr = of_iomap(np, 0);
+	if (!pfe->cbus_baseaddr) {
+		rc = -ENOMEM;
+		pr_err("failed to get axi resource\n");
+		goto err_axi;
+	}
+
+	pfe->hif_irq = platform_get_irq(pdev, 0);
+	if (pfe->hif_irq < 0) {
+		pr_err("platform_get_irq for hif failed\n");
+		rc = pfe->hif_irq;
+		goto err_hif_irq;
+	}
+
+	pfe->wol_irq = platform_get_irq(pdev, 2);
+	if (pfe->wol_irq < 0) {
+		pr_err("platform_get_irq for WoL failed\n");
+		rc = pfe->wol_irq;
+		goto err_hif_irq;
+	}
+
+	/* Read interface count */
+	prop = of_get_property(np, "fsl,pfe-num-interfaces", &size);
+	if (!prop) {
+		pr_err("Failed to read number of interfaces\n");
+		rc = -ENXIO;
+		goto err_prop;
+	}
+
+	interface_count = be32_to_cpup(prop);
+	if (interface_count <= 0) {
+		pr_err("No ethernet interface count : %d\n",
+		       interface_count);
+		rc = -ENXIO;
+		goto err_prop;
+	}
+
+	pfe_platform_data.ls1012a_mdio_pdata[0].phy_mask = 0xffffffff;
+
+	while ((gem = of_get_next_child(np, gem))) {
+		if (of_find_property(gem, "reg", &size)) {
+			pfe_get_gemac_if_properties(gem, ii,
+						&pfe_platform_data);
+			ii++;
+		}
+	}
+
+	if (interface_count != ii)
+		pr_info("missing some of gemac interface properties.\n");
+
+	pfe->dev = &pdev->dev;
+
+	pfe->dev->platform_data = &pfe_platform_data;
+
+	/* declare WoL capabilities */
+	device_init_wakeup(&pdev->dev, true);
+
+	/* find the clocks */
+	pfe_clk = devm_clk_get(pfe->dev, "pfe");
+	if (IS_ERR(pfe_clk))
+		return PTR_ERR(pfe_clk);
+
+	/* PFE clock is (platform clock / 2) */
+	/* save sys_clk value as KHz */
+	pfe->ctrl.sys_clk = clk_get_rate(pfe_clk) / (2 * 1000);
+
+	rc = pfe_probe(pfe);
+	if (rc < 0)
+		goto err_probe;
+
+	return 0;
+
+err_probe:
+err_prop:
+err_hif_irq:
+	iounmap(pfe->cbus_baseaddr);
+
+err_axi:
+	memunmap(pfe->ddr_baseaddr);
+
+err_ddr:
+	platform_set_drvdata(pdev, NULL);
+
+	kfree(pfe);
+
+err_alloc:
+	return rc;
+}
+
+/*
+ * pfe_platform_remove -
+ */
+static void pfe_platform_remove(struct platform_device *pdev)
+{
+	struct pfe *pfe = platform_get_drvdata(pdev);
+	int rc;
+
+	pr_info("%s\n", __func__);
+
+	rc = pfe_remove(pfe);
+
+	iounmap(pfe->cbus_baseaddr);
+
+	memunmap(pfe->ddr_baseaddr);
+
+	platform_set_drvdata(pdev, NULL);
+
+	kfree(pfe);
+}
+
+#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
+static int pfe_platform_suspend(struct device *dev)
+{
+	struct pfe *pfe = platform_get_drvdata(to_platform_device(dev));
+	struct net_device *netdev;
+	int i;
+
+	pfe->wake = 0;
+
+	for (i = 0; i < (NUM_GEMAC_SUPPORT); i++) {
+		netdev = pfe->eth.eth_priv[i]->ndev;
+
+		netif_device_detach(netdev);
+
+		if (netif_running(netdev))
+			if (pfe_eth_suspend(netdev))
+				pfe->wake = 1;
+	}
+
+	/* Shutdown PFE only if we're not waking up the system */
+	if (!pfe->wake) {
+#if defined(LS1012A_PFE_RESET_WA)
+		pfe_hif_rx_idle(&pfe->hif);
+#endif
+		pfe_ctrl_suspend(&pfe->ctrl);
+		pfe_firmware_exit(pfe);
+
+		pfe_hif_exit(pfe);
+		pfe_hif_lib_exit(pfe);
+
+		pfe_hw_exit(pfe);
+	}
+
+	return 0;
+}
+
+static int pfe_platform_resume(struct device *dev)
+{
+	struct pfe *pfe = platform_get_drvdata(to_platform_device(dev));
+	struct net_device *netdev;
+	int i;
+
+	if (!pfe->wake) {
+		pfe_hw_init(pfe, 1);
+		pfe_hif_lib_init(pfe);
+		pfe_hif_init(pfe);
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+		util_enable();
+#endif
+		tmu_enable(0xf);
+		class_enable();
+		pfe_ctrl_resume(&pfe->ctrl);
+	}
+
+	for (i = 0; i < (NUM_GEMAC_SUPPORT); i++) {
+		netdev = pfe->eth.eth_priv[i]->ndev;
+
+		if (pfe->mdio.mdio_priv[i]->mii_bus)
+			pfe_eth_mdio_reset(pfe->mdio.mdio_priv[i]->mii_bus);
+
+		if (netif_running(netdev))
+			pfe_eth_resume(netdev);
+
+		netif_device_attach(netdev);
+	}
+	return 0;
+}
+#else
+#define pfe_platform_suspend NULL
+#define pfe_platform_resume NULL
+#endif
+
+static const struct dev_pm_ops pfe_platform_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pfe_platform_suspend, pfe_platform_resume)
+};
+#endif
+
+static const struct of_device_id pfe_match[] = {
+	{
+		.compatible = "fsl,pfe",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, pfe_match);
+
+static struct platform_driver pfe_platform_driver = {
+	.probe = pfe_platform_probe,
+	.remove = pfe_platform_remove,
+	.driver = {
+		.name = "pfe",
+		.of_match_table = pfe_match,
+#ifdef CONFIG_PM
+		.pm = &pfe_platform_pm_ops,
+#endif
+	},
+};
+
+module_platform_driver(pfe_platform_driver);
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PFE Ethernet driver");
+MODULE_AUTHOR("NXP DNCPE");
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_mod.c
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#include <linux/dma-mapping.h>
+#include "pfe_mod.h"
+#include "pfe_cdev.h"
+
+unsigned int us;
+module_param(us, uint, 0444);
+MODULE_PARM_DESC(us, "0: module enabled for kernel networking (DEFAULT)\n"
+			"1: module enabled for userspace networking\n");
+struct pfe *pfe;
+
+/*
+ * pfe_probe -
+ */
+int pfe_probe(struct pfe *pfe)
+{
+	int rc;
+
+	if (pfe->ddr_size < DDR_MAX_SIZE) {
+		pr_err("%s: required DDR memory (%x) above platform ddr memory (%x)\n",
+		       __func__, (unsigned int)DDR_MAX_SIZE, pfe->ddr_size);
+		rc = -ENOMEM;
+		goto err_hw;
+	}
+
+	if (((int)(pfe->ddr_phys_baseaddr + BMU2_DDR_BASEADDR) &
+			(8 * SZ_1M - 1)) != 0) {
+		pr_err("%s: BMU2 base address (0x%x) must be aligned on 8MB boundary\n",
+		       __func__, (int)pfe->ddr_phys_baseaddr +
+			BMU2_DDR_BASEADDR);
+		rc = -ENOMEM;
+		goto err_hw;
+	}
+
+	pr_info("cbus_baseaddr: %lx, ddr_baseaddr: %lx, ddr_phys_baseaddr: %lx, ddr_size: %x\n",
+		(unsigned long)pfe->cbus_baseaddr,
+		(unsigned long)pfe->ddr_baseaddr,
+		pfe->ddr_phys_baseaddr, pfe->ddr_size);
+
+	pfe_lib_init(pfe->cbus_baseaddr, pfe->ddr_baseaddr,
+		     pfe->ddr_phys_baseaddr, pfe->ddr_size);
+
+	rc = pfe_hw_init(pfe, 0);
+	if (rc < 0)
+		goto err_hw;
+
+	if (us)
+		goto firmware_init;
+
+	rc = pfe_hif_lib_init(pfe);
+	if (rc < 0)
+		goto err_hif_lib;
+
+	rc = pfe_hif_init(pfe);
+	if (rc < 0)
+		goto err_hif;
+
+firmware_init:
+	rc = pfe_firmware_init(pfe);
+	if (rc < 0)
+		goto err_firmware;
+
+	rc = pfe_ctrl_init(pfe);
+	if (rc < 0)
+		goto err_ctrl;
+
+	rc = pfe_eth_init(pfe);
+	if (rc < 0)
+		goto err_eth;
+
+	rc = pfe_sysfs_init(pfe);
+	if (rc < 0)
+		goto err_sysfs;
+
+	rc = pfe_debugfs_init(pfe);
+	if (rc < 0)
+		goto err_debugfs;
+
+	if (us) {
+		/* Creating a character device */
+		rc = pfe_cdev_init();
+		if (rc < 0)
+			goto err_cdev;
+	}
+
+	return 0;
+
+err_cdev:
+	pfe_debugfs_exit(pfe);
+
+err_debugfs:
+	pfe_sysfs_exit(pfe);
+
+err_sysfs:
+	pfe_eth_exit(pfe);
+
+err_eth:
+	pfe_ctrl_exit(pfe);
+
+err_ctrl:
+	pfe_firmware_exit(pfe);
+
+err_firmware:
+	if (us)
+		goto err_hif_lib;
+
+	pfe_hif_exit(pfe);
+
+err_hif:
+	pfe_hif_lib_exit(pfe);
+
+err_hif_lib:
+	pfe_hw_exit(pfe);
+
+err_hw:
+	return rc;
+}
+
+/*
+ * pfe_remove -
+ */
+int pfe_remove(struct pfe *pfe)
+{
+	pr_info("%s\n", __func__);
+
+	if (us)
+		pfe_cdev_exit();
+
+	pfe_debugfs_exit(pfe);
+
+	pfe_sysfs_exit(pfe);
+
+	pfe_eth_exit(pfe);
+
+	pfe_ctrl_exit(pfe);
+
+#if defined(LS1012A_PFE_RESET_WA)
+	pfe_hif_rx_idle(&pfe->hif);
+#endif
+	pfe_firmware_exit(pfe);
+
+	if (us)
+		goto hw_exit;
+
+	pfe_hif_exit(pfe);
+
+	pfe_hif_lib_exit(pfe);
+
+hw_exit:
+	pfe_hw_exit(pfe);
+
+	return 0;
+}
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_mod.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#ifndef _PFE_MOD_H_
+#define _PFE_MOD_H_
+
+#include <linux/device.h>
+#include <linux/elf.h>
+
+extern unsigned int us;
+
+struct pfe;
+
+#include "pfe_hw.h"
+#include "pfe_firmware.h"
+#include "pfe_ctrl.h"
+#include "pfe_hif.h"
+#include "pfe_hif_lib.h"
+#include "pfe_eth.h"
+#include "pfe_sysfs.h"
+#include "pfe_perfmon.h"
+#include "pfe_debugfs.h"
+
+#define PHYID_MAX_VAL 32
+
+struct pfe_tmu_credit {
+	/* Number of allowed TX packet in-flight, matches TMU queue size */
+	unsigned int tx_credit[NUM_GEMAC_SUPPORT][EMAC_TXQ_CNT];
+	unsigned int tx_credit_max[NUM_GEMAC_SUPPORT][EMAC_TXQ_CNT];
+	unsigned int tx_packets[NUM_GEMAC_SUPPORT][EMAC_TXQ_CNT];
+};
+
+struct pfe {
+	struct regmap	*scfg;
+	unsigned long ddr_phys_baseaddr;
+	void *ddr_baseaddr;
+	unsigned int ddr_size;
+	void *cbus_baseaddr;
+	void *apb_baseaddr;
+	unsigned long iram_phys_baseaddr;
+	void *iram_baseaddr;
+	unsigned long ipsec_phys_baseaddr;
+	void *ipsec_baseaddr;
+	int hif_irq;
+	int wol_irq;
+	int hif_client_irq;
+	struct device *dev;
+	struct dentry *dentry;
+	struct pfe_ctrl ctrl;
+	struct pfe_hif hif;
+	struct pfe_eth eth;
+	struct pfe_mdio mdio;
+	struct hif_client_s *hif_client[HIF_CLIENTS_MAX];
+#if defined(CFG_DIAGS)
+	struct pfe_diags diags;
+#endif
+	struct pfe_tmu_credit tmu_credit;
+	struct pfe_cpumon cpumon;
+	struct pfe_memmon memmon;
+	int wake;
+	int mdio_muxval[PHYID_MAX_VAL];
+	struct clk *hfe_clock;
+};
+
+extern struct pfe *pfe;
+
+int pfe_probe(struct pfe *pfe);
+int pfe_remove(struct pfe *pfe);
+
+/* DDR Mapping in reserved memory*/
+#define ROUTE_TABLE_BASEADDR	0
+#define ROUTE_TABLE_HASH_BITS	15	/* 32K entries */
+#define ROUTE_TABLE_SIZE	((1 << ROUTE_TABLE_HASH_BITS) \
+				  * CLASS_ROUTE_SIZE)
+#define BMU2_DDR_BASEADDR	(ROUTE_TABLE_BASEADDR + ROUTE_TABLE_SIZE)
+#define BMU2_BUF_COUNT		(4096 - 256)
+/* This is to get a total DDR size of 12MiB */
+#define BMU2_DDR_SIZE		(DDR_BUF_SIZE * BMU2_BUF_COUNT)
+#define UTIL_CODE_BASEADDR	(BMU2_DDR_BASEADDR + BMU2_DDR_SIZE)
+#define UTIL_CODE_SIZE		(128 * SZ_1K)
+#define UTIL_DDR_DATA_BASEADDR	(UTIL_CODE_BASEADDR + UTIL_CODE_SIZE)
+#define UTIL_DDR_DATA_SIZE	(64 * SZ_1K)
+#define CLASS_DDR_DATA_BASEADDR	(UTIL_DDR_DATA_BASEADDR + UTIL_DDR_DATA_SIZE)
+#define CLASS_DDR_DATA_SIZE	(32 * SZ_1K)
+#define TMU_DDR_DATA_BASEADDR	(CLASS_DDR_DATA_BASEADDR + CLASS_DDR_DATA_SIZE)
+#define TMU_DDR_DATA_SIZE	(32 * SZ_1K)
+#define TMU_LLM_BASEADDR	(TMU_DDR_DATA_BASEADDR + TMU_DDR_DATA_SIZE)
+#define TMU_LLM_QUEUE_LEN	(8 * 512)
+/* Must be power of two and at least 16 * 8 = 128 bytes */
+#define TMU_LLM_SIZE		(4 * 16 * TMU_LLM_QUEUE_LEN)
+/* (4 TMU's x 16 queues x queue_len) */
+
+#define DDR_MAX_SIZE		(TMU_LLM_BASEADDR + TMU_LLM_SIZE)
+
+/* LMEM Mapping */
+#define BMU1_LMEM_BASEADDR	0
+#define BMU1_BUF_COUNT		256
+#define BMU1_LMEM_SIZE		(LMEM_BUF_SIZE * BMU1_BUF_COUNT)
+
+#endif /* _PFE_MOD_H */
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_perfmon.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#ifndef _PFE_PERFMON_H_
+#define _PFE_PERFMON_H_
+
+#include "pfe/pfe.h"
+
+#define	CT_CPUMON_INTERVAL	(1 * TIMER_TICKS_PER_SEC)
+
+struct pfe_cpumon {
+	u32 cpu_usage_pct[MAX_PE];
+	u32 class_usage_pct;
+};
+
+struct pfe_memmon {
+	u32 kernel_memory_allocated;
+};
+
+int pfe_perfmon_init(struct pfe *pfe);
+void pfe_perfmon_exit(struct pfe *pfe);
+
+#endif /* _PFE_PERFMON_H_ */
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_sysfs.c
@@ -0,0 +1,840 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "pfe_mod.h"
+
+#define PE_EXCEPTION_DUMP_ADDRESS 0x1fa8
+#define NUM_QUEUES		16
+
+static char register_name[20][5] = {
+	"EPC", "ECAS", "EID", "ED",
+	"r0", "r1", "r2", "r3",
+	"r4", "r5", "r6", "r7",
+	"r8", "r9", "r10", "r11",
+	"r12", "r13", "r14", "r15",
+};
+
+static char exception_name[14][20] = {
+	"Reset",
+	"HardwareFailure",
+	"NMI",
+	"InstBreakpoint",
+	"DataBreakpoint",
+	"Unsupported",
+	"PrivilegeViolation",
+	"InstBusError",
+	"DataBusError",
+	"AlignmentError",
+	"ArithmeticError",
+	"SystemCall",
+	"MemoryManagement",
+	"Interrupt",
+};
+
+static unsigned long class_do_clear;
+static unsigned long tmu_do_clear;
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+static unsigned long util_do_clear;
+#endif
+
+static ssize_t display_pe_status(char *buf, int id, u32 dmem_addr, unsigned long
+					do_clear)
+{
+	ssize_t len = 0;
+	u32 val;
+	char statebuf[5];
+	struct pfe_cpumon *cpumon = &pfe->cpumon;
+	u32 debug_indicator;
+	u32 debug[20];
+
+	if (id < CLASS0_ID || id >= MAX_PE)
+		return len;
+
+	*(u32 *)statebuf = pe_dmem_read(id, dmem_addr, 4);
+	dmem_addr += 4;
+
+	statebuf[4] = '\0';
+	len += sprintf(buf + len, "state=%4s ", statebuf);
+
+	val = pe_dmem_read(id, dmem_addr, 4);
+	dmem_addr += 4;
+	len += sprintf(buf + len, "ctr=%08x ", cpu_to_be32(val));
+
+	val = pe_dmem_read(id, dmem_addr, 4);
+	if (do_clear && val)
+		pe_dmem_write(id, 0, dmem_addr, 4);
+	dmem_addr += 4;
+	len += sprintf(buf + len, "rx=%u ", cpu_to_be32(val));
+
+	val = pe_dmem_read(id, dmem_addr, 4);
+	if (do_clear && val)
+		pe_dmem_write(id, 0, dmem_addr, 4);
+	dmem_addr += 4;
+	if (id >= TMU0_ID && id <= TMU_MAX_ID)
+		len += sprintf(buf + len, "qstatus=%x", cpu_to_be32(val));
+	else
+		len += sprintf(buf + len, "tx=%u", cpu_to_be32(val));
+
+	val = pe_dmem_read(id, dmem_addr, 4);
+	if (do_clear && val)
+		pe_dmem_write(id, 0, dmem_addr, 4);
+	dmem_addr += 4;
+	if (val)
+		len += sprintf(buf + len, " drop=%u", cpu_to_be32(val));
+
+	len += sprintf(buf + len, " load=%d%%", cpumon->cpu_usage_pct[id]);
+
+	len += sprintf(buf + len, "\n");
+
+	debug_indicator = pe_dmem_read(id, dmem_addr, 4);
+	dmem_addr += 4;
+	if (!strncmp((char *)&debug_indicator, "DBUG", 4)) {
+		int j, last = 0;
+
+		for (j = 0; j < 16; j++) {
+			debug[j] = pe_dmem_read(id, dmem_addr, 4);
+			if (debug[j]) {
+				if (do_clear)
+					pe_dmem_write(id, 0, dmem_addr, 4);
+				last = j + 1;
+			}
+			dmem_addr += 4;
+		}
+		for (j = 0; j < last; j++) {
+			len += sprintf(buf + len, "%08x%s",
+			cpu_to_be32(debug[j]),
+			(j & 0x7) == 0x7 || j == last - 1 ? "\n" : " ");
+		}
+	}
+
+	if (!strncmp(statebuf, "DEAD", 4)) {
+		u32 i, dump = PE_EXCEPTION_DUMP_ADDRESS;
+
+		len += sprintf(buf + len, "Exception details:\n");
+		for (i = 0; i < 20; i++) {
+			debug[i] = pe_dmem_read(id, dump, 4);
+			dump += 4;
+			if (i == 2)
+				len += sprintf(buf + len, "%4s = %08x (=%s) ",
+				register_name[i], cpu_to_be32(debug[i]),
+				exception_name[min((u32)
+				cpu_to_be32(debug[i]), (u32)13)]);
+			else
+				len += sprintf(buf + len, "%4s = %08x%s",
+				register_name[i], cpu_to_be32(debug[i]),
+				(i & 0x3) == 0x3 || i == 19 ? "\n" : " ");
+		}
+	}
+
+	return len;
+}
+
+static ssize_t class_phy_stats(char *buf, int phy)
+{
+	ssize_t len = 0;
+	int off1 = phy * 0x28;
+	int off2 = phy * 0x10;
+
+	if (phy == 3)
+		off1 = CLASS_PHY4_RX_PKTS - CLASS_PHY1_RX_PKTS;
+
+	len += sprintf(buf + len, "phy: %d\n", phy);
+	len += sprintf(buf + len,
+			"  rx:   %10u, tx:   %10u, intf:  %10u, ipv4:    %10u, ipv6: %10u\n",
+			readl(CLASS_PHY1_RX_PKTS + off1),
+			readl(CLASS_PHY1_TX_PKTS + off1),
+			readl(CLASS_PHY1_INTF_MATCH_PKTS + off1),
+			readl(CLASS_PHY1_V4_PKTS + off1),
+			readl(CLASS_PHY1_V6_PKTS + off1));
+
+	len += sprintf(buf + len,
+			"  icmp: %10u, igmp: %10u, tcp:   %10u, udp:     %10u\n",
+			readl(CLASS_PHY1_ICMP_PKTS + off2),
+			readl(CLASS_PHY1_IGMP_PKTS + off2),
+			readl(CLASS_PHY1_TCP_PKTS + off2),
+			readl(CLASS_PHY1_UDP_PKTS + off2));
+
+	len += sprintf(buf + len, "  err\n");
+	len += sprintf(buf + len,
+			"  lp:   %10u, intf: %10u, l3:    %10u, chcksum: %10u, ttl:  %10u\n",
+			readl(CLASS_PHY1_LP_FAIL_PKTS + off1),
+			readl(CLASS_PHY1_INTF_FAIL_PKTS + off1),
+			readl(CLASS_PHY1_L3_FAIL_PKTS + off1),
+			readl(CLASS_PHY1_CHKSUM_ERR_PKTS + off1),
+			readl(CLASS_PHY1_TTL_ERR_PKTS + off1));
+
+	return len;
+}
+
+/* qm_read_drop_stat
+ * This function is used to read the drop statistics from the TMU
+ * hw drop counter.  Since the hw counter is always cleared afer
+ * reading, this function maintains the previous drop count, and
+ * adds the new value to it.  That value can be retrieved by
+ * passing a pointer to it with the total_drops arg.
+ *
+ * @param tmu		TMU number (0 - 3)
+ * @param queue		queue number (0 - 15)
+ * @param total_drops	pointer to location to store total drops (or NULL)
+ * @param do_reset	if TRUE, clear total drops after updating
+ */
+u32 qm_read_drop_stat(u32 tmu, u32 queue, u32 *total_drops, int do_reset)
+{
+	static u32 qtotal[TMU_MAX_ID + 1][NUM_QUEUES];
+	u32 val;
+
+	writel((tmu << 8) | queue, TMU_TEQ_CTRL);
+	writel((tmu << 8) | queue, TMU_LLM_CTRL);
+	val = readl(TMU_TEQ_DROP_STAT);
+	qtotal[tmu][queue] += val;
+	if (total_drops)
+		*total_drops = qtotal[tmu][queue];
+	if (do_reset)
+		qtotal[tmu][queue] = 0;
+	return val;
+}
+
+static ssize_t tmu_queue_stats(char *buf, int tmu, int queue)
+{
+	ssize_t len = 0;
+	u32 drops;
+
+	len += sprintf(buf + len, "%d-%02d, ", tmu, queue);
+
+	drops = qm_read_drop_stat(tmu, queue, NULL, 0);
+
+	/* Select queue */
+	writel((tmu << 8) | queue, TMU_TEQ_CTRL);
+	writel((tmu << 8) | queue, TMU_LLM_CTRL);
+
+	len += sprintf(buf + len,
+			"(teq) drop: %10u, tx: %10u (llm) head: %08x, tail: %08x, drop: %10u\n",
+		drops, readl(TMU_TEQ_TRANS_STAT),
+		readl(TMU_LLM_QUE_HEADPTR), readl(TMU_LLM_QUE_TAILPTR),
+		readl(TMU_LLM_QUE_DROPCNT));
+
+	return len;
+}
+
+static ssize_t tmu_queues(char *buf, int tmu)
+{
+	ssize_t len = 0;
+	int queue;
+
+	for (queue = 0; queue < 16; queue++)
+		len += tmu_queue_stats(buf + len, tmu, queue);
+
+	return len;
+}
+
+static ssize_t block_version(char *buf, void *addr)
+{
+	ssize_t len = 0;
+	u32 val;
+
+	val = readl(addr);
+	len += sprintf(buf + len, "revision: %x, version: %x, id: %x\n",
+		(val >> 24) & 0xff, (val >> 16) & 0xff, val & 0xffff);
+
+	return len;
+}
+
+static ssize_t bmu(char *buf, int id, void *base)
+{
+	ssize_t len = 0;
+
+	len += sprintf(buf + len, "%s: %d\n  ", __func__, id);
+
+	len += block_version(buf + len, base + BMU_VERSION);
+
+	len += sprintf(buf + len, "  buf size:  %x\n", (1 << readl(base +
+			BMU_BUF_SIZE)));
+	len += sprintf(buf + len, "  buf count: %x\n", readl(base +
+			BMU_BUF_CNT));
+	len += sprintf(buf + len, "  buf rem:   %x\n", readl(base +
+			BMU_REM_BUF_CNT));
+	len += sprintf(buf + len, "  buf curr:  %x\n", readl(base +
+			BMU_CURR_BUF_CNT));
+	len += sprintf(buf + len, "  free err:  %x\n", readl(base +
+			BMU_FREE_ERR_ADDR));
+
+	return len;
+}
+
+static ssize_t gpi(char *buf, int id, void *base)
+{
+	ssize_t len = 0;
+	u32 val;
+
+	len += sprintf(buf + len, "%s%d:\n  ", __func__, id);
+	len += block_version(buf + len, base + GPI_VERSION);
+
+	len += sprintf(buf + len, "  tx under stick: %x\n", readl(base +
+			GPI_FIFO_STATUS));
+	val = readl(base + GPI_FIFO_DEBUG);
+	len += sprintf(buf + len, "  tx pkts:        %x\n", (val >> 23) &
+			0x3f);
+	len += sprintf(buf + len, "  rx pkts:        %x\n", (val >> 18) &
+			0x3f);
+	len += sprintf(buf + len, "  tx bytes:       %x\n", (val >> 9) &
+			0x1ff);
+	len += sprintf(buf + len, "  rx bytes:       %x\n", (val >> 0) &
+			0x1ff);
+	len += sprintf(buf + len, "  overrun:        %x\n", readl(base +
+			GPI_OVERRUN_DROPCNT));
+
+	return len;
+}
+
+static ssize_t pfe_set_class(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	class_do_clear = kstrtoul(buf, 0, 0);
+	return count;
+}
+
+static ssize_t pfe_show_class(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	ssize_t len = 0;
+	int id;
+	u32 val;
+	struct pfe_cpumon *cpumon = &pfe->cpumon;
+
+	len += block_version(buf + len, CLASS_VERSION);
+
+	for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) {
+		len += sprintf(buf + len, "%d: ", id - CLASS0_ID);
+
+		val = readl(CLASS_PE0_DEBUG + id * 4);
+		len += sprintf(buf + len, "pc=1%04x ", val & 0xffff);
+
+		len += display_pe_status(buf + len, id, CLASS_DM_PESTATUS,
+						class_do_clear);
+	}
+	len += sprintf(buf + len, "aggregate load=%d%%\n\n",
+			cpumon->class_usage_pct);
+
+	len += sprintf(buf + len, "pe status:   0x%x\n",
+			readl(CLASS_PE_STATUS));
+	len += sprintf(buf + len, "max buf cnt: 0x%x   afull thres: 0x%x\n",
+			readl(CLASS_MAX_BUF_CNT), readl(CLASS_AFULL_THRES));
+	len += sprintf(buf + len, "tsq max cnt: 0x%x   tsq fifo thres: 0x%x\n",
+			readl(CLASS_TSQ_MAX_CNT), readl(CLASS_TSQ_FIFO_THRES));
+	len += sprintf(buf + len, "state:       0x%x\n", readl(CLASS_STATE));
+
+	len += class_phy_stats(buf + len, 0);
+	len += class_phy_stats(buf + len, 1);
+	len += class_phy_stats(buf + len, 2);
+	len += class_phy_stats(buf + len, 3);
+
+	return len;
+}
+
+static ssize_t pfe_set_tmu(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	tmu_do_clear = kstrtoul(buf, 0, 0);
+	return count;
+}
+
+static ssize_t pfe_show_tmu(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	ssize_t len = 0;
+	int id;
+	u32 val;
+
+	len += block_version(buf + len, TMU_VERSION);
+
+	for (id = TMU0_ID; id <= TMU_MAX_ID; id++) {
+		if (id == TMU2_ID)
+			continue;
+		len += sprintf(buf + len, "%d: ", id - TMU0_ID);
+
+		len += display_pe_status(buf + len, id, TMU_DM_PESTATUS,
+						tmu_do_clear);
+	}
+
+	len += sprintf(buf + len, "pe status:    %x\n", readl(TMU_PE_STATUS));
+	len += sprintf(buf + len, "inq fifo cnt: %x\n",
+			readl(TMU_PHY_INQ_FIFO_CNT));
+	val = readl(TMU_INQ_STAT);
+	len += sprintf(buf + len, "inq wr ptr:     %x\n", val & 0x3ff);
+	len += sprintf(buf + len, "inq rd ptr:     %x\n", val >> 10);
+
+	return len;
+}
+
+static unsigned long drops_do_clear;
+static u32 class_drop_counter[CLASS_NUM_DROP_COUNTERS];
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+static u32 util_drop_counter[UTIL_NUM_DROP_COUNTERS];
+#endif
+
+char *class_drop_description[CLASS_NUM_DROP_COUNTERS] = {
+	"ICC",
+	"Host Pkt Error",
+	"Rx Error",
+	"IPsec Outbound",
+	"IPsec Inbound",
+	"EXPT IPsec Error",
+	"Reassembly",
+	"Fragmenter",
+	"NAT-T",
+	"Socket",
+	"Multicast",
+	"NAT-PT",
+	"Tx Disabled",
+};
+
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+char *util_drop_description[UTIL_NUM_DROP_COUNTERS] = {
+	"IPsec Outbound",
+	"IPsec Inbound",
+	"IPsec Rate Limiter",
+	"Fragmenter",
+	"Socket",
+	"Tx Disabled",
+	"Rx Error",
+};
+#endif
+
+static ssize_t pfe_set_drops(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	drops_do_clear = kstrtoul(buf, 0, 0);
+	return count;
+}
+
+static u32 tmu_drops[4][16];
+static ssize_t pfe_show_drops(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	ssize_t len = 0;
+	int id, dropnum;
+	int tmu, queue;
+	u32 val;
+	u32 dmem_addr;
+	int num_class_drops = 0, num_tmu_drops = 0, num_util_drops = 0;
+	struct pfe_ctrl *ctrl = &pfe->ctrl;
+
+	memset(class_drop_counter, 0, sizeof(class_drop_counter));
+	for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) {
+		if (drops_do_clear)
+			pe_sync_stop(ctrl, (1 << id));
+		for (dropnum = 0; dropnum < CLASS_NUM_DROP_COUNTERS;
+			dropnum++) {
+			dmem_addr = CLASS_DM_DROP_CNTR;
+			val = be32_to_cpu(pe_dmem_read(id, dmem_addr, 4));
+			class_drop_counter[dropnum] += val;
+			num_class_drops += val;
+			if (drops_do_clear)
+				pe_dmem_write(id, 0, dmem_addr, 4);
+		}
+		if (drops_do_clear)
+			pe_start(ctrl, (1 << id));
+	}
+
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+	if (drops_do_clear)
+		pe_sync_stop(ctrl, (1 << UTIL_ID));
+	for (dropnum = 0; dropnum < UTIL_NUM_DROP_COUNTERS; dropnum++) {
+		dmem_addr = UTIL_DM_DROP_CNTR;
+		val = be32_to_cpu(pe_dmem_read(UTIL_ID, dmem_addr, 4));
+		util_drop_counter[dropnum] = val;
+		num_util_drops += val;
+		if (drops_do_clear)
+			pe_dmem_write(UTIL_ID, 0, dmem_addr, 4);
+	}
+	if (drops_do_clear)
+		pe_start(ctrl, (1 << UTIL_ID));
+#endif
+	for (tmu = 0; tmu < 4; tmu++) {
+		for (queue = 0; queue < 16; queue++) {
+			qm_read_drop_stat(tmu, queue, &tmu_drops[tmu][queue],
+					  drops_do_clear);
+			num_tmu_drops += tmu_drops[tmu][queue];
+		}
+	}
+
+	if (num_class_drops == 0 && num_util_drops == 0 && num_tmu_drops == 0)
+		len += sprintf(buf + len, "No PE drops\n\n");
+
+	if (num_class_drops > 0) {
+		len += sprintf(buf + len, "Class PE drops --\n");
+		for (dropnum = 0; dropnum < CLASS_NUM_DROP_COUNTERS;
+			dropnum++) {
+			if (class_drop_counter[dropnum] > 0)
+				len += sprintf(buf + len, "  %s: %d\n",
+					class_drop_description[dropnum],
+					class_drop_counter[dropnum]);
+		}
+		len += sprintf(buf + len, "\n");
+	}
+
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+	if (num_util_drops > 0) {
+		len += sprintf(buf + len, "Util PE drops --\n");
+		for (dropnum = 0; dropnum < UTIL_NUM_DROP_COUNTERS; dropnum++) {
+			if (util_drop_counter[dropnum] > 0)
+				len += sprintf(buf + len, "  %s: %d\n",
+					util_drop_description[dropnum],
+					util_drop_counter[dropnum]);
+		}
+		len += sprintf(buf + len, "\n");
+	}
+#endif
+	if (num_tmu_drops > 0) {
+		len += sprintf(buf + len, "TMU drops --\n");
+		for (tmu = 0; tmu < 4; tmu++) {
+			for (queue = 0; queue < 16; queue++) {
+				if (tmu_drops[tmu][queue] > 0)
+					len += sprintf(buf + len,
+						"  TMU%d-Q%d: %d\n"
+					, tmu, queue, tmu_drops[tmu][queue]);
+			}
+		}
+		len += sprintf(buf + len, "\n");
+	}
+
+	return len;
+}
+
+static ssize_t pfe_show_tmu0_queues(struct device *dev, struct device_attribute
+					*attr, char *buf)
+{
+	return tmu_queues(buf, 0);
+}
+
+static ssize_t pfe_show_tmu1_queues(struct device *dev, struct device_attribute
+					*attr, char *buf)
+{
+	return tmu_queues(buf, 1);
+}
+
+static ssize_t pfe_show_tmu2_queues(struct device *dev, struct device_attribute
+					*attr, char *buf)
+{
+	return tmu_queues(buf, 2);
+}
+
+static ssize_t pfe_show_tmu3_queues(struct device *dev, struct device_attribute
+					*attr, char *buf)
+{
+	return tmu_queues(buf, 3);
+}
+
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+static ssize_t pfe_set_util(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	util_do_clear = kstrtoul(buf, NULL, 0);
+	return count;
+}
+
+static ssize_t pfe_show_util(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	ssize_t len = 0;
+	struct pfe_ctrl *ctrl = &pfe->ctrl;
+
+	len += block_version(buf + len, UTIL_VERSION);
+
+	pe_sync_stop(ctrl, (1 << UTIL_ID));
+	len += display_pe_status(buf + len, UTIL_ID, UTIL_DM_PESTATUS,
+					util_do_clear);
+	pe_start(ctrl, (1 << UTIL_ID));
+
+	len += sprintf(buf + len, "pe status:   %x\n", readl(UTIL_PE_STATUS));
+	len += sprintf(buf + len, "max buf cnt: %x\n",
+			readl(UTIL_MAX_BUF_CNT));
+	len += sprintf(buf + len, "tsq max cnt: %x\n",
+			readl(UTIL_TSQ_MAX_CNT));
+
+	return len;
+}
+#endif
+
+static ssize_t pfe_show_bmu(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	ssize_t len = 0;
+
+	len += bmu(buf + len, 1, BMU1_BASE_ADDR);
+	len += bmu(buf + len, 2, BMU2_BASE_ADDR);
+
+	return len;
+}
+
+static ssize_t pfe_show_hif(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	ssize_t len = 0;
+
+	len += sprintf(buf + len, "hif:\n  ");
+	len += block_version(buf + len, HIF_VERSION);
+
+	len += sprintf(buf + len, "  tx curr bd:    %x\n",
+			readl(HIF_TX_CURR_BD_ADDR));
+	len += sprintf(buf + len, "  tx status:     %x\n",
+			readl(HIF_TX_STATUS));
+	len += sprintf(buf + len, "  tx dma status: %x\n",
+			readl(HIF_TX_DMA_STATUS));
+
+	len += sprintf(buf + len, "  rx curr bd:    %x\n",
+			readl(HIF_RX_CURR_BD_ADDR));
+	len += sprintf(buf + len, "  rx status:     %x\n",
+			readl(HIF_RX_STATUS));
+	len += sprintf(buf + len, "  rx dma status: %x\n",
+			readl(HIF_RX_DMA_STATUS));
+
+	len += sprintf(buf + len, "hif nocopy:\n  ");
+	len += block_version(buf + len, HIF_NOCPY_VERSION);
+
+	len += sprintf(buf + len, "  tx curr bd:    %x\n",
+			readl(HIF_NOCPY_TX_CURR_BD_ADDR));
+	len += sprintf(buf + len, "  tx status:     %x\n",
+			readl(HIF_NOCPY_TX_STATUS));
+	len += sprintf(buf + len, "  tx dma status: %x\n",
+			readl(HIF_NOCPY_TX_DMA_STATUS));
+
+	len += sprintf(buf + len, "  rx curr bd:    %x\n",
+			readl(HIF_NOCPY_RX_CURR_BD_ADDR));
+	len += sprintf(buf + len, "  rx status:     %x\n",
+			readl(HIF_NOCPY_RX_STATUS));
+	len += sprintf(buf + len, "  rx dma status: %x\n",
+			readl(HIF_NOCPY_RX_DMA_STATUS));
+
+	return len;
+}
+
+static ssize_t pfe_show_gpi(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	ssize_t len = 0;
+
+	len += gpi(buf + len, 0, EGPI1_BASE_ADDR);
+	len += gpi(buf + len, 1, EGPI2_BASE_ADDR);
+	len += gpi(buf + len, 3, HGPI_BASE_ADDR);
+
+	return len;
+}
+
+static ssize_t pfe_show_pfemem(struct device *dev, struct device_attribute
+				*attr, char *buf)
+{
+	ssize_t len = 0;
+	struct pfe_memmon *memmon = &pfe->memmon;
+
+	len += sprintf(buf + len, "Kernel Memory: %d Bytes (%d KB)\n",
+		memmon->kernel_memory_allocated,
+		(memmon->kernel_memory_allocated + 1023) / 1024);
+
+	return len;
+}
+
+static ssize_t pfe_show_crc_revalidated(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	u64 crc_validated = 0;
+	ssize_t len = 0;
+	int id, phyid;
+
+	len += sprintf(buf + len, "FCS re-validated by PFE:\n");
+
+	for (phyid = 0; phyid < 2; phyid++) {
+		crc_validated = 0;
+		for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) {
+			crc_validated += be32_to_cpu(pe_dmem_read(id,
+				CLASS_DM_CRC_VALIDATED + (phyid * 4), 4));
+		}
+		len += sprintf(buf + len, "MAC %d:\n    count:%10llu\n",
+			       phyid, crc_validated);
+	}
+
+	return len;
+}
+
+#ifdef HIF_NAPI_STATS
+static ssize_t pfe_show_hif_napi_stats(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pfe *pfe = platform_get_drvdata(pdev);
+	ssize_t len = 0;
+
+	len += sprintf(buf + len, "sched:  %u\n",
+			pfe->hif.napi_counters[NAPI_SCHED_COUNT]);
+	len += sprintf(buf + len, "poll:   %u\n",
+			pfe->hif.napi_counters[NAPI_POLL_COUNT]);
+	len += sprintf(buf + len, "packet: %u\n",
+			pfe->hif.napi_counters[NAPI_PACKET_COUNT]);
+	len += sprintf(buf + len, "budget: %u\n",
+			pfe->hif.napi_counters[NAPI_FULL_BUDGET_COUNT]);
+	len += sprintf(buf + len, "desc:   %u\n",
+			pfe->hif.napi_counters[NAPI_DESC_COUNT]);
+	len += sprintf(buf + len, "full:   %u\n",
+			pfe->hif.napi_counters[NAPI_CLIENT_FULL_COUNT]);
+
+	return len;
+}
+
+static ssize_t pfe_set_hif_napi_stats(struct device *dev,
+				      struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pfe *pfe = platform_get_drvdata(pdev);
+
+	memset(pfe->hif.napi_counters, 0, sizeof(pfe->hif.napi_counters));
+
+	return count;
+}
+
+static DEVICE_ATTR(hif_napi_stats, 0644, pfe_show_hif_napi_stats,
+			pfe_set_hif_napi_stats);
+#endif
+
+static DEVICE_ATTR(class, 0644, pfe_show_class, pfe_set_class);
+static DEVICE_ATTR(tmu, 0644, pfe_show_tmu, pfe_set_tmu);
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+static DEVICE_ATTR(util, 0644, pfe_show_util, pfe_set_util);
+#endif
+static DEVICE_ATTR(bmu, 0444, pfe_show_bmu, NULL);
+static DEVICE_ATTR(hif, 0444, pfe_show_hif, NULL);
+static DEVICE_ATTR(gpi, 0444, pfe_show_gpi, NULL);
+static DEVICE_ATTR(drops, 0644, pfe_show_drops, pfe_set_drops);
+static DEVICE_ATTR(tmu0_queues, 0444, pfe_show_tmu0_queues, NULL);
+static DEVICE_ATTR(tmu1_queues, 0444, pfe_show_tmu1_queues, NULL);
+static DEVICE_ATTR(tmu2_queues, 0444, pfe_show_tmu2_queues, NULL);
+static DEVICE_ATTR(tmu3_queues, 0444, pfe_show_tmu3_queues, NULL);
+static DEVICE_ATTR(pfemem, 0444, pfe_show_pfemem, NULL);
+static DEVICE_ATTR(fcs_revalidated, 0444, pfe_show_crc_revalidated, NULL);
+
+int pfe_sysfs_init(struct pfe *pfe)
+{
+	if (device_create_file(pfe->dev, &dev_attr_class))
+		goto err_class;
+
+	if (device_create_file(pfe->dev, &dev_attr_tmu))
+		goto err_tmu;
+
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+	if (device_create_file(pfe->dev, &dev_attr_util))
+		goto err_util;
+#endif
+
+	if (device_create_file(pfe->dev, &dev_attr_bmu))
+		goto err_bmu;
+
+	if (device_create_file(pfe->dev, &dev_attr_hif))
+		goto err_hif;
+
+	if (device_create_file(pfe->dev, &dev_attr_gpi))
+		goto err_gpi;
+
+	if (device_create_file(pfe->dev, &dev_attr_drops))
+		goto err_drops;
+
+	if (device_create_file(pfe->dev, &dev_attr_tmu0_queues))
+		goto err_tmu0_queues;
+
+	if (device_create_file(pfe->dev, &dev_attr_tmu1_queues))
+		goto err_tmu1_queues;
+
+	if (device_create_file(pfe->dev, &dev_attr_tmu2_queues))
+		goto err_tmu2_queues;
+
+	if (device_create_file(pfe->dev, &dev_attr_tmu3_queues))
+		goto err_tmu3_queues;
+
+	if (device_create_file(pfe->dev, &dev_attr_pfemem))
+		goto err_pfemem;
+
+	if (device_create_file(pfe->dev, &dev_attr_fcs_revalidated))
+		goto err_crc_revalidated;
+
+#ifdef HIF_NAPI_STATS
+	if (device_create_file(pfe->dev, &dev_attr_hif_napi_stats))
+		goto err_hif_napi_stats;
+#endif
+
+	return 0;
+
+#ifdef HIF_NAPI_STATS
+err_hif_napi_stats:
+	device_remove_file(pfe->dev, &dev_attr_fcs_revalidated);
+#endif
+
+err_crc_revalidated:
+	device_remove_file(pfe->dev, &dev_attr_pfemem);
+
+err_pfemem:
+	device_remove_file(pfe->dev, &dev_attr_tmu3_queues);
+
+err_tmu3_queues:
+	device_remove_file(pfe->dev, &dev_attr_tmu2_queues);
+
+err_tmu2_queues:
+	device_remove_file(pfe->dev, &dev_attr_tmu1_queues);
+
+err_tmu1_queues:
+	device_remove_file(pfe->dev, &dev_attr_tmu0_queues);
+
+err_tmu0_queues:
+	device_remove_file(pfe->dev, &dev_attr_drops);
+
+err_drops:
+	device_remove_file(pfe->dev, &dev_attr_gpi);
+
+err_gpi:
+	device_remove_file(pfe->dev, &dev_attr_hif);
+
+err_hif:
+	device_remove_file(pfe->dev, &dev_attr_bmu);
+
+err_bmu:
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+	device_remove_file(pfe->dev, &dev_attr_util);
+
+err_util:
+#endif
+	device_remove_file(pfe->dev, &dev_attr_tmu);
+
+err_tmu:
+	device_remove_file(pfe->dev, &dev_attr_class);
+
+err_class:
+	return -1;
+}
+
+void pfe_sysfs_exit(struct pfe *pfe)
+{
+#ifdef HIF_NAPI_STATS
+	device_remove_file(pfe->dev, &dev_attr_hif_napi_stats);
+#endif
+	device_remove_file(pfe->dev, &dev_attr_fcs_revalidated);
+	device_remove_file(pfe->dev, &dev_attr_pfemem);
+	device_remove_file(pfe->dev, &dev_attr_tmu3_queues);
+	device_remove_file(pfe->dev, &dev_attr_tmu2_queues);
+	device_remove_file(pfe->dev, &dev_attr_tmu1_queues);
+	device_remove_file(pfe->dev, &dev_attr_tmu0_queues);
+	device_remove_file(pfe->dev, &dev_attr_drops);
+	device_remove_file(pfe->dev, &dev_attr_gpi);
+	device_remove_file(pfe->dev, &dev_attr_hif);
+	device_remove_file(pfe->dev, &dev_attr_bmu);
+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED)
+	device_remove_file(pfe->dev, &dev_attr_util);
+#endif
+	device_remove_file(pfe->dev, &dev_attr_tmu);
+	device_remove_file(pfe->dev, &dev_attr_class);
+}
--- /dev/null
+++ b/drivers/staging/fsl_ppfe/pfe_sysfs.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#ifndef _PFE_SYSFS_H_
+#define _PFE_SYSFS_H_
+
+#include <linux/proc_fs.h>
+
+u32 qm_read_drop_stat(u32 tmu, u32 queue, u32 *total_drops, int do_reset);
+
+int pfe_sysfs_init(struct pfe *pfe);
+void pfe_sysfs_exit(struct pfe *pfe);
+
+#endif /* _PFE_SYSFS_H_ */
